Repair a Damaged Storm Door - The Ultimate Step-by-Step Guide

With the ever-changing whims of nature, our exterior doors endure an onslaught of fierce wind, pounding rain, and scorching heat. Over time, these elemental forces take their toll, leaving our beloved entryways weathered and worn. However, fear not, for now you hold the key to restoring the former glory of your storm door. This comprehensive how-to article will guide you through the intricate process of rejuvenating your battered portal, enabling you to give it a new lease on life.

Throughout this enlightening journey, we will discover the myriad approaches you can take to resurrecting your storm door’s splendor. From identifying and swiftly addressing issues such as dents and cracks to uncovering the artistry of refinishing and repainting, each step will lead you closer to a revitalized entrance that exudes charm and resilience. Embrace the challenge and prepare to witness the transformation unfold before your very eyes.

As we embark on this remarkable expedition of renewal, it is essential to equip ourselves with the knowledge necessary to navigate the intricacies of door restoration. By familiarizing ourselves with the various materials and tools commonly utilized in this craft, we empower ourselves to effectively combat the damage inflicted by Mother Nature. Throughout this journey, we will explore the versatility of materials like wood, vinyl, and aluminum, delving into the delicate balance between strength and aesthetics. With the careful application of sandpaper, putty, and paint, we will breathe new life into your storm door, reinvigorating its function and enhancing its aesthetic appeal.

Beyond the physical restoration lies the opportunity to infuse your storm door with character and creativity, elevating it to a true work of art. Embark on this transformative adventure with an open mind and a willingness to explore new possibilities. Together, we shall embark on a journey that not only repairs but revitalizes, not only fixes but transforms.

Assess the Damage

When encountering a storm door that has been impacted by extreme weather conditions, it is essential to thoroughly assess the extent of the damage before proceeding with any repairs. By carefully evaluating the condition of the door, you can determine the necessary steps to restore it to its original functionality and appearance.

Begin by conducting a visual inspection of the storm door, paying close attention to any visible signs of damage such as cracks, dents, or broken glass. Take note of the specific areas that require attention, as this will guide the repair process.

Next, check the functionality of the storm door by carefully opening and closing it. Observe whether there are any issues with the hinges, handle, or latch mechanism. It is crucial to identify any problems that may affect the door’s ability to function properly.

Additionally, assess the structural integrity of the door frame. Look for any signs of warping, rotting, or rusting. These issues can compromise the overall stability and security of the storm door.

Consider the overall aesthetic condition of the door as well. Note any scratches, chipped paint, or discoloration that may require attention during the repair process.

By thoroughly assessing the damage to your storm door, you will be able to develop a clear plan for its repair and restoration. This careful evaluation ensures that all necessary steps are taken to address the specific issues and bring the storm door back to its optimal condition.

Identify the Affected Areas

Understanding the extent of damage is crucial when it comes to repairing a storm door. This section will guide you in recognizing the areas that have been negatively affected by the storm, providing you with a comprehensive overview of the necessary repairs.

• Examine the structure of the storm door starting from the frame to the various components such as hinges, handles, and locks.
• Assess the door panels, paying attention to any dents, scratches, or cracks that may have occurred due to the storm.
• Check the weatherstripping for signs of wear or damage, as it plays a crucial role in insulating the door.
• Inspect the glass panels for cracks, chips, or shattered areas caused by the storm’s impact.
• Observe the condition of the screen, ensuring it is intact and free from tears or holes that may have developed because of the storm.
• Take note of any other visible signs of damage or malfunction that may require repair or replacement.

By carefully identifying the affected areas, you’ll be able to plan and prioritize the necessary steps to effectively repair your storm door, ensuring its proper functionality and aesthetic appeal.

Determine the Extent of the Injury

The first step in the process of addressing a storm door that has endured some degree of harm is to assess the seriousness of the damage. By carefully examining the various components of the door, its structure, and the nature of the issues present, you can gain a better understanding of the required repairs.

Begin by inspecting the door’s frame, hinges, and glass panels. Look for any visible signs of cracks, dents, or misalignment. Pay close attention to the condition of the weatherstripping, handle, and latch mechanism as well.

In order to accurately determine the severity of the damage, it is important to test the functionality of the door. Open and close it several times, checking for any sticking or difficulty in movement. Take note of any unusual sounds, such as scraping or grinding, which could indicate underlying problems.

