Steps to Diagnose and Repair a Non-functioning Hair Dryer

Having a hair dryer that won’t turn on can be a frustrating experience, especially when you’re in a rush to get ready. Fortunately, there are some common issues that can cause this problem, and with a little troubleshooting, you may be able to fix it yourself. In this article, we will guide you through the steps to identify the potential problems and offer solutions to get your hair dryer up and running again.

First, it’s important to check if the power cord is securely plugged into the electrical outlet. Sometimes the plug can become loose over time, causing a poor connection that prevents the hair dryer from turning on. Make sure the plug is pushed in all the way and try a different outlet if necessary. Additionally, check if there are any visible damages to the power cord, such as frayed wires or exposed insulation. If you notice any damage, it’s crucial to replace the cord to avoid electrical hazards.

If the power cord is in good condition and properly connected, the next step is to check the hair dryer’s switches. Many dryers have multiple switches, such as a power switch and a heat setting switch. Make sure all switches are set to the correct position and functioning properly. Sometimes the switches can get stuck or become faulty over time. If you suspect a malfunctioning switch, it may be necessary to replace it with a new one. Consult the manufacturer’s instructions or seek professional assistance for guidance on replacing switches.

Another possible cause for a hair dryer not turning on is a clogged air vent. Over time, hair and debris can accumulate in the vent, obstructing the airflow and causing the dryer to overheat. This can trigger a safety feature that prevents the dryer from turning on. To fix this issue, unplug the dryer, remove any visible debris from the vent, and use a can of compressed air to blow out any remaining blockages. Cleaning the vent regularly can help prevent this problem from occurring in the future.

If none of the above solutions work, the problem may be more complex and require professional repair. In some cases, the motor or internal components of the hair dryer may be damaged or worn out, preventing it from turning on. Attempting to fix these internal issues yourself can be dangerous and may cause further damage. It’s recommended to contact the manufacturer or a professional repair service to assess and repair the hair dryer.

In conclusion, troubleshooting a hair dryer that won’t turn on involves checking the power cord and switches, cleaning the air vent, and seeking professional help if necessary. By following these steps, you may be able to identify and fix the problem, getting your hair dryer back in working condition.

Understanding the Problem

When your hair dryer refuses to turn on, it can be frustrating, especially when you are in a rush or need to style your hair. However, before you panic and rush to buy a new one, it’s important to understand the possible reasons behind the malfunction.

There could be several reasons why your hair dryer won’t turn on:

1. Power supply issues: Check if the hair dryer is properly plugged into a working electrical outlet. Sometimes, the problem might be as simple as a loose connection or a blown fuse.
2. Overheating: Hair dryers have built-in safety features that automatically shut off the device when it becomes too hot. This can happen if you’ve been using the dryer for an extended period or if the air vents are blocked by dust or debris.
3. Damaged cord or plug: Inspect the power cord and plug for any visible damage, such as fraying or exposed wires. If you notice any issues, it’s important to replace them to avoid electric shocks or further damage.
4. Malfunctioning switch: The switch that controls the on/off function of the hair dryer may be faulty or worn out. This can happen over time with regular use.

Understanding the potential causes of the problem can help you troubleshoot and fix the issue more effectively. In the next sections, we will discuss step-by-step solutions to each of these problems, so you can get your hair dryer up and running again in no time.

Identifying the Issue

When troubleshooting a hair dryer that won’t turn on, it’s important to first identify the potential issue causing the problem. Here are some common issues to look out for:

1. Power supply: Check if the hair dryer is properly plugged into a working electrical outlet. Ensure that the outlet itself is functioning by plugging in a different device.

2. Cord and plug: Inspect the power cord for any visible damage or cuts that could be causing an electrical short. Additionally, check the plug to see if it is bent, misshapen, or loose.

3. Safety features: Some hair dryers are equipped with safety features like a thermal fuse or overheat protection. If the hair dryer has been used for an extended period of time, these safety features may have been triggered. Allow the hair dryer to cool down and try turning it on again.

4. On/off switch: Check the on/off switch to see if it is stuck, loose, or damaged. Try toggling the switch multiple times to ensure it is functioning properly.

