A Comprehensive Guide to Resolving TV Picture Issues using Step-by-Step Solutions

Television is an essential part of our daily lives, providing entertainment, news, and information. However, sometimes the TV picture can become distorted or have issues, making the viewing experience less enjoyable. If you’re experiencing problems with your TV picture, don’t worry! This troubleshooting guide will walk you through some common picture problems and provide step-by-step solutions.

1. Poor Picture Quality: Is your TV picture looking grainy or pixelated? This could be due to a weak or poor signal. Check your antenna or cable connections to ensure they are secure and in good condition. You may also want to check if there are any obstacles blocking the signal, such as tall buildings or trees. If the issue persists, try adjusting the picture settings on your TV to see if that improves the quality.

2. No Picture or Blank Screen: Are you seeing a blank screen or no picture at all? This could be a sign of a problem with the power supply or the TV’s internal components. First, check if the TV is properly plugged in and that the power source is working. If it is, try unplugging the TV for a few minutes and then plugging it back in. If the issue still persists, you may want to consider contacting a professional for further assistance.

3. Distorted Colors: Are the colors on your TV screen appearing distorted or off? This could be due to incorrect color settings or a problem with the color calibration. Check the picture settings on your TV and make sure the color settings are properly adjusted. You may also want to try calibrating the colors using the TV’s built-in calibration tool or a calibration disc.

4. Ghosting or Double Images: Do you see shadowy or double images on your TV screen? This phenomenon is known as ghosting and can be caused by a variety of factors, including poor signal quality, outdated software, or interference from nearby electronic devices. Try adjusting the antenna or cable connections, updating the TV’s software, or moving any electronic devices away from the TV to see if that resolves the issue.

By following these step-by-step solutions, you can troubleshoot and fix common TV picture problems. Remember to refer to your TV’s manual or contact the manufacturer for specific instructions and additional support, if needed. Enjoy your favorite shows and movies with a clear and crisp TV picture!

Troubleshooting Guide: TV Picture Problems and Fixes

Having a problem with your TV’s picture can be frustrating. But don’t worry, we’re here to help. In this troubleshooting guide, we’ll go through some common TV picture problems and their possible fixes. By following these step-by-step solutions, you’ll be able to get your TV picture back to its optimal quality.

No Picture or Black Screen:

If your TV is not showing any picture or has a black screen, start by checking the power source. Make sure that the TV is properly plugged in and the power outlet is working. If the TV is connected to a power strip, try plugging it directly into the wall socket. Also, check if the TV’s indicator light is on, as it indicates that the TV is receiving power.

If the power source is not the issue, check the video input settings. Make sure that the correct input source is selected on your TV. Use the remote control to cycle through the available inputs and see if the picture appears.

Another possible cause could be a faulty HDMI cable or connection. Try using a different HDMI cable or connecting the TV to another device to see if the picture appears. If it does, then the issue is with the cable or connection.

Note: If none of these solutions work, it might indicate a more serious hardware problem. In this case, it is best to contact a professional technician.

Poor Picture Quality:

If you’re experiencing poor picture quality on your TV, there are a few things you can try to improve it. First, check the picture mode settings on your TV. Make sure that it is set to a mode that suits your viewing preferences. You can try adjusting the brightness, contrast, and sharpness settings to see if it improves the picture quality.

Next, check the video source. If you’re watching a low-resolution video, the picture quality may be affected. Try watching a high-definition video or connecting your TV to a better video source to see if it improves the picture quality.

Lastly, make sure that the TV screen is clean. Dust and fingerprints can affect the picture quality. Use a soft, lint-free cloth to gently clean the screen.

Distorted or Colorful Picture:

If your TV picture is distorted or displaying strange colors, start by checking the cables and connections. Make sure that they are securely plugged in and not damaged. If you’re using component or composite cables, make sure that the colors are connected correctly.

Next, check the picture mode settings on your TV. Try changing the picture mode to see if it resolves the issue. If the problem persists, try resetting the TV’s picture settings to the default factory settings.

If none of these solutions work, it might indicate a problem with the TV’s hardware. In this case, it is best to contact a professional technician to diagnose and repair the issue.

By following these troubleshooting steps, you’ll be able to fix common TV picture problems and enjoy your favorite shows and movies with optimal picture quality. If the issues persist, don’t hesitate to reach out to a professional technician for further assistance.