Based on the observations made during the inspection and tests, categorize the damage into one of the following levels: minor, moderate, or severe. This classification will help guide you in determining the necessary steps to take in the repair process.

Gather the Necessary Tools and Materials

Preparing to repair your storm door requires assembling the essential tools and materials. By gathering everything you need beforehand, you can ensure a smooth and efficient repair process.

Below is a table listing the various tools and materials you will need:

Having these tools and materials readily available will enable you to efficiently repair your storm door and achieve optimal results. It is important to gather everything beforehand to avoid interrupting the repair process or having to make multiple trips to the store.

Tools

In order to successfully complete the repair of your storm door, you will need a variety of tools. These tools will assist you in addressing the issues and restoring the functionality and appearance of your door.

• A screwdriver is an essential tool for removing and installing screws, hinges, and other fasteners. It allows you to disassemble and reassemble the door with ease.
• A hammer is necessary for gentle tapping or more forceful strikes when realigning or adjusting certain components of the door.
• Pliers are useful for gripping and twisting different types of hardware, such as adjusting tension springs or tightening loose screws.
• A putty knife is helpful for scraping away old paint or caulk, allowing for a clean surface to work with during repairs.
• Safety goggles and gloves are crucial to protect your eyes and hands from any potential injuries or accidents during the repair process.
• A tape measure will come in handy for taking accurate measurements while replacing damaged parts or installing new components.
• A level will ensure that your door is properly aligned and balanced, preventing any further issues with its functionality.
• Sanding and abrasive tools, such as sandpaper or a sanding block, are useful for smoothing out rough edges or surfaces before applying new finishes or paint.
• A caulking gun is necessary for applying caulk to seal any gaps or cracks in the door, ensuring that it is weatherproof and energy-efficient.

By having these tools readily available, you will be well-equipped to tackle the various steps involved in the repair process, allowing you to restore your storm door to its optimal condition.

Materials

In order to successfully complete the task of restoring your weather-beaten entryway, a selection of essential materials is required. These items will assist in the rejuvenation process, allowing you to bring new life to your damaged storm door without the need for professional assistance.

Below is a table containing the necessary materials for this project:

It is recommended to gather these materials before starting the repair process, ensuring you have all the necessary tools at your disposal for a seamless restoration.

Remove the Worn-out Components

When tackling the task of fixing a damaged storm door, one of the crucial steps is to eliminate the parts that have been negatively affected and are no longer functioning properly. This process involves carefully disassembling the door and taking out the worn-out components, making space for new replacements or repairs.

Begin by thoroughly inspecting the storm door for any visible signs of damage or wear, such as cracks, dents, or broken pieces. These parts could include the frame, hinges, latch, screen, or glass panels. Once identified, they need to be taken out to pave the way for the repair or replacement process.

Before removing each damaged component, it is essential to ensure you have the necessary tools at hand, such as a screwdriver, pliers, or a pry bar, depending on the specific part. Carefully refer to any documentation or guidelines provided by the manufacturer to ensure a safe and proper removal process.

As you disassemble the storm door, handle the damaged parts with care to prevent any further harm or injuries. Keep in mind that some components may be attached with screws, while others may require gentle prying or unsnapping. Take your time and proceed methodically to avoid causing additional damage.

By diligently removing the damaged parts, you create a clean slate for the upcoming repair steps of the storm door. With the old components out of the way, you are prepared to move forward in restoring and improving the functionality and aesthetics of your storm door.

Remove the Broken Glass

One of the crucial steps in repairing a damaged storm door is removing the broken glass. This process involves carefully removing the shattered pieces of glass from the door panel to ensure a safe and clean repair.

To begin, gather the necessary tools and materials for the glass removal process. You will need safety gloves, protective eyewear, a putty knife or a glass removal tool, and a garbage bag or container to dispose of the broken glass.

First, put on your safety gloves and protective eyewear to protect yourself from any sharp edges or flying glass fragments. Then, carefully inspect the door panel to identify the areas where the glass is broken or cracked.

Using a putty knife or a glass removal tool, gently pry away any remaining intact glass surrounding the broken sections. Be cautious not to apply too much pressure, as this can cause further damage to the door panel.

Once the intact glass has been removed, place the broken glass shards into a garbage bag or container. Make sure to handle the glass carefully to avoid any injuries or cuts. Dispose of the glass properly according to your local regulations.