5. Motor: A faulty or burned-out motor can prevent a hair dryer from turning on. If you hear unusual noises or smell burning when attempting to turn on the hair dryer, the motor may need to be replaced.

6. Internal wiring: If none of the above issues are present, there may be a problem with the internal wiring of the hair dryer. This would require disassembling the hair dryer and conducting further inspection or repair.

By systematically checking for these potential issues, you can narrow down the cause of the problem and take appropriate steps to troubleshoot and fix the hair dryer.

Checking the Power Source

The first step in troubleshooting a hair dryer that won’t turn on is to check the power source. Sometimes, a simple issue with the power supply can be the cause of the problem. Here are a few things you can do to check the power source:

1. Check if the power outlet is working by plugging in another device. If the other device works, then the outlet is functioning properly.

2. Ensure that the hair dryer is plugged in securely. Sometimes the plug can become loose, preventing a proper connection. Try unplugging the hair dryer and plugging it back in firmly.

3. If your hair dryer has a detachable cord, check for any visible damage. Bent or frayed cords can interrupt the flow of electricity and prevent the hair dryer from turning on. If you notice any damage, it may be necessary to replace the cord.

4. Use a voltage tester or a multimeter to test the outlet’s voltage. Ensure that the voltage is within the acceptable range for your hair dryer (usually 120V in the United States). If the voltage is too low or too high, it may be necessary to contact a professional electrician to address the issue.

By checking the power source and eliminating any potential issues, you can quickly determine if the problem lies with the hair dryer or the power supply. If the hair dryer still won’t turn on after checking the power source, further troubleshooting steps will be necessary.

Examining the Power Cord

One of the most common reasons why a hair dryer won’t turn on is a faulty power cord. To determine if the power cord is the issue, you need to inspect it for any visible damage or wear.

Start by unplugging the hair dryer from the power outlet. Carefully examine the entire length of the power cord, looking for any cuts, frayed wires, or exposed copper. If you notice any damage, it’s important to replace the power cord to avoid electrical hazards.

If there are no visible signs of damage, gently flex the power cord in different directions. A loose or internally damaged wire can sometimes cause intermittent power connections. If you hear crackling sounds or the hair dryer turns on and off when flexing the cord, it’s a clear sign that the power cord needs to be replaced.

It’s also worth checking the plug at the end of the power cord. Make sure that all the prongs are intact and straight. If the prongs are bent or broken, it can prevent the hair dryer from receiving power. In such cases, you can try to straighten the prongs using pliers or replace the plug entirely.

If the power cord appears to be in good condition, plug the hair dryer into a different power outlet to rule out any issues with the electrical supply. Sometimes, a faulty outlet or a tripped circuit breaker can cause the hair dryer to not turn on.

By carefully examining the power cord and addressing any issues, you can troubleshoot and fix a hair dryer that won’t turn on due to power cord problems.

Inspecting for Visible Damage

When your hair dryer won’t turn on, the first step in troubleshooting is to inspect the appliance for any visible damage. Here are some things to look for:

• Power cord: Check the power cord for any cuts, frayed wires, or exposed wire. If you find any damage, the power cord may need to be replaced.
• Plug: Inspect the plug for any bent or broken prongs. If the prongs are damaged, you may need to replace the plug.
• Controls and buttons: Check the controls and buttons on the hair dryer for any signs of damage or wear. If any buttons are stuck or do not work properly, they may need to be replaced.
• Housing: Look for any cracks or dents in the housing of the hair dryer. If the housing is damaged, it may affect the internal components and prevent the hair dryer from turning on.
• Heating element: Carefully examine the heating element for any visible signs of damage, such as burn marks or discoloration. If the heating element is damaged, it may need to be replaced.

If you identify any visible damage during your inspection, it is important to address the issue before attempting any repairs or further troubleshooting. In some cases, simple repairs like replacing a power cord or plug may fix the problem. However, if the damage is extensive or if you are unsure how to proceed, it is recommended to seek professional assistance for repairs.

Testing for Continuity

If your hair dryer still won’t turn on after checking the power source and replacing the fuse, it may be necessary to test for continuity in the electrical components. Continuity is a term used to describe the uninterrupted flow of electricity through a circuit.

