How to Easily Fix a Door That Won't Lock - Step-by-Step Instructions

Are you frustrated with a malfunctioning lock that has left you vulnerable and anxious about the security of your home? We understand how unsettling it can be to have a door that refuses to secure properly. But don’t worry, we’re here to help you with a comprehensive step-by-step solution to rectify this problem.

In this article, we will guide you through a series of simple yet effective techniques that can combat your lock issues and restore peace of mind. From identifying the root cause of the problem to implementing the necessary repairs, we will equip you with the knowledge and skills necessary to resolve the issue.

Our aim is to empower you to take matters into your own hands and save precious time and money on professional locksmith services. By following our easy-to-understand instructions and utilizing common household tools, you will gain the confidence to fix the lock on your door without any external assistance.

Whether you have an old, worn-out lock that needs attention or a newly installed lock that’s proving to be troublesome, our step-by-step solution will address a range of lock-related problems. From sticky locks to misaligned strike plates and loose or broken parts, we’ve got you covered.

So, let’s dive into the world of lock repairs and acquire the skills necessary to remedy a faulty lock on your own terms. Prepare to take control of the security of your home and ensure the well-being of yourself and your loved ones.

Identifying the Problem

In order to effectively repair a malfunctioning door lock, it is crucial to first accurately identify the underlying issue. Understanding the root cause of the problem will allow you to take the appropriate steps to resolve it. By carefully observing and analyzing the behavior and condition of the door lock, you can determine the specific problem without the need for professional assistance or unnecessary expenses.

Signs of potential problems

There are several indicators that can help you identify a faulty door lock. These signs include difficulty turning the key, a loose or wobbly lock mechanism, a misaligned latch, or a complete inability to lock the door. By paying attention to these subtle clues, you can start narrowing down the possible issues and gathering the necessary tools or replacement parts.

Cause and effect

In many cases, door lock problems stem from common underlying causes such as worn-out or damaged internal components, improper installation, or a lack of routine maintenance. By understanding the potential causes of the problem, you can determine the most appropriate course of action to rectify it. It is important to note that different types of locks might have different causes for malfunctioning, so it is vital to consider these factors when identifying the specific problem.

Problem-solving approach

By taking a systematic approach to identifying the problem, you can carefully examine the lock, its components, and the surrounding door frame. Start by inspecting the lock cylinder and key, checking for any signs of damage or obstructions. Then, move on to inspect the latch and strike plate, ensuring they are properly aligned and functioning smoothly. By documenting your observations and progress, you can effectively troubleshoot and establish a plan of action for repairing the door lock.

Remember, identifying the problem accurately is the first crucial step towards successfully repairing a malfunctioning door lock. By carefully assessing the signs, causes, and potential solutions, you can save time, money, and frustration in the repair process.

Inspecting the Lock Mechanism

When facing a situation where the door cannot be secured, it is essential to thoroughly inspect the lock mechanism. Understanding how the lock functions and identifying any potential issues or misalignments is crucial in effectively troubleshooting and resolving the problem. This section will guide you through the steps of examining the lock mechanism to identify the root cause of the locking issue. By closely inspecting the various components and evaluating their condition, you will be able to determine the appropriate course of action to repair and restore proper functionality to the lock.

Examining the Door Frame

When troubleshooting a door that fails to lock properly, it is crucial to thoroughly inspect and evaluate the condition of the door frame. This section focuses on examining the door frame to identify any underlying issues that may be preventing the door from locking securely.

A comprehensive examination of the door frame involves carefully assessing its alignment, structure, and integrity. Start by visually inspecting the frame for any visible damage, such as cracks, splits, or warping. Check for loose or missing screws or nails, as these could indicate structural weaknesses.

Next, check for signs of misalignment, which can prevent the door from properly locking. Look for gaps between the door and frame, which may indicate that the frame is not square or has shifted over time. Difficulties in turning the key in the lock or visible misalignment between the strike plate and the latch are also signs of potential misalignment.

Furthermore, inspect the hinges of the door to ensure they are securely attached to the frame. Loose or damaged hinges can cause the door to sag or hang improperly, resulting in difficulties when attempting to lock it.

As you examine the door frame, make note of any observations or issues you identify. This information will be valuable when moving forward with the repair process and may help determine the necessary steps to rectify the problem.

