Troubleshooting and Fixing a Non-Functioning Washing Machine

When faced with the disheartening situation of a washing machine that refuses to commence its cleaning cycle, it is crucial to embark on the troubleshooting process in a systematic and logical manner. A non-starting washing appliance can be a frustrating and perplexing experience, leaving individuals without clean laundry and a sense of helplessness. However, by following simple steps and employing basic problem-solving techniques, it is possible to rectify this matter and restore the washer to its former efficient state.

Identification

In order to accurately identify and address the underlying issue preventing the washing machine from starting, it is imperative to conduct a comprehensive examination and analysis of potential causes. Common culprits can range from power supply problems to faulty components such as timers, switches, or even the motor itself. By conducting a thorough inspection, one can narrow down the source of the problem and determine the appropriate course of action.

Basic Troubleshooting

Before embarking on any repair efforts, it is recommended to perform some basic troubleshooting steps to rule out any simple and easily rectifiable causes. These include ensuring that the washing machine is properly connected to a functional power outlet, checking and resetting any tripped circuit breakers, and confirming that the power cord is not damaged. It is also advisable to inspect the water supply and drainage connections, as any irregularities in these areas can also hinder the machine’s functionality.

Stay tuned for our upcoming article on the specific steps to undertake in order to identify common issues and conduct the necessary repairs to tackle a non-starting washing machine. Armed with the proper knowledge and guidance, any homeowner can resolve this frustrating situation and have their laundry routine back on track in no time.

Power Supply Issues

When encountering troubles with your washing machine not starting, one of the potential culprits to consider is power supply issues. These can arise from a variety of issues with the electrical system that powers your appliance.

Firstly, it is important to check if the washing machine is properly plugged in. Ensure that the power cord is securely connected to both the machine and the wall outlet. Additionally, inspect the power outlet to ensure it is functioning correctly by testing with a different electrical device.

If the power cord and outlet are in good condition, the next step is to verify the circuit breaker. A blown fuse or tripped circuit breaker can disrupt the power supply to the washing machine. Locate the electrical panel in your home and check if any of the circuit breakers are switched off or if any fuses have blown. If so, reset the circuit breaker or replace the fuse, depending on the type of electrical system in your home.

Another potential cause of power supply issues is a faulty power cord. Over time, the power cord can become worn or damaged, leading to a loss of electrical connection. Inspect the power cord for any visible signs of damage such as frayed wires or exposed insulation. If any issues are detected, it may be necessary to replace the power cord to restore the proper power supply to the washing machine.

Lastly, power supply issues can also arise due to problems with the internal components of the washing machine. Faulty switches, malfunctioning control boards, or damaged wiring can all disrupt the power flow and prevent the appliance from starting. In such cases, it is recommended to contact a professional technician who can diagnose and repair the specific issue.

By addressing power supply issues, you can increase the chances of resolving the problem with your washing machine that refuses to start. Checking the power cord, outlet, circuit breaker, and internal components can help identify and rectify the root cause, allowing you to get your washing machine up and running again.

Check the Power Outlet

Before diving into troubleshooting and repairs, it’s important to start with the basics. One common issue that can prevent a washing machine from starting is a problem with the power outlet. Ensuring that the power outlet is functioning properly is an essential first step in troubleshooting this issue.

Begin by checking if the power outlet is receiving power. You can do this by plugging in a different electronic device, such as a lamp or a phone charger, to see if it works. If the device powers on, then the outlet is likely not the problem. However, if the device does not work, then there may be an issue with the outlet itself.

If you suspect a problem with the outlet, you can try resetting it by turning off the corresponding circuit breaker in your electrical panel and then turning it back on. This can sometimes resolve minor electrical issues with the outlet.

It’s also a good idea to visually inspect the power outlet for any physical damage or loose connections. If you notice any loose wires or visible signs of damage, it is advisable to contact a qualified electrician to address the issue. Handling electrical repairs without proper knowledge and training can be dangerous.

In some cases, the power outlet may be functioning perfectly fine, but the washing machine may still not start. In such situations, it is recommended to proceed with further troubleshooting steps to identify and resolve the underlying cause.