Before beginning the continuity test, ensure that the hair dryer is unplugged and the power cord is disconnected from the wall outlet. This will prevent any risk of electric shock during the testing process.

To test for continuity, you’ll need a multimeter, which is a handy device used to measure electric current, voltage, and resistance. Set the multimeter to the continuity setting, often indicated by a diode symbol or a sound wave symbol.

Take the multimeter’s probes and touch one probe to one end of the component you’re testing and the other probe to the opposite end. For example, if you’re testing the power switch, touch one probe to one terminal of the switch and the other probe to the other terminal. If the multimeter beeps or shows a reading of near zero, it means the component has continuity and is functioning properly. If there is no beep or the reading is infinite, it indicates a break in the circuit and the component may need to be replaced.

Continue testing each electrical component in the hair dryer, such as the motor, thermostat, heating element, and any other accessible parts. This process will help you identify which component is faulty and needs to be replaced.

It’s important to remember that testing for continuity should only be done by individuals with electrical knowledge and experience. If you’re not comfortable or familiar with working with electrical circuits, it’s best to seek professional assistance to avoid any potential risks or further damage to the hair dryer.

Checking the Switches and Buttons

If your hair dryer won’t turn on, the first thing to check is the switches and buttons. Sometimes, the problem can be as simple as a loose connection or a faulty switch. Here’s how you can troubleshoot and fix it.

1. Inspect the power switch: Make sure the power switch is in the “on” position. If it seems loose or doesn’t click into place, it may be broken or worn out. You can try cleaning the switch with a cotton swab and some rubbing alcohol to remove any dirt or debris that may be obstructing it.

2. Check other switches and buttons: Some hair dryers have additional switches or buttons for different settings, such as heat and speed controls. Test each one to ensure they are functioning properly. If any of them are stuck or not responding when pressed, they may need to be repaired or replaced.

3. Examine the cord and plug: Inspect the power cord for any signs of damage, such as frayed wires or exposed insulation. Also, check the plug for any bent or broken pins. If you find any issues, it’s best to replace the cord or plug to avoid potential electrical hazards.

4. Test with a different outlet: Plug your hair dryer into a different outlet to determine if the problem lies with the outlet or the appliance itself. If the hair dryer works fine in another outlet, the original outlet may be faulty and may need to be repaired or replaced.

5. Check for circuit breaker tripping: If the hair dryer repeatedly turns off or trips the circuit breaker, it may be drawing too much power. In this case, try using a lower heat or speed setting and see if the issue persists. If it does, the hair dryer may have an internal wiring problem that requires professional repair.

6. Consider the warranty: If your hair dryer is still under warranty, it’s best to contact the manufacturer or the place of purchase for assistance. They may be able to provide troubleshooting advice or arrange for a repair or replacement.

By systematically checking the switches and buttons, you can often identify and fix the problem causing your hair dryer to not turn on. If these steps don’t resolve the issue, it may be necessary to seek professional help or replace the hair dryer altogether.

Verifying Proper Functionality

Before diving into troubleshooting, it’s important to ensure that the hair dryer is in proper functioning condition. Here are a few steps you can take to verify its functionality:

1. Check the power source: Make sure that the hair dryer is plugged into a working electrical outlet. Try plugging another device into the same outlet to confirm that it is delivering power.
2. Inspect the power cord: Examine the power cord for any signs of damage or fraying. A damaged cord can prevent the hair dryer from receiving power. If you notice any issues, it may be necessary to replace the cord.
3. Test the outlet voltage: Use a voltage tester to check the voltage of the outlet. The hair dryer may not turn on if the outlet is not delivering the correct voltage. If the voltage is not within the acceptable range, consult an electrician to resolve the issue.
4. Test the circuit breaker: If the hair dryer is plugged into a GFCI outlet, check the circuit breaker located on the outlet. If it has tripped, press the reset button to restore power.
5. Try a different outlet: Plug the hair dryer into a different electrical outlet to see if it turns on. If it does, the original outlet may be faulty, and you may need to have it repaired.
6. Check for a reset button: Some hair dryers have a reset button located on the back or bottom of the handle. Press this button to reset the hair dryer and see if it powers on.
7. Inspect the switches and buttons: Ensure that all switches and buttons on the hair dryer are in the correct position. Sometimes, a simple misalignment can prevent it from turning on. Adjust them if necessary.
8. Confirm that the filter and vents are clean: A clogged filter or vents can cause the hair dryer to overheat and automatically shut off. Make sure they are free of debris and clean.