Checking the Strike Plate

In this section, we will examine and evaluate the strike plate on your door to determine if it is the cause of the locking issue. The strike plate is the metal plate attached to the door jamb that the door latch engages with when the door is locked. It is important to ensure that the strike plate is properly aligned and functioning correctly for the door to lock securely.

First, visually inspect the strike plate for any visible signs of damage or wear. Look for any dents, scratches, or bends that may prevent the door latch from fully engaging. If you notice any of these issues, it will be necessary to repair or replace the strike plate.

Next, test the alignment of the strike plate by closing the door and attempting to lock it. Pay attention to how the door latch aligns with the strike plate opening. If the latch easily slides into the opening without resistance and engages securely, the strike plate is likely properly aligned. However, if the latch does not align correctly or requires force to engage, the strike plate may need to be adjusted.

To adjust the strike plate, you will need a screwdriver. Begin by loosening the screws securing the strike plate to the door jamb. Gently shift the strike plate up, down, or to the sides to align it more accurately with the door latch. Once you have made the necessary adjustments, tighten the screws securely, but be careful not to overtighten and damage the strike plate or door jamb.

After adjusting the strike plate, test the door lock again to ensure that the latch aligns correctly and securely engages with the strike plate. If the door still does not lock smoothly, further adjustments or repairs may be required.

In conclusion, checking the strike plate is an essential step in troubleshooting a door that won’t lock. By inspecting for damage, assessing the alignment, and making any necessary adjustments, you can improve the functionality and security of your door.

Gathering the Tools and Materials

Before embarking on the task of restoring your malfunctioning door lock, it is crucial to gather all the necessary tools and materials. By having them ready at hand, you can ensure a smooth and efficient repair process.

To begin, ensure that you have a comprehensive set of screwdrivers. Different types and sizes may be needed to disassemble and reassemble various components of the door lock. Additionally, having a set of Allen wrenches or hex keys can be beneficial for dealing with any specialized screws or bolts.

Next, gather a variety of lubricants. These can include graphite powder, silicone spray, or WD-40. Lubricants are essential for addressing any stiffness or sticking issues present in the lock mechanism. Additionally, they can help prevent future lock problems by keeping the components well-maintained.

Additionally, it’s important to have a selection of replacement parts readily available. This can include spare lock cylinders, latch assemblies, strike plates, screws, and any other components that may be specific to your particular door lock model. It’s always better to have these parts on hand in case any are damaged or missing during the repair process.

Last but not least, ensure you have the necessary safety gear. This can include protective gloves, safety glasses, and a mask to protect yourself from any dust or debris that may be released during the repair process. Your safety should always be a priority when working with tools and dismantling door fixtures.

By gathering all the required tools and materials ahead of time, you can save yourself from unnecessary delays or interruptions during the door lock repair. This preparation will enable you to tackle the task efficiently and effectively, ensuring a successful outcome.

Basic Hand Tools

In order to successfully repair a door that is not locking properly, it is important to have a set of basic hand tools at your disposal. These tools are essential for tackling various tasks and fixing any issues that may be preventing the door from securely locking.

One indispensable tool for door repairs is a screwdriver. This versatile tool comes in various types and sizes, including flathead and Phillips head screwdrivers. It is used for removing or tightening screws on the door hardware, such as hinges, strike plates, or latch mechanisms.

To ensure accuracy and efficiency during the repair process, a tape measure should also be included in your tool kit. This tool enables you to measure the dimensions of the door, evaluate the alignment of components, and identify any discrepancies that may be causing the locking issue.

An adjustable wrench is another essential tool that can be used to tighten or loosen nuts and bolts on the door assembly. It provides a secure grip and allows you to adjust the tension of various door mechanisms, ensuring a smooth locking operation.

In addition, a utility knife is handy for removing any excess material, such as splinters or paint, that may be obstructing the proper functioning of the door lock. Its sharp blade allows for precise cutting and trimming, providing a clean surface for improved locking performance.

Last but not least, a carpenter’s level is a useful tool for checking the horizontal and vertical alignment of the door. By ensuring that the door is perfectly level, you can prevent any misalignment issues that may affect the locking mechanism’s functionality.

By having these basic hand tools readily available, you will be equipped to handle common door locking problems and restore the functionality of your door. Remember to always use these tools responsibly and take necessary safety precautions while performing any repairs.