Inspect the Power Cord

One of the first steps you should take when troubleshooting a washing machine that is not starting is to inspect the power cord. The power cord is responsible for delivering electricity to the appliance, and any issues with it can prevent the machine from starting. It is important to carefully inspect the power cord for any visible signs of damage, such as frayed or exposed wires. Additionally, check for any loose connections at both ends of the power cord, ensuring that it is securely plugged into the wall socket and the washing machine itself.

If you notice any damage or loose connections, it is essential to replace the power cord to prevent any potential hazards or further malfunctions. Consider consulting the manufacturer’s instructions or seeking professional assistance when replacing the power cord to ensure proper installation.

In some cases, the power cord may be in good condition, but the issue lies with the power outlet. Therefore, it is also advisable to check the power outlet by plugging in a different appliance to determine if it is functioning correctly. If the alternate appliance works fine, then the problem can be attributed to the washing machine itself, and further troubleshooting steps will be required.

Remember, safety is paramount when dealing with electrical components. Always ensure that the power to the washing machine is disconnected before inspecting the power cord or making any repairs. If you are uncertain or uncomfortable working with electrical connections, it is best to seek professional assistance to avoid any potential harm or damage.

Test the Power Button

One crucial component of troubleshooting a non-starting washing machine is to test the power button. By performing a simple examination and evaluation of the power button, you can determine if it is functioning properly or if it is the cause of the issue. This section will guide you through the process of testing the power button to identify any potential problems.

Start by carefully inspecting the power button for any visible physical damage, such as cracks, loose connections, or worn-out buttons. Additionally, check if the button feels loose or unresponsive when pressed. These observations can provide valuable initial clues about the condition of the power button.

To further assess the functionality of the power button, use a multimeter or a voltage tester. Begin by unplugging the washing machine from the power outlet to ensure your safety. Set the multimeter or voltage tester to the appropriate settings for measuring continuity or voltage.

Next, locate the terminals or wires connected to the power button. Depending on the specific washing machine model, these terminals may be directly accessible on the button or require partial disassembly of the control panel. Carefully connect the multimeter probes to the terminals or wires, ensuring a secure and proper connection.

Once the connections are established, press the power button while observing the multimeter or voltage tester readings. If the power button is working correctly, the multimeter should display continuity or voltage readings. In contrast, a faulty power button may show no change in readings or inconsistent results.

If the power button fails the continuity or voltage tests, it is likely defective and needs to be replaced. Consult the washing machine’s user manual or contact the manufacturer for guidance on obtaining a suitable replacement power button. However, if the power button passes the tests, the issue may lie elsewhere in the washing machine’s electrical system, requiring further troubleshooting.

In conclusion, testing the power button is an essential step in troubleshooting a non-starting washing machine. By carefully examining it for physical damage and using a multimeter or voltage tester to assess its functionality, you can identify if the power button is the root cause of the problem. This initial evaluation serves as a starting point in the overall repair process, allowing you to move forward with confidence in resolving the issue effectively.

Door/Lid Switch Problems

Problems with the door or lid switch can prevent your washing machine from starting or functioning properly. This crucial component ensures that the door or lid is securely closed before the machine can start its cycle. If there are issues with the door/lid switch, it can lead to a variety of problems, including the machine not starting at all or abruptly stopping during a cycle.

One common issue is a faulty or broken switch mechanism. This can occur due to wear and tear over time or from physical damage. If the switch is damaged or not functioning correctly, it may not detect when the door or lid is closed, preventing the machine from starting or continuing its cycle.

Another problem that can occur with the door/lid switch is a misalignment. If the switch becomes misaligned, it may not be able to detect when the door or lid is closed, leading to the same issues as a faulty switch. Misalignment can happen due to improper use or excessive force when closing the door or lid.

In some cases, debris or dirt can get trapped in the switch mechanism, interfering with its proper functioning. This can prevent the switch from detecting the closed position, causing the washing machine to not start or stop mid-cycle. Regular cleaning and maintenance of the switch can help prevent this issue.

If you’re experiencing problems with your washing machine not starting or stopping unexpectedly, it is worth checking the door/lid switch as one of the potential causes. Inspecting the switch for damage, misalignment, or debris and ensuring it is functioning correctly can help resolve the issue and get your washing machine back up and running smoothly.

Check the Door/Lid Switch

The door/lid switch is an essential component of a washing machine that ensures that the door or lid is securely closed before the machine can start its cycle. If the switch is faulty or not functioning properly, it can prevent the washing machine from starting at all. This section will guide you through the process of checking the door/lid switch and troubleshooting any potential issues.