Troubleshooting Guide: TV Picture Problems and Fixes

If you’re experiencing problems with your TV picture, don’t fret. This troubleshooting guide will help you identify the issue and provide step-by-step solutions to get your picture back to its perfect form.

No Picture: If your TV isn’t displaying any picture at all, there are a few things you can check. Start by making sure the TV is plugged in and the power is turned on. If that doesn’t solve the issue, try changing the input source on your TV or pressing the “Input” or “Source” button on your remote to cycle through the available inputs.

Poor Picture Quality: If your TV picture quality has deteriorated, there are a few possible causes. Start by checking the cables and connections between your TV and any external devices, such as cable boxes or DVD players. Make sure they are securely plugged in and that the cables are undamaged. If the cables and connections are fine, try adjusting the picture settings on your TV. You can usually find these settings in the menu or settings section of your TV.

Distorted Picture: If your TV picture is distorted or warped, try adjusting the aspect ratio or zoom settings on your TV. These settings control how the picture is displayed on the screen. You can usually access these settings through the menu or settings section of your TV. If adjusting the aspect ratio or zoom settings doesn’t fix the issue, there may be an issue with the TV’s display panel. In this case, you may need to contact a professional for repairs.

Color Issues: If your TV picture is displaying incorrect colors or has a color tint, there are a few things you can try. Start by checking the color settings on your TV. You can usually adjust the color settings in the menu or settings section of your TV. Make sure the color settings are set to their default or recommended values. If the color issues persist, try adjusting the color settings on the external device connected to your TV. For example, if you’re watching a DVD and experiencing color issues, try adjusting the color settings on the DVD player.

Screen Flickering: If your TV screen is flickering or flashing, there are a few possible causes. Start by checking the video cables and connections between your TV and any external devices. Make sure they are securely plugged in and that the cables are undamaged. If the cables and connections are fine, try adjusting the refresh rate or resolution settings on your TV. You can usually access these settings through the menu or settings section of your TV. If the screen flickering persists, there may be an issue with the TV’s display panel or internal components. In this case, you may need to contact a professional for repairs.

By following these troubleshooting steps, you should be able to resolve common TV picture problems and get your TV back to its optimal performance. If the issue persists, it may be time to contact a professional for further assistance. Remember, always refer to your TV’s user manual for specific instructions and recommendations.

Section 1: TV Display Issues

Television display issues can be frustrating, but with the right troubleshooting steps, you can often resolve them on your own. If you’re experiencing problems with your TV’s display, try the following solutions.

1. Check the connections: Ensure that all cables, including HDMI, VGA, or component cables, are securely connected to both your TV and the source device (e.g., cable box, DVD player, game console). Sometimes loose or damaged cables can cause display problems.

2. Adjust the display settings: Access the settings menu on your TV and navigate to the display or picture settings. Check the brightness, contrast, and color settings to ensure they are properly adjusted. You may also want to experiment with other settings, such as sharpness or picture mode, to see if they improve the display quality.

3. Restart the TV and source devices: Power off both your TV and the source device, such as a cable box or Blu-ray player. After a few seconds, turn them back on. This can help reset any temporary glitches in the system and restore the display.

4. Update the software: Check if there are any firmware updates available for your TV. Manufacturers often release updates that address software bugs and improve performance, including display issues. Consult your TV’s user manual or visit the manufacturer’s website for instructions on how to update the software.

5. Try a different input or source device: Connect a different device, such as a DVD player or gaming console, to one of the available inputs on your TV. If the display issue persists, it could indicate a problem with the TV itself. However, if the issue is resolved with the new device, it suggests the original source device may be causing the problem.

6. Check for interference: Nearby electronic devices or sources of electromagnetic fields, such as speakers or cell phones, can sometimes interfere with the TV’s display. Move any such devices away from the TV and see if the display improves.

7. Contact customer support: If none of the above solutions resolve your TV’s display issues, contact the manufacturer’s customer support for further assistance. They may be able to provide additional troubleshooting steps or advise on whether a repair or replacement is necessary.

By following these troubleshooting steps, you can often identify and fix common display problems with your TV. However, if the issue persists or you’re unsure about any steps, it’s always best to consult the manufacturer or a professional technician for help.