After removing the broken glass, inspect the door panel for any remaining glass fragments or debris. Use the putty knife or glass removal tool to carefully scrape away any remaining adhesive or glass residue from the panel.

It is crucial to clean the door panel thoroughly before proceeding with any repairs. Wipe the panel clean using a damp cloth or mild cleaning solution, ensuring that all glass particles and residue are removed. Allow the door panel to dry completely before moving on to the next step.

Take Out Any Bent or Broken Metal Frames

Repairing a storm door requires careful attention to detail and a step-by-step approach. One crucial step in the repair process is to remove any bent or broken metal frames. These frames provide structural support to the door and are essential for its proper functioning and durability.

To begin, carefully inspect the storm door for any visible signs of bent or broken metal frames. Look for dents, cracks, or misalignment in the frames. It’s crucial to identify all damaged areas before proceeding with the removal process.

Once you have identified the problem areas, gather the necessary tools for the removal process. You may need a screwdriver, pliers, or a pry bar, depending on the type and severity of the damage. It’s essential to ensure you have the appropriate tools on hand to avoid further damage or injury.

Begin by removing any screws or nails attaching the bent or broken metal frames to the door. Carefully unscrew or pry them out, being cautious not to strip the screws or damage the surrounding area. If the frames are welded or permanently attached, consult a professional for assistance with their removal.

After removing any fasteners, gently pull or pry the damaged frames away from the door. Take your time and apply even pressure to avoid additional damage to the surrounding area. If the frames are stubborn or tightly secured, consider applying a lubricant to loosen them before attempting to remove them.

Once the bent or broken frames are successfully removed, carefully inspect the door and surrounding area for any remaining debris or damage. Clean the area thoroughly, removing any loose screws, nails, or metal fragments to ensure a clean and safe working environment.

Now that the damaged frames are out, you can assess the extent of the repair needed. Depending on the severity of the damage, you may need to replace the frames entirely or repair them by straightening out bent sections or reinforcing weak areas. Consult a professional if you are unsure of the best repair approach.

Remember, taking out any bent or broken metal frames is a crucial step in repairing a storm door. By carefully inspecting, removing, and assessing the damage, you can ensure a successful repair process and restore the functionality and appearance of your storm door.

Repair or Replace the Frame

When it comes to restoring a damaged storm door, one crucial aspect to consider is whether to repair or replace the frame. This decision is pivotal as it directly impacts the overall functionality and durability of the door.

Repairing the frame of a storm door involves fixing any visible damage, reinforcing weak areas, and ensuring proper alignment. This can be achieved by using suitable repair techniques such as filling cracks, patching holes, or reinforcing with metal brackets. By carefully inspecting the frame and addressing specific issues, it is possible to restore its strength and stability.

On the other hand, in some cases, the damage to the frame may be extensive or irreparable. If the frame is severely warped, rotted, or damaged beyond repair, it may be necessary to opt for a replacement. This offers the opportunity to install a brand new frame that matches the style and dimensions of the existing storm door.

When deciding whether to repair or replace the frame, it is essential to consider factors such as the age and condition of the door, availability of replacement parts, budget, and personal preferences. Conducting a comprehensive assessment of the extent of the damage and consulting with professionals can help make a well-informed decision.

• Inspect the frame thoroughly to assess the extent of the damage.
• Consider the availability and cost of replacement parts.
• Weigh the cost of repairs versus the cost of a new frame.
• Evaluate the overall condition and age of the storm door.
• Consult with professionals or seek expert advice when in doubt.

By carefully evaluating the options and considering the factors mentioned above, it is possible to determine whether repairing or replacing the frame is the best course of action for restoring a damaged storm door. Whether choosing to repair or replace, ensure that the chosen solution aligns with personal preferences, functionality requirements, and budget constraints.

Repairing a Cracked Frame

In this section, we will discuss the necessary steps to fix a damaged frame on your storm door. A cracked frame can compromise the structural integrity of the door and impact its functionality. By following these instructions, you will be able to restore the frame’s stability and ensure that your storm door remains secure and functional for the long haul.