Replacement Parts

In this section, we will explore the various components that may need to be replaced when repairing a malfunctioning lock on a door. The following sections will provide you with a comprehensive overview of the different parts involved in the lock mechanism, detailing their functions and common issues that may require replacement.

• Lock Cylinder: This crucial component houses the key mechanism and enables the lock to engage or disengage. Over time, a worn or damaged lock cylinder may result in difficulty locking or unlocking the door. To remedy this, a replacement lock cylinder may be necessary.
• Latchbolt: The latchbolt is responsible for securing the door in place when the lock is engaged. If the latchbolt is not properly aligned or damaged, it can prevent the door from locking correctly. Replacing the latchbolt can resolve this issue and restore the lock’s functionality.
• Strike Plate: The strike plate is affixed to the door jamb and provides a stable anchoring point for the latchbolt. If the strike plate is loose or misaligned, it can cause the latchbolt to miss its target and prevent the door from locking. By replacing the strike plate, you can ensure a secure and effective lock operation.
• Deadbolt: A deadbolt is a secondary locking mechanism that provides additional security. If the deadbolt is jammed, damaged, or not engaging properly, it can render the entire locking system ineffective. By replacing the deadbolt, you can restore the door’s ability to lock securely.
• Door Handle or Knob: The door handle or knob is the component used to operate the lock. If the handle or knob is loose, damaged, or broken, it can hinder the locking process. Replacing the door handle or knob can provide a smooth and reliable operation for locking and unlocking the door.

Each of these replacement parts plays a critical role in the functioning of a door lock. By identifying and addressing any issues with these components, you can effectively repair a lock that won’t lock and ensure the security of your door.

Removing the Lock Mechanism

In this section, we will discuss the process of removing the lock mechanism from your door. This step is crucial in the repair process as it allows you to access and work on the lock components more easily.

To begin, you will need to gather the necessary tools for the job. These may include a screwdriver, pliers, and a hammer. It is important to have the right tools on hand to ensure a smooth and efficient removal process.

Once you have your tools ready, start by examining the lock mechanism and identifying any screws or bolts that are holding it in place. Carefully remove these screws or bolts using your screwdriver or pliers, making sure not to strip or damage them in the process.

After removing the fasteners, you may need to gently tap the lock mechanism with a hammer to loosen it from its position. Be cautious when doing this to avoid causing any damage to the door or surrounding areas.

Once the lock mechanism is loosened, you can proceed to detach it from the door completely. This may involve pulling or twisting the mechanism to release it from the door frame.

Finally, carefully remove the lock mechanism from the door, ensuring that you do not misplace any small components in the process. Take note of the arrangement and orientation of the different parts as this will be helpful during the reassembly process.

Removing the Exterior Door Handle

In this section, we will discuss the process of taking off the outer door handle, which is one of the necessary steps in fixing a door that refuses to lock. A malfunctioning exterior door handle can be a frustrating problem, but with the right approach, it can be resolved effectively.

Firstly, it is vital to locate the exterior door handle on the door. This handle is typically located on the outside of the door and is used to open and close it. Identifying the handle is crucial to start the removal process.

Once identified, carefully inspect the handle for any visible screws or bolts that are securing it to the door. These fasteners may be hidden, so a thorough examination is required. Use a screwdriver or a wrench to loosen and remove the screws or bolts, ensuring that they are kept in a secure place to avoid misplacing them.

After removing the visible fasteners, the next step is to detach the exterior door handle from the door itself. Gently pull the handle away from the door, being cautious not to exert excessive force that could cause damage. If necessary, wiggle the handle while pulling to release it from any remaining attachment points.

Once the exterior door handle is detached, inspect it for any signs of damage or wear. Common issues that can prevent the door from locking properly include broken springs or misalignment. If any damage is found, it may be necessary to replace the handle entirely or fix the damaged parts.

With the exterior door handle successfully removed and assessed, it is now possible to proceed with the necessary repairs to fix the locking issue. Refer to the appropriate resources or seek professional guidance to ensure correct repair procedures.

Remember to exercise caution throughout the process and take necessary safety measures to prevent any accidents or injuries. Keep track of all removed parts and follow a systematic approach to simplify the reassembly process.

In conclusion, the removal of the exterior door handle is a crucial step in repairing a door that won’t lock. By properly identifying and detaching the handle, it becomes possible to address any damage or misalignment, allowing for an effective resolution to the locking issue.