Black Screen

If you’re experiencing a black screen on your TV, try these troubleshooting steps to fix the issue:

1. Check the connections:

Make sure all cables are securely connected to the correct ports on your TV and any external devices (such as a cable/satellite box, DVD player, or gaming console). Loose or faulty connections can cause a black screen.

2. Power cycle your devices:

Turn off your TV, unplug it from the power source, and disconnect any connected devices. Wait for a few minutes, then plug everything back in and power on your TV. This can help reset the connections and fix any temporary issues.

3. Adjust the display settings:

If your TV has a menu or settings button on the remote control, try accessing the menu and adjusting the display settings. Look for options like brightness, contrast, and picture mode. Sometimes incorrect settings can cause a black screen.

4. Test different inputs:

Try connecting a different device (such as a DVD player or gaming console) to your TV using a different cable and port. If the black screen issue is only happening with a specific input or device, there may be a problem with that input or device.

5. Restart your TV:

Some TVs have a built-in restart or reboot option in the menu. Try using this option to restart your TV and see if it resolves the black screen issue.

Note: If none of the above steps resolve the black screen issue, it may indicate a hardware problem with your TV. In this case, it’s recommended to contact the manufacturer or a professional technician for further assistance.

Flickering Picture

If you’re experiencing a flickering picture on your TV, it can be frustrating and may interfere with your viewing experience. Here are some common causes and solutions for this problem:

1. Loose cable connections: Check that all the cables connecting your TV to the set-top box or other devices are securely plugged in. A loose connection can cause the picture to flicker. Unplug and reinsert the cables to ensure a tight connection.

2. Power fluctuations: Fluctuations in your home’s power supply can also cause a flickering picture. To troubleshoot this issue, try plugging your TV into a different power outlet or using a surge protector. If the flickering stops, it indicates a power issue.

3. Syncing issues: Sometimes, a flickering picture can be the result of a syncing problem between your TV and the connected devices. Make sure all devices are using the same resolution and refresh rate settings. Adjust the settings if necessary.

4. Environmental interference: External factors such as nearby electrical appliances or devices can cause interference and result in a flickering picture. Move any potential sources of interference away from your TV or switch them off to see if the flickering stops.

5. Software or firmware updates: Check if there are any available software or firmware updates for your TV. Outdated software can sometimes cause picture issues. Follow the manufacturer’s instructions to update your TV’s software or firmware.

If none of these troubleshooting steps resolve the issue, it may be a sign of a hardware problem. In such cases, it is recommended to contact a professional technician or the manufacturer for further assistance.

Remember to always refer to your TV’s user manual for specific instructions and guidelines related to troubleshooting and maintenance.

Distorted Image

If you’re experiencing a distorted image on your TV screen, it can be quite frustrating. Fortunately, there are several common causes for this problem, and most can be easily resolved.

One possible cause of a distorted image is a poor signal. Check your cable or satellite connections to ensure they are secure and in good condition. If you’re using an antenna, make sure it’s positioned correctly and try adjusting it for better reception.

Another potential cause is interference from other electronic devices. Move any devices that could be causing interference, such as speakers or radios, away from your TV. Additionally, try turning off any nearby wireless devices, as they can also cause image distortion.

If none of these solutions fix the problem, it’s possible that there could be an issue with your TV’s hardware. Check the video cables for any signs of damage or wear, and replace them if necessary. It’s also a good idea to check for any available firmware updates for your TV, as these updates can sometimes fix image distortion issues.

If you’re still experiencing a distorted image after trying these solutions, it may be time to contact a professional for further assistance. They can help diagnose the problem and provide recommendations for repair or replacement if necessary.

Section 2: Color and Contrast Problems

1. Check your TV settings: Make sure the color and contrast settings on your TV are properly adjusted. Navigate to the settings menu on your TV’s remote control and look for options such as “Color” or “Picture Settings.” Make sure the color and contrast sliders are set to a level that provides a desirable picture quality.

2. Test different picture modes: Most modern TVs come with various picture modes, such as Standard, Vivid, or Cinema. Experiment with different picture modes to see if any of them provide better color and contrast. You can usually switch between picture modes through the settings menu on your TV remote.

3. Adjust the backlight settings: If you find that the colors on your TV are either too dull or too bright, adjusting the backlight settings might help. Go to your TV’s settings menu and look for options related to backlight or brightness. Increase or decrease the backlight settings until you achieve a better color and contrast balance.