• Inspect the crack: Start by carefully examining the cracked frame to determine the extent of the damage. Look for any loose or splintered pieces that may require repair or replacement.
• Clean and prepare the area: Before proceeding with any repairs, it is important to clean the cracked frame thoroughly. Remove any dirt, debris, or old paint that may hinder the repair process.
• Apply epoxy adhesive: Using a high-quality epoxy adhesive, carefully apply a generous amount to the cracked area of the frame. Be sure to follow the manufacturer’s instructions for the specific adhesive being used.
• Reinforce with dowels or screws: To provide additional strength and stability, consider reinforcing the cracked frame with dowels or screws. This will help prevent further cracking and strengthen the overall structure.
• Sand and paint: Once the adhesive has cured, use sandpaper to smooth out any rough edges or excess adhesive. Then, apply a fresh coat of paint that matches the color of your storm door to give the repaired frame a seamless appearance.

Remember, repairing a cracked frame is crucial to maintaining the functionality and longevity of your storm door. By following these steps and taking the necessary precautions, you can successfully repair the damage and ensure that your storm door remains in optimal condition.

Replacing a Severely Damaged Frame

Addressing a severely damaged frame is a crucial step in restoring the functionality and appearance of your storm door. When faced with extensive damage, it is essential to replace the frame to ensure proper alignment, stability, and security.

To begin the process of replacing a severely damaged frame, you will need a few essential tools and materials, including a screwdriver, measuring tape, replacement frame, and screws. Start by carefully removing the existing frame, taking care not to damage any surrounding areas. Once the old frame is removed, use the measuring tape to accurately determine the dimensions of the replacement frame.

Next, align the replacement frame with the door opening, ensuring that it fits securely and snugly. Use the screwdriver to attach the frame to the door frame, securely fastening it in place. It is crucial to maintain proper alignment throughout this process to ensure that the storm door functions correctly once the repair is complete.

After securing the replacement frame, inspect the door for any additional damage that may have occurred during this process. Pay close attention to areas that may have been weakened or compromised. If necessary, reinforce any weak points or repair any minor damages to ensure the door’s durability and longevity.

Once the frame replacement is complete, take the time to clean and polish the storm door’s exterior and interior surfaces. Remove any debris, dirt, or grime that may have accumulated throughout the repair process, as this will help to improve the door’s overall appearance and functionality.

In summary, replacing a severely damaged frame is a critical aspect of repairing a storm door. By following the step-by-step process outlined above, you can successfully replace the frame, ensuring proper alignment and stability for your door. Remember to measure accurately, align the replacement frame securely, and address any additional damages that may have occurred during the repair process.

Replace the Glass

In this section, we will discuss the necessary steps to replace the glass in your storm door. If the glass in your door has been damaged or broken, it is important to address this issue promptly to ensure the security and functionality of your door.

Before beginning the replacement process, gather the necessary tools and materials. You will need safety gloves, protective eyewear, a putty knife or scraper, a glazing compound, glazier points, a glass cutter, and a replacement glass panel.

Start by carefully removing any remaining pieces of glass from the door frame using the putty knife or scraper. Be cautious to avoid injury from sharp edges. Once the glass is completely removed, clean the frame and ensure it is free from any debris or old adhesive.

• Put on your safety gloves and protective eyewear.
• Measure the dimensions of your door frame to obtain the correct size for the replacement glass panel.
• Using a glass cutter, score along the measured lines to create an even break line.
• Gently tap along the scored line to break the glass along the desired size.
• With the broken glass removed, apply a thin layer of glazing compound to the inner edges of the door frame.
• Place the replacement glass panel onto the glazing compound, ensuring it is centered and level within the frame.
• Secure the glass panel in place by inserting glazier points evenly around the frame.
• Press the glazier points firmly into the frame using a putty knife.
• Apply additional glazing compound to the outer edges of the frame to create a seamless seal between the glass and the frame.
• Allow the glazing compound to dry completely before testing the door’s functionality.

By following these steps, you can successfully replace the glass in your storm door, restoring its appearance and functionality. Remember to exercise caution and use proper protective gear throughout the process.

Measuring and Cutting the Glass

In this section, we will discuss the essential steps involved in accurately measuring and cutting the glass for your storm door repair project. Proper measurement and precise cutting are crucial for ensuring a secure and seamless fit of the glass panel.

Firstly, it is important to take precise measurements of the existing glass panel that needs replacement. Carefully measure the height and width of the damaged glass panel using a tape measure or ruler. Ensure you record the measurements accurately to avoid any miscalculations.