By following these steps, you can determine if there are any issues with the hair dryer’s functionality. If the hair dryer still won’t turn on, it may be necessary to proceed with troubleshooting and repair.

Fixing the Hair Dryer

If you have determined that the hair dryer is not turning on, there are a few steps you can take to troubleshoot and fix the issue before deciding to replace it.

1. Check the power source: First, make sure that the power outlet you are using is functioning properly. Plug in another device to confirm that the outlet is providing power. If the power outlet is not the problem, move on to the next step.

2. Check the power cord: Inspect the power cord for any signs of damage, such as fraying or exposed wires. If you find any issues, stop using the hair dryer immediately and contact a professional to repair or replace the cord.

3. Reset the circuit breaker: Hair dryers can sometimes cause a circuit breaker to trip. Locate the circuit breaker for the area where you are using the hair dryer and check if it has been tripped. If it has, reset it and try using the hair dryer again.

4. Check the on/off switch: Inspect the on/off switch of the hair dryer to ensure that it is functioning properly. Sometimes, the switch can become stuck or faulty. If necessary, replace the on/off switch with a new one.

5. Thermal fuse: Some hair dryers have a thermal fuse that can blow if the motor gets too hot. Check if your hair dryer has a thermal fuse and if it has blown. If it has, you may need to replace it to get the hair dryer working again. Contact the manufacturer or a professional for assistance with this step.

6. Motor issues: If none of the above steps have resolved the issue, the problem may lie with the motor of the hair dryer. Hair dryer motors can wear out over time and may need to be replaced by a professional.

If you are not comfortable or experienced in repairing electrical devices, it is always best to consult a professional or contact the manufacturer for assistance. Trying to fix the hair dryer on your own may lead to further damage or safety hazards.

Replacing the Power Cord

If your hair dryer is not turning on, a faulty power cord could be the culprit. To replace the power cord, follow these steps:

1. Unplug the hair dryer from the electrical outlet.
2. Locate the screws that secure the back cover of the hair dryer.
3. Use a screwdriver to remove the screws and take off the back cover.
4. Inside, you will find the power cord connected to the motor and control circuitry.
5. Identify where the power cord is connected and disconnect it from the components.
6. Take note of the specific connection points for later reference.
7. Get a replacement power cord that matches the specifications of your hair dryer.
8. Insert one end of the new power cord into the hair dryer’s housing, following the same path as the old cord.
9. Reconnect the other end of the new power cord to the appropriate components.
10. Securely fasten the back cover of the hair dryer with the screws.
11. Plug the hair dryer into the electrical outlet to test if it turns on.

If the hair dryer still doesn’t turn on after replacing the power cord, there may be a deeper issue with the internal components. In this case, it is recommend to seek professional repair or consider replacing the hair dryer altogether.

Removing the Old Cord

To fix a hair dryer that won’t turn on, the first step is to remove the old cord. Follow these steps:

1. Unplug the hair dryer from the power source.
2. Inspect the cord for any visible damage. If the cord is frayed, melted, or has exposed wires, it’s important to replace the entire cord.
3. Locate the cord strain relief, which is usually a small plastic piece near the base of the handle. It keeps the cord securely in place.
4. Use a small flathead screwdriver or a pair of needle-nose pliers to loosen the strain relief and remove it from the hair dryer.
5. Once the strain relief is removed, carefully pull the old cord out from the handle. Be sure to note how the cord is routed through the handle for easier installation of the new cord.

By removing the old cord, you’ll be able to inspect it for any damage and prepare to replace it with a new one. After removing the old cord, you can proceed with troubleshooting and fixing any other issues that may be causing your hair dryer to not turn on.