4. Check your source device: Sometimes, color and contrast problems can be attributed to the source device you are using, such as a cable box or a gaming console. Ensure that the source device’s video output settings are properly configured. If possible, try connecting your TV to a different source device to see if the color and contrast issues persist.

5. Update your TV’s firmware: Outdated firmware can sometimes cause color and contrast problems. Check if there are any available firmware updates for your TV model by visiting the manufacturer’s website. If an update is available, follow the instructions provided to install the latest firmware and see if it resolves the color and contrast issues.

6. Reset your TV: If none of the above steps work, you may need to perform a factory reset on your TV. Be aware that a factory reset will erase all settings and personal preferences, so make sure to take note of any important settings before proceeding. Refer to your TV’s user manual or the manufacturer’s website for instructions on how to perform a factory reset.

If you have tried all the troubleshooting steps above and are still experiencing color and contrast problems with your TV picture, it may be necessary to contact a professional technician for further assistance.

Overexposed Image

An overexposed image on your TV screen can be caused by various factors. One possible cause is incorrect settings on your TV. It is advisable to check the brightness, contrast, and backlight settings to ensure they are not set too high.

To adjust the brightness, go to the “Display” or “Picture” settings on your TV’s menu. Gradually decrease the brightness until the overexposed areas of the image become more balanced. Similarly, you can adjust the contrast and backlight settings to optimize the picture quality.

If adjusting the settings does not resolve the overexposed image issue, it could be a problem with the source material. Certain videos or images may be recorded or processed in a way that results in overexposure. Try playing different content to see if the problem persists.

Another possible cause of an overexposed image is a faulty HDMI cable. Ensure that the cable is securely connected to both the TV and the source device. If you have a spare HDMI cable, try replacing it to see if that resolves the issue.

In some cases, an overexposed image can be a sign of a malfunctioning TV display. If none of the above solutions work, you may need to contact a professional for further assistance or consider repairing or replacing your TV.

• Adjust brightness, contrast, and backlight settings
• Check source material
• Ensure HDMI cable is securely connected
• Consider professional assistance or repair/replace TV

|

Color Saturation Issues

Color saturation issues on your TV can make the picture appear dull, washed out, or overly vibrant. If you’re experiencing color saturation problems, follow these steps to troubleshoot and fix the issue:

1. Check the Picture Settings

Start by checking the picture settings on your TV. Look for options like “Color,” “Saturation,” or “Picture Mode.” Adjust these settings to see if it improves the color saturation. Make sure the settings are not set too high or too low.

2. Use the TV Calibration Feature

Many modern TVs have a built-in calibration feature that can help you adjust the picture settings for optimal color saturation. Consult your TV’s user manual to find out how to access and use this feature. Follow the instructions and calibrate the TV settings accordingly.

3. Check the Source Device

If the color saturation issues are specific to a certain source device, such as a cable box or a streaming device, check the settings on that device as well. Some devices may have their own color settings that can affect the overall color saturation on your TV.

4. Reset the TV

If none of the above steps work, try resetting your TV to its default factory settings. This can help resolve any software or firmware-related issues that may be causing the color saturation problems. Refer to your TV’s user manual for instructions on how to perform a factory reset.

5. Professional Calibration

If all else fails, consider seeking professional help for TV calibration. A professional calibrator can accurately adjust the color settings on your TV and ensure optimal color saturation. However, this option may incur additional costs.

Note: It’s important to keep in mind that color perception can also vary from person to person. What looks oversaturated to one person might appear perfectly normal to another. If you’re unsure whether the color saturation is a genuine problem or a matter of personal preference, it can be helpful to compare the picture quality with other TVs or reference images.

Poor Contrast

If you’re experiencing poor contrast on your TV, the picture may appear washed out or lacking definition. This can make it difficult to see details and colors with accuracy. There are a few things you can do to improve the contrast on your TV:

1. Adjust the brightness and contrast settings:

Check your TV’s settings menu and look for options to adjust the brightness and contrast. Increasing the contrast can help enhance the difference between light and dark areas, improving the overall picture quality.

2. Check the backlight settings:

If your TV has a backlight setting, make sure it is set to an appropriate level. Too high or too low backlight can affect the contrast. Adjusting the backlight to a suitable level can help improve contrast and prevent the picture from looking washed out.