Firstly, visually inspect the door/lid switch to ensure that it is not visibly damaged or loose. If you notice any cracks, breaks, or loose connections, it may be the cause of the problem. In such cases, you will need to replace the switch with a new one.

If the switch appears to be in good condition, the next step is to perform a continuity test with a multimeter. Start by disconnecting the washing machine from the power source to ensure safety. Then, locate the door/lid switch, which is typically positioned near the door or lid lock area.

Using the multimeter, set it to the continuity or ohms setting. Connect one probe to each terminal of the switch and press the switch down as if the door or lid were closed. The multimeter should display a reading of zero ohms or continuity, indicating that the switch is functioning correctly.

If the multimeter does not display a reading or shows infinite resistance, it signifies that the door/lid switch is faulty and needs to be replaced. Before replacing the switch, double-check all connections and make sure they are secure. If the connections are secure and the switch still does not function properly, it’s time to purchase a new switch.

Replacing the door/lid switch involves disconnecting the existing wires and removing the faulty switch. Take note of the wire connections or take a picture before disconnecting to ensure you can correctly reconnect the new switch. Install the replacement switch by connecting the wires to the corresponding terminals and securing it in place according to the manufacturer’s instructions.

In conclusion, a malfunctioning door/lid switch can prevent your washing machine from starting. By visually inspecting the switch for any visible damage and performing a continuity test, you can identify if the switch is faulty and needs replacing. Follow the steps outlined above to troubleshoot and repair the door/lid switch, enabling your washing machine to function properly once again.

Replace the Door/Lid Switch

One possible solution to address a washing machine that is not starting is to replace the door or lid switch. This switch is an integral part of the machine’s safety mechanism and ensures that the door or lid is securely closed before the cycle can begin.

If the door or lid switch is malfunctioning, the machine may not receive the signal that it is closed and therefore will not start. To determine if the switch is the cause of the problem, you can perform a few simple tests.

• First, unplug the machine and locate the switch, which is usually located near the top or side of the door or lid opening.
• Inspect the switch for any physical damage or signs of wear and tear. If you notice any damage, it is likely that the switch needs to be replaced.
• Next, use a multimeter to check the continuity of the switch. Set the multimeter to the continuity or resistance setting and touch the probes to the terminals of the switch. If there is no continuity, the switch is faulty and should be replaced.
• If the switch appears to be in good condition and has continuity, you can also try cleaning the contacts with a cotton swab and some electrical contact cleaner. Sometimes, dirt or debris can prevent the switch from functioning properly.

If after testing and inspecting the switch, you determine that it needs to be replaced, you can easily find a replacement switch online or at a hardware store. Make sure to match the specifications of the old switch to ensure compatibility.

Once you have the replacement switch, you can begin the installation process. Start by unplugging the machine and disconnecting any power supply. Then, remove the old switch by disconnecting the wires and unscrewing it from the machine. Install the new switch in the reverse order, making sure to securely connect the wires and tighten the screws.

After replacing the door or lid switch, plug the machine back in and test if it starts properly. If the machine still does not start, you may need to troubleshoot further or seek professional assistance.

Control Board Malfunction

When your washing machine refuses to begin its cleaning cycle, it may be due to a malfunctioning control board. The control board serves as the brains of the operation, coordinating the various components and functions necessary for proper operation. Just like any electronic device, the control board can develop faults over time, resulting in the failure of the washing machine to start. In this section, we will explore the common signs of control board malfunction and the steps you can take to troubleshoot and potentially repair the issue.

Inspect the Control Board

Examine the control board of your washing machine to identify any possible issues that may be preventing it from starting. The control board acts as the brain of the appliance, responsible for initiating and coordinating the various functions necessary for the machine to operate. By inspecting the control board, you can assess if there are any visible signs of damage or malfunction that may explain the starting issue.

Start by visually examining the control board for any obvious signs of physical damage, such as burnt or discolored spots, loose or corroded connections, or damaged components. These visual cues could indicate a faulty control board that requires replacement. Additionally, check for any loose or disconnected wiring that may affect the proper functioning of the control board.