Once you have obtained the measurements, it is time to cut the new glass to the correct size. Start by marking the measurements on the glass using a non-permanent marker or a glass cutter. Make sure to align the markings accurately to ensure a perfect fit.

Next, using a glass cutter, score along the marked lines with gentle pressure. It is crucial to maintain a steady hand and even pressure to achieve clean and accurate cuts. Be cautious not to apply excessive force that may cause the glass to break or crack.

After scoring, carefully break the glass along the scored lines. Placing one hand underneath the scored area, apply gentle pressure with your other hand to snap the glass cleanly along the marked lines. Be cautious and wear protective gloves to avoid any potential injuries.

Once the glass is cut, inspect the edges for any roughness or sharp edges. If necessary, use a fine-grit sandpaper or a glass file to smooth out any rough edges and make them safe to handle.

After completing the measurement and cutting process, you are now ready to proceed with the installation of the newly cut glass panel into the storm door, following the appropriate steps for your particular door model.

Installing the New Glass

Replacing the damaged glass on your storm door is a crucial step in restoring its functionality and enhancing its appearance. With careful attention to detail and following these instructions, you can successfully install the new glass without any hassle.

Here are the necessary steps to guide you through the process:

1. Begin by gathering all the tools and materials needed for the installation. This may include a measuring tape, safety gloves, a screwdriver, and the replacement glass.
2. Ensure the storm door is in a secure and stable position before starting. This will prevent any accidents or damage during the glass installation.
3. Carefully remove any screws or fasteners that hold the broken glass in place. Use caution while handling the broken pieces to avoid injury.
4. Take precise measurements of the opening to determine the correct size for the new glass. Remember to measure both the width and height to ensure an accurate fit.
5. Once you have the measurements, visit a local hardware store or glass supplier to purchase the appropriate replacement glass. Make sure to choose a glass that matches the style and thickness of the original.
6. With the new glass in hand, carefully place it into the empty frame, ensuring it fits snugly. Use the screwdriver to reattach any screws or fasteners, securing the glass in place.
7. Double-check the alignment and stability of the new glass before proceeding. Make any necessary adjustments to ensure it sits properly in the frame.
8. Finally, clean the glass thoroughly using a non-abrasive cleaner and a lint-free cloth. This will give your storm door a polished and clear appearance, enhancing its overall aesthetic.

By following these steps, you can expertly install the new glass on your storm door, restoring its functionality and improving the overall look of your home. Remember to prioritize safety during the process and take your time to ensure a seamless installation.

Fix or Replace the Handle and Lock

Fixing or replacing the handle and lock of a storm door is an essential step in restoring its functionality and security. The handle and lock are crucial elements that enable proper operation and ensure the door remains closed and locked when needed. This section will guide you through the process of inspecting, repairing, or replacing the handle and lock to restore the door’s functionality and enhance its overall performance.

Begin by carefully inspecting the handle and lock of your storm door. Look for any signs of physical damage, such as cracks, dents, or loose screws. Additionally, check if the handle and lock mechanism are functioning properly. If you notice any issues, proceed to identify the specific problem affecting their performance.

Once you have identified the issues, determine if they can be repaired or if it is necessary to replace any components of the handle and lock. Common problems include loose or broken screws, misaligned latch plates, or worn-out internal mechanisms. Depending on the severity of the damage, you may need to purchase replacement parts or an entirely new handle and lock set.

If repair is possible, carefully follow the manufacturer’s instructions or consult online resources to fix the damaged components. This may involve tightening or replacing screws, realigning latch plates, or lubricating internal mechanisms. However, if a replacement is required, ensure that you choose a handle and lock set that matches the specifications and design of your storm door.

Lastly, install the new handle and lock according to the manufacturer’s instructions. Pay close attention to proper alignment and secure attachment to guarantee smooth operation. Test the handle and lock to ensure they are working effectively and providing the necessary security for your storm door.

By addressing any issues with the handle and lock, you can restore the functionality of your storm door and enhance its overall appearance and security. Taking the time to inspect, repair, or replace these components will ensure a durable and reliable door that can withstand various weather conditions while providing peace of mind.

Repairing a Loose or Broken Handle

If you find yourself facing a handle on your storm door that is either loose or broken, don’t fret! In this section, we will walk you through the process of fixing this issue, ensuring that your storm door regains its functionality and aesthetic appeal.