3. Avoid bright lighting conditions:

If you’re watching TV in a room with bright lighting, it can affect the contrast on your screen. Try to minimize ambient light by closing curtains or blinds or adjusting the positioning of lights in the room. This can help improve the contrast and make the picture appear more vibrant.

4. Check your video source:

If you’re using an external device, such as a cable or satellite box, make sure the video settings on that device are properly adjusted. Some devices have their own settings for brightness, contrast, and other picture options that may affect the overall contrast on your TV. Consult the device’s manual or menu options to make any necessary adjustments.

5. Consider professional calibration:

If you’ve tried adjusting the settings on your TV and are still experiencing poor contrast, you may want to consider professional calibration. A trained technician can analyze your TV’s settings and make precise adjustments to optimize the contrast and overall picture quality. This can be especially useful if you’re using your TV for critical color-sensitive tasks, such as video editing or graphic design.

By following these steps, you can improve the contrast on your TV and enjoy a more vibrant and defined picture.

Section 3: Sound and Picture Sync Issues

If you are experiencing sound and picture sync issues with your TV, it can be quite frustrating. Here are some common problems and their potential fixes.

1. Delayed Audio:

If you notice a delay between the sound and the picture, try the following:

- Check the audio settings on your TV. Ensure that any “Audio Delay” or “Audio Sync” features are disabled.

- Connect your TV directly to the cable or satellite box, bypassing any other devices like soundbars or AV receivers that may be introducing the delay.

2. Audio Ahead of Picture:

If the audio is ahead of the picture, try these steps:

- Check the audio settings on your TV. Look for any options related to “Audio Delay” or “Audio Sync” and adjust them accordingly.

- Restart your TV and the source device (cable box, DVD player, etc.). Sometimes, a simple reboot can resolve sync issues.

3. Random Sound and Picture Sync Issues:

If you are experiencing random sync issues, here are some troubleshooting steps:

- Ensure that all your cables are securely connected. Loose or damaged cables can cause synchronization problems.

- Update the firmware on your TV. Manufacturers often release firmware updates that can fix various issues, including sync problems.

- Try connecting your devices using different HDMI or audio cables. Faulty cables can sometimes cause sync issues.

- If none of the above steps work, try resetting your TV to its factory settings. This will erase all custom settings and might resolve the issue.

By following these troubleshooting steps, you should be able to resolve most sound and picture sync issues with your TV. If the problem persists, it may be worth contacting the manufacturer or seeking professional assistance.

Audio Lag

If you’re experiencing audio lag on your TV, follow these steps to troubleshoot and fix the issue:

1. Check the audio cables: Make sure all audio cables are securely connected to the correct ports on both the TV and the external audio devices, such as soundbars or speakers.
2. Adjust audio settings: Navigate to the audio settings on your TV and check if there are any options related to audio delay or synchronization. Adjust these settings to reduce or eliminate the audio lag.
3. Restart devices: Sometimes, a simple restart can resolve audio lag issues. Turn off your TV, audio devices, and streaming devices. Unplug them from the power source for about a minute, then plug them back in and turn them on.
4. Update firmware: Ensure that your TV’s firmware and the firmware of any connected audio devices are up to date. Manufacturers often release firmware updates that address audio lag issues and provide improved performance.
5. Check sources: If the audio lag only occurs with certain sources, such as a specific streaming app or HDMI input, try switching to a different source and see if the issue persists. If the lag is specific to one source, it may indicate a problem with that particular source.
6. Reduce signal interference: Audio lag can sometimes be caused by signal interference. Keep your TV and audio devices away from other electronics that could cause interference, such as wireless routers, cordless phones, or microwave ovens.
7. Reset TV settings: If none of the above steps resolved the issue, try resetting your TV to its factory settings. Refer to your TV’s user manual or manufacturer’s website for instructions on how to perform a factory reset.

If you have tried all the above steps and are still experiencing audio lag, it may be worth contacting the manufacturer’s customer support for further assistance or considering professional repair services.

Picture Lag

If you are experiencing picture lag on your TV, it can be frustrating and can ruin the viewing experience. Here are some steps you can take to troubleshoot and fix the issue:

By following these troubleshooting steps, you should be able to identify and fix the picture lag issue on your TV. Enjoy uninterrupted and smooth viewing!