Using a multimeter, you can perform further diagnostic tests on the control board. Set the multimeter to the resistance mode and carefully measure the resistance across various terminals and connections on the board. Compare these readings to the manufacturer’s specifications to determine if there are any discrepancies that may indicate a faulty control board.

In some cases, electronic components on the control board may fail over time due to wear and tear. If you have experience with electronics, you may consider removing the control board from the washing machine and visually inspecting the components for any signs of damage, such as bulging capacitors or blown fuses. Keep in mind that working with electrical components can be dangerous, so if you are not confident in your skills, it is best to consult a professional technician.

If you are unable to identify any visible issues or determine a faulty control board, it may be necessary to consult the washing machine’s user manual or contact the manufacturer’s customer support for further assistance. They may be able to provide specific troubleshooting steps or recommend a qualified technician to inspect and repair the control board.

Test the Control Board

Ensure the functionality of the control board by performing a series of diagnostic steps. The control board is a vital component in the washing machine that regulates and coordinates various operations. If the washing machine fails to start, it could indicate a malfunction or damage to the control board.

Step 1: Power Supply Test

Check if the washing machine is properly connected to a functioning power source. Verify that the power cord is securely plugged into an outlet and there are no loose connections. Test the outlet with another appliance to confirm it is operational. Make sure there are no tripped breakers or blown fuses.

Step 2: Control Board Fuse Check

Inspect the control board for any blown fuses. Locate the fuse compartment on the control board and carefully remove the fuse cover. Visually examine the fuses for signs of damage, such as a burnt or broken filament. Replace any blown fuses with the appropriate rating to avoid electrical issues.

Step 3: Control Board Capacitor Test

Check the capacitors on the control board for any signs of bulging or leakage. Faulty capacitors can cause issues with the functioning of the control board. If you notice any damaged capacitors, consult a professional for replacement, as handling capacitors can be hazardous.

Step 4: Control Board Connections

Inspect the connections on the control board for any loose or disconnected wires. Ensure that all connections are secure and free from corrosion or debris. If you find any faulty connections, carefully reconnect them and clean any corrosion or dirt using a soft brush or cloth.

Step 5: Control Board Testing Equipment

Use a multimeter or a control board testing tool to check the functionality of the board. Follow the manufacturer’s instructions for using the equipment and measure the voltage and resistance readings. Compare the readings with the specifications provided by the manufacturer to identify any abnormalities.

Note: Testing and repairing the control board should be done with caution. If you are unsure or uncomfortable with handling electrical components, it is recommended to seek professional assistance.

Replace the Control Board

When faced with a malfunctioning washing machine, one possible issue could be a faulty control board. The control board serves as the brain of the machine, controlling various functions and cycles. If the control board is not functioning properly, it can prevent the washing machine from starting or cause it to exhibit erratic behavior.

To determine if the control board is the culprit, it is important to conduct a thorough troubleshooting process. This involves checking other potential causes, such as power supply issues or faulty door latches. Once these have been ruled out, replacing the control board may be the next logical step.

To replace the control board, you will need to first disconnect the washing machine from the power source. This is important for safety reasons and to prevent any potential damage to the electrical components. You will then need to locate the control board, which is typically housed behind the control panel or inside the machine’s main cabinet.

Once the control board has been located, you will need to carefully disconnect any wires or connectors that are attached to it. It is important to take note of their placement or take pictures for reference, as this will help ensure proper reinstallation of the new control board.

After removing the old control board, you can then proceed to install the new one. Make sure to align the connectors properly and securely fasten them in place. Double-check that all connections are secure before reattaching the control panel or closing the machine’s cabinet.

Once the new control board is in place, you can reconnect the washing machine to the power source and test it to see if the issue has been resolved. If the machine now starts and functions as expected, then the replacement of the control board was successful.

Replacing a control board may require some technical knowledge and skills. If you are unsure or uncomfortable with performing this task yourself, it is recommended to seek the assistance of a professional technician or contact the manufacturer for further guidance.

Motor Issues

When a washing machine refuses to start, it can be frustrating and inconvenient. One of the common causes for this problem is motor issues. The motor is a crucial component that drives the entire washing machine operation, and any malfunctioning can prevent the machine from starting.

There are various motor issues that can cause a washing machine to fail to start. One possible issue is a faulty motor capacitor. The capacitor provides the initial boost of power to start the motor, and if it is defective, the motor may fail to start. Another potential problem could be a burned-out motor. This can occur due to overheating or prolonged use, resulting in the motor becoming incapable of starting the machine.