Unscrewing the Lock Cylinder

In this section, we will discuss the process of removing the lock cylinder from your door as part of the repair procedure. It is important to unscrew the lock cylinder properly to fix any issues causing the door to not lock.

To begin, you will need a suitable screwdriver tool to remove the screws that hold the lock cylinder in place. Make sure to use the correct size screwdriver to avoid damaging the screws or the lock cylinder itself.

First, locate the screws on the outer side of the door that secure the lock cylinder. These screws are usually found on the faceplate or escutcheon of the lock. Use the screwdriver to carefully and gently unscrew the screws, turning them counterclockwise.

It is important to note that the number of screws and their placement may vary depending on the door and lock type. Some lock cylinders may have multiple screws holding them in place, while others may have only one or two.

Once all the screws are loose, you can now proceed to unscrew the lock cylinder from the door. Hold onto the outer part of the cylinder with one hand to prevent it from falling out while using the other hand to rotate the cylinder counterclockwise. Apply gentle pressure as you rotate it to unscrew it completely.

Be cautious not to force or twist the lock cylinder too hard, as this may cause damage. If you encounter any resistance, try wiggling the cylinder gently or applying a small amount of lubricant to ease its removal.

After unscrewing the lock cylinder, carefully remove it from the door. You may now proceed with examining the cylinder for any visible issues that may be causing the lock to malfunction. Look for any signs of damage, debris, or misalignment.

If you identify any problems, such as a broken or worn-out component, you may need to replace the entire lock cylinder or specific parts. On the other hand, if there are no apparent issues, cleaning and lubricating the cylinder may be sufficient to resolve the locking problem.

Once you have completed any necessary repairs or maintenance, you can reinstall the lock cylinder by reversing the unscrewing process. Insert the cylinder back into its original position and rotate it clockwise to secure it. Then, reinsert and tighten the screws using the screwdriver.

By unscrewing the lock cylinder properly and addressing any underlying issues, you can effectively repair a door that won’t lock and restore its functionality for greater security and peace of mind.

Taking out the Deadbolt

One important step in the process of repairing a door that is experiencing difficulties with locking is removing the deadbolt. This crucial component of the door’s locking mechanism can sometimes become damaged or worn over time, leading to issues with locking and unlocking the door smoothly and securely.

To begin the process of taking out the deadbolt, it is essential to gather the necessary tools. A screwdriver with the appropriate size and type of head, such as a Phillips or flathead, will typically be required for unscrewing the screws holding the deadbolt in place. Additionally, having a lubricant on hand, such as WD-40, can be useful for loosening any stuck or rusted components.

Before attempting to remove the deadbolt, it is vital to ensure the door is in the unlocked position. To do this, turn the door handle or knob to engage the latch, allowing the door to swing open freely. This will prevent any complications or potential damage from trying to remove the deadbolt while the door is locked.

Once the door is open and the deadbolt is exposed, inspect the area around the deadbolt for any visible screws or fasteners. These are typically located on the interior side of the door, either along the edge or near the handle/knob. Use the screwdriver to carefully remove the screws, taking care not to strip or damage them.

After removing the screws, gently slide the deadbolt out of the door. It may require some wiggling or maneuvering to loosen it from its position, particularly if it has been installed for a long time. Using a lubricant can help facilitate this process by reducing friction and allowing for smoother removal.

Once the deadbolt is successfully removed, examine it for any signs of damage such as rust, bent parts, or excessive wear. Depending on the issues identified, it may be necessary to repair or replace the deadbolt altogether. This will ensure that the door’s locking mechanism functions properly and provides the necessary security.

With the deadbolt taken out, the door is now ready for further repair or maintenance. By carefully following the necessary steps and taking the time to address each issue individually, you can successfully restore your door’s locking functionality.

Repairing and Replacing Parts

In this section, we will discuss the necessary steps to fix and change the various components involved in ensuring a properly functioning lock mechanism on a door. By addressing the different parts associated with the lock, we can diagnose the potential issues and provide possible solutions to restore functionality.

One of the essential elements to examine is the lock cylinder, which is responsible for initiating the locking mechanism. If the lock cylinder is damaged or worn out, it may hinder the smooth operation of the lock. By inspecting and either repairing or replacing the lock cylinder, you can improve its functionality.