Delayed Audio

If you are experiencing a delay in the audio when watching TV, follow these steps to troubleshoot the problem:

By following these troubleshooting steps, you should be able to resolve the issue of delayed audio and enjoy a synchronized audio-visual experience while watching TV.

Section 4: Signal Reception Problems

If you’re experiencing signal reception problems with your TV, it can be frustrating. However, there are several steps you can take to diagnose and fix the issue.

Here are some common signal reception problems and their potential solutions:

• No signal or weak signal: Check the connections between your TV and cable/satellite box, ensuring they are secure. If using an antenna, make sure it is properly installed and oriented towards the broadcasting tower. You may also want to try a signal amplifier to improve reception.
• Poor picture quality: If the picture on your TV is pixelated or blurry, it could be due to a weak signal. Check the signal strength in the TV’s settings menu. Try repositioning your antenna or removing any obstacles blocking the signal. Also, consider upgrading to a better antenna or using a signal booster.
• Loss of channels: If you suddenly lose channels that were previously available, perform a channel scan on your TV. This will refresh the channel list and potentially restore any missing channels. If this doesn’t work, contact your service provider for assistance.
• Frozen or pixelated picture: If your TV picture freezes or becomes pixelated, it could be due to a weak signal or interference. Check the signal strength and quality in the TV’s settings menu. Make sure there are no electrical devices or appliances causing interference nearby. If the issue persists, contact your service provider.

If none of these solutions solve your signal reception problems, it may be worth contacting a professional technician to investigate further.

Weak Signal

If you are experiencing a weak signal on your TV, it can result in poor picture quality or channels not being properly received. Here are some steps you can take to troubleshoot and fix this issue:

1. Check the antenna or cable connection: Make sure that the antenna or cable is securely connected to the TV. Loose or damaged connections can cause a weak signal.
2. Adjust the antenna or reposition it: Try repositioning the antenna to a different location or adjust its direction. Sometimes, simply changing the antenna’s position can improve the signal strength.
3. Scan for channels: Perform a channel scan on your TV to make sure you are receiving all available channels. This will also help identify any weak signals that need to be addressed.
4. Upgrade your antenna or cable: Depending on your location and the distance from the broadcast towers, you may need to invest in a stronger antenna or better quality cable to improve signal reception.
5. Check for interference: Other electrical devices or obstacles near your TV and antenna can interfere with the signal. Move any devices away from the TV and antenna, and remove any obstructions that may be blocking the signal.
6. Consider a signal booster: If you’ve tried all the above steps and are still experiencing a weak signal, you may want to consider using a signal booster. A signal booster can amplify the signal to improve reception.

By following these troubleshooting steps, you should be able to fix the weak signal issue on your TV and enjoy a clear and crisp picture quality.

No Signal

If your TV is displaying “No Signal” on the screen, there could be a few reasons why. Follow these steps to troubleshoot the issue:

1. Check the connections: Make sure that all the cables and connections between your TV and the cable/satellite box, DVD player, or other devices are securely plugged in. Sometimes a loose or faulty connection can result in a “No Signal” message.
2. Switch inputs: Use the remote control or buttons on your TV to switch between different input sources. Make sure that you have selected the correct input source for the device that you are trying to watch.
3. Reset the devices: Power off the TV, cable/satellite box, and any other devices connected to your TV. Unplug the power cords from all the devices and wait for about 30 seconds. Then, plug the power cords back in and turn on the devices one by one. This can help reset the signal and resolve any temporary issues.
4. Scan for channels: If you are using an antenna to watch over-the-air channels, perform a channel scan on your TV to ensure that it is detecting the available channels. Refer to your TV’s manual for instructions on how to perform a channel scan.
5. Check the signal source: If you are using a cable or satellite box, make sure that it is receiving a signal. Check the lights on the front of the box to see if they are on or blinking. If the box is not receiving a signal, contact your service provider for further assistance.
6. Try a different device: If you have another device, such as a DVD player or game console, try connecting it to your TV using the same cables. This can help determine if the issue is with the TV or the original device.

If none of these steps resolve the “No Signal” issue, it may be a more complex problem that requires professional assistance. Contact the manufacturer or a qualified technician for further support.

• Tags:
• picture
• setting
• device
• cable
• check
• try
• issue
• problem
• color
• adjust