In addition, a loose or damaged motor belt can also prevent the washing machine from starting. The belt connects the motor to the drum, allowing the motor’s rotational force to be transferred for washing. If the belt is loose or torn, it will hinder the motor’s ability to function correctly, resulting in the machine not starting.

To troubleshoot motor issues, start by checking the capacitor. If it appears swollen or damaged, it likely needs to be replaced. Inspect the motor belt to ensure it is correctly tensioned and undamaged. If necessary, tighten or replace the belt. If these measures do not resolve the problem, it may be necessary to call a professional repair service to address the issue.

• Check the motor capacitor for any signs of damage or swelling
• Inspect the motor belt to ensure it is correctly tensioned and undamaged
• If necessary, replace the motor capacitor
• Tighten or replace the motor belt if needed
• Contact a professional repair service if the issue persists

By identifying and addressing motor issues, you can potentially resolve the problem of a washing machine that refuses to start. Remember to exercise caution and consider contacting a professional if you are unsure about performing any repairs yourself.

Check the Motor

When diagnosing why your washing machine isn’t starting, it’s essential to inspect the motor, as it serves as the heart of the appliance. The motor provides the necessary power for the machine to function, so any issues with it can cause the machine to fail to start. By examining the motor, you can identify potential problems and take corrective actions.

Begin by visually inspecting the motor for any visible signs of damage or malfunction, such as loose wires, burnt smells, or excessive dirt and debris. Ensure that all connections are secure and that there are no worn or frayed wires. If you notice any apparent issues, they may need to be addressed or replaced accordingly.

In addition to the visual inspection, it’s crucial to check the motor’s functionality. To do this, you can use a multimeter to test for continuity and resistance. This will help determine if any electrical components within the motor are faulty and need to be fixed or replaced.

Furthermore, you should check if the motor is receiving the proper power supply. Inspect the power cord and connections to ensure they are intact and functioning correctly. If necessary, try plugging the washing machine into another outlet or testing the outlet with a different appliance to rule out any power supply issues.

If you’ve examined the motor thoroughly and haven’t found any visible issues, it might be worth consulting a professional technician who specializes in washing machine repairs. They have the expertise and tools necessary to further troubleshoot and diagnose motor-related problems, ensuring an accurate and effective repair process.

Test the Motor Capacitor

In order to troubleshoot and potentially fix a washing machine that is not starting, it is important to test the motor capacitor. The motor capacitor is a vital component that helps the motor start and run smoothly. If the capacitor is faulty or defective, it can prevent the washing machine from starting or cause it to function abnormally.

Testing the motor capacitor requires a few simple steps. First, make sure the washing machine is completely disconnected from the power source to avoid any electrical accidents. Locate the motor capacitor, which is usually located near the motor. It is a cylindrical-shaped device with two or more electrical terminals.

Next, use a multimeter to test the capacitor’s capacitance. Set the multimeter to the capacitance position, denoted by the symbol “F” or “μF”. Carefully discharge the capacitor by placing the multimeter’s probes across the terminals, ensuring the two probes do not touch each other. Once discharged, connect the multimeter’s probes to the corresponding terminals on the capacitor.

Reading the multimeter will display the capacitance value of the capacitor. Compare the reading to the acceptable range specified by the manufacturer. If the reading is significantly lower or higher than the specified range, it is likely that the capacitor is faulty and needs to be replaced.

Additionally, it is important to visually inspect the capacitor for any signs of physical damage, such as bulging or leaking. These signs indicate that the capacitor is defective and should be replaced. If the capacitor passes the visual and capacitance tests, it is recommended to consult a professional technician for further evaluation.

In conclusion, testing the motor capacitor is an essential step in troubleshooting a washing machine that won’t start. By following the proper steps and ensuring the capacitor is functioning correctly, you can identify any issues and take the necessary steps to repair or replace the faulty component.

Replace the Motor

In this section, we will discuss the process of replacing the motor in your washing machine. The motor is a crucial component that powers the various functions of the machine. Over time, it may become worn out or damaged, leading to issues such as the machine not starting or running smoothly. Replacing the motor can help resolve these problems and get your washing machine up and running again.