Firstly, it is important to assess the severity of the problem. If the handle is merely loose, you may be able to tighten the screws or bolts that hold it in place. Using a screwdriver or wrench, carefully tighten each fastener until the handle feels secure. Be cautious not to overtighten as this could cause damage to the handle or door frame.

If, however, the handle is broken and cannot be salvaged, you will need to replace it. Begin by locating the screws or bolts that hold the handle in place. Using a screwdriver or wrench, remove these fasteners and detach the broken handle from the door. Ensure that you remember the placement and orientation of any washers or additional pieces that may be present.

With the broken handle removed, it is time to install the replacement. Take the new handle, align it with the existing holes in the door, and secure it in place using the appropriate screws or bolts. Make sure that the handle is flush against the door and that all fasteners are tightened adequately.

Once the new handle is securely attached, test its functionality by opening and closing the storm door. Ensure that the handle operates smoothly and that there is no excessive play or movement. If everything is in order, you have successfully repaired the loose or broken handle on your storm door!

Remember, a well-maintained and functional storm door not only enhances the security of your home but also adds to its overall curb appeal. By following these steps and addressing the issue promptly, you can enjoy the benefits of a fully operational storm door for years to come.

Replacing a Faulty Lock

In this section, we will discuss the process of replacing a malfunctioning lock on a storm door. When the lock on your door is no longer functioning properly, it is essential to address the issue promptly to ensure the security and functionality of your storm door.

To begin, identify the specific problems with your lock, such as difficulty turning the key, a loose or damaged handle, or a lock that doesn’t engage properly. Once you have identified the issue, gather the necessary tools, including a screwdriver, pliers, and a replacement lock set.

First, remove the screws securing the old lock set in place using a screwdriver. Carefully detach the lockset from the door, ensuring not to damage any surrounding components. If necessary, use pliers to loosen any stubborn screws or connections.

Once the old lock set has been removed, prepare the door for the installation of the new lock. Clean the area thoroughly, removing any debris or remnants from the previous lock. Pay close attention to the alignment of the holes and ensure they are clear of any obstacles.

Now, take the new lock set and carefully align it with the holes on the door. Insert the screws or other fasteners provided with the lock set, ensuring they are secure but not over-tightened to avoid damaging the door. Make sure the lock operates smoothly and without any obstructions.

If necessary, make any adjustments or tighten screws as needed to ensure the lock is functioning properly. Test the lock by turning the key and ensuring it engages and disengages smoothly. Double-check that the handle is secure and does not wobble or feel loose.

In conclusion, replacing a faulty lock on your storm door is a relatively straightforward process that can be done with the right tools and careful attention to detail. By following these steps, you can restore the functionality and security of your door, providing peace of mind for you and your household.

Sand and Repaint the Door

Refresh the appearance of your storm door by gently sanding the surface and applying a fresh coat of paint. This step will give your door a new lease on life and protect it from further damage caused by weather and wear.

To begin, remove any hardware or accessories from the door, such as handles, hinges, or kickplates. Use a screwdriver or appropriate tool to carefully detach these items, ensuring you do not damage the door or the hardware itself.

Next, use a medium-grit sandpaper or sanding block to gently sand the entire surface of the door. This step helps to remove any loose or peeling paint, smooth out any rough patches, and create a clean, even surface for the new paint to adhere to.

After sanding, use a damp cloth or sponge to wipe away any dust or debris from the door. This will ensure that the paint adheres properly and creates a smooth finish. Allow the door to dry completely before moving on to the next step.

Now, it’s time to apply the new paint. Choose a high-quality exterior paint that is suitable for your door material and the climate in your area. Using a paintbrush or roller, apply thin, even coats of paint, working from top to bottom and following the direction of the door’s grain. Allow each coat to dry completely before applying the next one, as this will help achieve a professional-looking finish.

Once the final coat of paint is dry, carefully reattach any hardware or accessories that were removed earlier. Take your time to align and secure each item properly, ensuring that the door operates smoothly and functions as intended.

In conclusion, sanding and repainting your storm door is an effective way to revitalize its appearance and prolong its lifespan. By following these steps, you can transform your damaged door into a beautiful and functional feature of your home.

• Tags:
• door
• storm
• glass
• damage
• frame
• repair
• ensure
• handle
• remove
• carefully