Another crucial part to assess is the lock strike plate. This metal plate is attached to the door frame and acts as a receiver for the lock bolt. Over time, the strike plate may become loose or misaligned, leading to difficulties in locking the door. By adjusting or replacing the strike plate, you can ensure that the lock bolt aligns properly and secures the door.

The latch mechanism is another component to consider when troubleshooting a faulty lock. The latch is responsible for keeping the door closed and locked securely. If the latch is not engaging correctly or is jammed, it can prevent the door from locking. By examining and either repairing or replacing the latch, you can enhance the locking capabilities of the door.

Lastly, the door handle or knob should be included in the inspection. The handle operates the lock mechanism and, if damaged or malfunctioning, can prevent the lock from engaging. By repairing or replacing the handle, you can ensure smooth operation and a secure lock.

By systematically evaluating these different parts and addressing any issues found, you can effectively repair and replace the necessary components to restore a door’s locking functionality.

Cleaning and Lubricating the Mechanism

In order to ensure your door’s locking mechanism operates smoothly and efficiently, it is important to clean and lubricate it regularly. By removing dirt, dust, and debris that may have accumulated over time, you can prevent potential issues such as sticking or jamming. Additionally, applying a proper lubricant can help reduce friction and improve the overall functionality of the mechanism.

To begin, gather the necessary tools and materials. You will need a soft cloth or sponge, a mild detergent or cleaning solution, a small brush or toothbrush, and a silicone-based lubricant. It is important to avoid using harsh cleaners or abrasive materials, as these can damage the mechanism.

First, remove any visible dirt or particles from the mechanism using the cloth or sponge. Pay close attention to hard-to-reach areas and crevices where debris may have accumulated. Next, dampen the cloth or sponge with the mild detergent or cleaning solution and gently scrub the surface of the mechanism. Be cautious not to apply excessive force, as this can lead to damage.

Once the mechanism is clean, use the small brush or toothbrush to reach deeper into the mechanism and remove any stubborn dirt or grime. Take care to brush in a gentle, circular motion to avoid causing any damage. Afterward, wipe away any remaining residue with a clean cloth or sponge.

After the cleaning process is complete, it is time to lubricate the mechanism. Shake the silicone-based lubricant well and apply a small amount to the keyhole, latch, and any moving parts or hinges. Be sure to follow the manufacturer’s instructions on the lubricant’s packaging for optimal usage.

Finally, test the door’s locking mechanism to ensure it operates smoothly. If any issues persist, repeat the cleaning and lubricating steps or consider seeking professional assistance. Regular cleaning and lubrication will help extend the lifespan of your door’s locking mechanism and maintain its functionality over time.

Replacing Malfunctioning Components

In this section, we will explore the process of replacing faulty parts in order to address the issue of a door that is unable to lock properly. When encountering a door lock problem, it is often necessary to identify and replace the malfunctioning components. This step is crucial in order to restore the functionality and security of the door.

One common reason for a door not locking is a malfunctioning lock mechanism. This can occur due to various factors such as wear and tear, damage, or improper installation. To resolve this, it is necessary to replace the lock mechanism with a new one. This involves disassembling the faulty mechanism, removing it from the door, and installing the new one in its place. It is important to ensure that the new lock mechanism is compatible with the door and functions properly.

In some cases, the issue may lie with the door’s strike plate. The strike plate is the metal piece attached to the door frame that the lock latch engages with when the door is closed. If the strike plate is misaligned, damaged, or worn out, it can prevent the latch from engaging properly, causing the door to not lock. To address this, the old strike plate needs to be carefully removed and replaced with a new one that matches the door’s lock latch.

Another potential culprit for a door that won’t lock is the door frame itself. If the frame is warped, cracked, or damaged, it can affect the alignment and operation of the door lock. Replacing a damaged door frame involves removing the old frame, ensuring that the new frame is accurately sized and aligned, and securely installing it. This process may require the assistance of a professional for precision and stability.

When dealing with a door that won’t lock, it is important to consider all possible malfunctioning components that could be causing the issue. By identifying and replacing these components, the door can be restored to optimal functionality, ensuring the security and peace of mind for the occupants.

Adjusting the Strike Plate

Alignment and adjustment of the strike plate is a crucial step in resolving issues with a door that doesn’t lock properly. By making necessary adjustments to the strike plate, you can ensure that the door latch engages smoothly and securely.