Before you begin, make sure you have the necessary tools and replacement motor that is compatible with your specific washing machine model. It is also important to disconnect the power supply to the machine to ensure your safety throughout the process.

1. Start by accessing the motor compartment of the washing machine. This may involve removing the back panel or accessing it from underneath the machine, depending on the design of your appliance.
2. Once you have located the motor, examine its connections and wiring. Take note of how the motor is attached to the machine and any specific instructions provided by the manufacturer.
3. Disconnect the wires or cables connected to the motor. It is a good idea to take pictures or make a diagram of the connections before you remove them, as this can help during the reinstallation process.
4. Remove any mounting screws or brackets that are holding the motor in place. Carefully lift the motor out of its position and set it aside.
5. Install the new motor by reversing the steps above. Ensure that all connections are securely in place and that the motor is properly aligned with the machine.
6. Once the motor is securely installed, reattach any mounting screws or brackets and reconnect the wires or cables.
7. Double-check all connections to ensure they are secure and properly aligned. Inspect the motor compartment for any loose or misplaced parts.
8. Finally, switch on the power supply to the washing machine. Test the machine by running a short cycle to ensure that the new motor is functioning correctly.

Replacing the motor in your washing machine can be a challenging task, but with the right tools and instructions, it is a feasible DIY repair. If you are uncertain or uncomfortable with the process, it is always recommended to seek professional assistance to avoid any potential damage or safety hazards.

Overheating Problems

One of the issues commonly encountered with washing machines is overheating, which can prevent the machine from starting or cause it to stop mid-cycle. When a washing machine overheats, it means that the temperature inside the machine has exceeded safe limits. This can be caused by a variety of factors, including a malfunctioning thermostat, a clogged ventilation system, or excessive friction within the machine’s components.

One of the signs of overheating is when the machine feels excessively hot to the touch, even when it is not in use. Additionally, you may notice strange smells or unusual noises coming from the machine if it is overheating. It is important to address overheating issues as soon as possible to prevent further damage to the machine and ensure its proper functioning.

To troubleshoot and repair overheating problems in a washing machine, there are several steps you can take. First, check the ventilation system to ensure that air can flow freely in and out of the machine. Remove any lint or debris that may be obstructing the vents. Additionally, inspect the thermostat to see if it is functioning properly. If the thermostat is faulty, it may need to be replaced to prevent further overheating.

Another potential cause of overheating is excessive friction within the machine’s components. This can occur if certain parts are not properly lubricated or if there is a malfunctioning motor. To address this issue, thoroughly inspect the moving parts of the machine and apply lubricant as needed. If the motor is found to be faulty, it may need to be repaired or replaced.

In conclusion, overheating problems are common in washing machines and can prevent the machine from starting or interrupt its cycles. By checking the ventilation system, inspecting the thermostat, and addressing excessive friction, you can troubleshoot and repair these issues to ensure the proper functioning of your washing machine.

Clean the Ventilation System

Ensure proper airflow and ventilation for your washing machine by regularly cleaning the ventilation system. A well-maintained ventilation system is crucial for the efficient operation and longevity of your appliance.

Start by inspecting the ventilation ducts and hoses to identify any blockages or debris that may obstruct the airflow. Remove any lint, dust, or buildup that may have accumulated in these areas, as they can restrict the flow of air and cause your washing machine to malfunction.

Next, check the exhaust vent for any obstructions. Use a vacuum or a brush to clean out any lint or debris that may be clogging the vent. This will help to improve the airflow and prevent overheating of the machine.

It is also important to clean the lint filter regularly. The lint filter traps lint and other particles from the clothes during the washing and spinning cycles. A clogged lint filter can reduce the efficiency of the machine and cause it to stop working. Remove the lint filter from the machine and clean it thoroughly under running water. Allow it to dry completely before reinstalling it.

In addition to these regular maintenance tasks, consider scheduling a professional inspection and cleaning of the ventilation system. A professional technician can thoroughly clean the ducts, vents, and hoses to ensure optimal airflow and prevent any potential issues in the future.

By regularly cleaning the ventilation system of your washing machine, you can ensure proper functioning and prevent common problems such as the machine not starting or poor performance. Taking the time to maintain the ventilation system will extend the lifespan of your appliance and save you from costly repairs down the line.

• Tags:
• machine
• washing
• power
• switch
• control
• motor
• start
• issue
• board
• damage