Here are some steps to adjust the strike plate:

1. Inspect the door latch and strike plate alignment. Check for any visible gaps or misalignment.
2. Use a screwdriver to loosen the screws securing the strike plate. Be careful not to remove them completely.
3. Gradually reposition the strike plate using slight taps or adjustments, either up, down, left, or right, based on the observed misalignment.
4. Test the door lock mechanism by closing the door and attempting to lock it. Pay attention to any dragging or resistance.
5. If the latch still won’t engage smoothly, repeat the previous step, making finer adjustments to the strike plate.
6. Once the latch smoothly engages with the strike plate, securely tighten the screws to hold the strike plate in place.
7. Double-check the functionality of the door lock by opening and closing the door several times.

Proper adjustment of the strike plate can prevent unnecessary wear and tear on the door latch, ensuring enhanced security and peace of mind.

Reassembling the Lock Mechanism

In this section, we will discuss the crucial steps involved in reassembling the lock mechanism of a stubborn door that refuses to lock. Once you have identified and addressed the underlying issue causing the problem, it is important to follow the correct process to put the lock mechanism back together. We will guide you through the necessary steps to ensure a successful reassembly.

1. Aligning the components:

Begin by carefully aligning the different components of the lock mechanism. This might involve fitting the latch, deadbolt, or other parts back into their designated positions. Pay attention to any markings or indicators on each component to ensure proper alignment.

2. Connecting the pieces:

Once the components are in the correct alignment, it is time to connect them together. This can be done by inserting screws, pins, or any other fasteners provided with the lock mechanism. Make sure each connection is secure but avoid overtightening, as it may lead to difficulties in the smooth functioning of the lock.

3. Testing the lock:

After reassembling the lock mechanism, it is crucial to test its functionality. This involves insuring that the latch engages properly with the strike plate and that the deadbolt extends and retracts smoothly. Additionally, test the lock with the door open and closed to ensure it operates correctly in both scenarios.

4. Fine-tuning if necessary:

If you encounter any issues during the testing phase, take note of them and be prepared to make further adjustments. This may involve disassembling and reassembling certain parts to troubleshoot the problem. Keep in mind that sometimes small adjustments can make a big difference in the overall performance of the lock.

Remember, reassembling the lock mechanism requires careful attention to detail and patience. By following these steps, you can ensure that the lock functions smoothly and provides the security you need for your door.

Installing the Deadbolt

In this section, we will discuss the process of installing a deadbolt on your door. Adding a deadbolt to your door can enhance its security by providing an additional lock mechanism. By following these guidelines, you will be able to successfully install a deadbolt on your door without the need for professional assistance.

First, gather all the necessary tools and materials for the installation. Make sure you have a deadbolt kit, a power drill, a hammer, a chisel, a screwdriver, screws, and a tape measure. It’s important to choose a deadbolt kit that fits the thickness of your door and has a finish that matches your door’s hardware.

Next, mark the location where you want to install the deadbolt on your door. Measure the distance from the edge of the door to ensure proper positioning. Use a pencil to mark the center point for the deadbolt on both the edge and face of the door.

Now, using the provided template from the deadbolt kit, align it with the marks you made and tape it securely to the door. This template will guide you in creating the necessary holes for the deadbolt installation.

Using a power drill and the appropriate drill bit, carefully drill a hole through the door at the designated location for the deadbolt. Be sure to drill straight and maintain a steady hand to avoid any damage to the door.

After drilling the hole, remove the template and proceed to chiseling out a recess for the deadbolt strike plate. Use a hammer and chisel to carefully remove the wood within the marked area, creating a pocket that will accommodate the strike plate.

Once the recess is complete, place the deadbolt through the hole on the edge of the door and align it with the strike plate on the frame. Secure the deadbolt in place using the provided screws and a screwdriver.

Finally, test the deadbolt by turning the thumbturn or key to ensure it extends and retracts smoothly. Make any necessary adjustments if needed. Your deadbolt is now properly installed, adding an extra level of security to your door.

Remember to follow the manufacturer’s instructions provided with your specific deadbolt kit for any additional steps or considerations. With patience and careful execution, you can successfully install a deadbolt on your door and improve the safety of your home.

• Tags:
• door
• lock
• strike
• plate
• mechanism
• ensure
• issue
• deadbolt
• repair
• necessary