Attaching the New Cord

Replacing the cord of a hair dryer can be a straightforward process if you follow the steps carefully. Here’s how to attach the new cord:

1. Disconnect the power: Before you start, make sure the hair dryer is unplugged from the electrical outlet to avoid any accidents.
2. Remove the old cord: Use a screwdriver to remove any screws or clips securing the old cord to the hair dryer body. Carefully detach the old cord from the internal connections.
3. Prepare the new cord: Take the new cord and strip the insulation from the end using wire strippers. Make sure to expose enough wire for easy connection.
4. Connect the wires: Identify the color-coded wires in the hair dryer and match them to the corresponding wires on the new cord. Use wire connectors or soldering iron to securely connect the wires.
5. Insulate the connections: Once the wires are connected, use electrical tape or heat shrink tubing to insulate and protect the connections. This ensures safety and prevents any electrical shocks.
6. Secure the new cord: Carefully route the new cord through any channels or hooks inside the hair dryer body. Make sure it is not pinched or strained. Use screws or clips to secure the cord in place.
7. Reassemble the hair dryer: Put the hair dryer back together by reattaching any panels or covers that were removed. Screw them into place securely.

Remember to double-check all the connections and ensure that the cord is properly insulated and secured before plugging the hair dryer back in.

By following these steps, you should be able to successfully attach a new cord to your hair dryer and get it working again. If you are unsure about any part of the process or if the issue persists, it is recommended to consult a professional technician.

Repairing or Replacing the Switches

To repair the switches, you will need to open up the hair dryer’s housing. Start by unplugging the hair dryer to ensure your safety during the repair process. Use a screwdriver to remove any screws holding the housing together.

Once the housing is open, locate the power and heat switches. Inspect them for any signs of damage or loose connections. If you notice any loose wires, carefully reconnect them to their corresponding terminals. If the switches are visibly damaged, you will need to replace them with new ones.

To replace the switches, you can either order the specific replacement parts from the manufacturer or purchase universal switches that are compatible with your hair dryer. Follow the instructions provided with the replacement switches to ensure proper installation.

After repairing or replacing the switches, reassemble the hair dryer’s housing and screw it back together. Plug the hair dryer into the outlet and test if it turns on. If the issue was indeed with the switches, your hair dryer should now work properly.

If the hair dryer still doesn’t turn on after repairing or replacing the switches, it may be a more complex problem, and it is recommended to seek professional repair or consider purchasing a new hair dryer.

Opening the Dryer Housing

Before attempting to open the housing of your hair dryer, make sure it is completely unplugged from the power source. This will help avoid any potential electrical shock or accidents.

Once unplugged, locate the screws that hold the housing together. These screws are usually found at the back of the dryer or underneath rubber feet. Use a screwdriver appropriate for the screw type and size to loosen and remove the screws.

After removing the screws, gently pry open the housing using a flathead screwdriver or a plastic opening tool. Start from one corner and work your way around, being careful not to apply too much force to avoid damaging the housing or any internal components.

As you open the housing, be mindful of any cables or wires that may be connected to various components. Take note of their positions and connections for later reference when reassembling the dryer.

Once the housing is partially opened, you may need to disconnect any wire or cable connections inside. Use caution and gentle maneuvers to avoid bending or breaking any wires.

Finally, fully open the housing and set it aside in a safe place. Now you will have access to the internal components of the hair dryer and can proceed with troubleshooting and fixing the issue that is preventing it from turning on.

Repairing Faulty Switches

In some cases, the issue with a hair dryer not turning on may be due to a faulty switch. Here are the steps to follow to repair a faulty switch:

1. Unplug the hair dryer from the power source to ensure safety.

2. Remove the housing of the hair dryer to access the internal components. This may involve unscrewing screws or releasing clips, depending on the specific model.

3. Locate the switch within the hair dryer. It is typically located near the handle and may be a small push-button or a slider switch.

4. Inspect the switch for any signs of damage or corrosion. If the switch appears to be damaged, it will require replacement. If there is corrosion, gently clean the switch with a cotton swab dipped in rubbing alcohol.

5. Test the switch by using a multimeter. Set the multimeter to the resistance or continuity mode and touch the probes to the different terminals of the switch. If there is no continuity or resistance when the switch is in the “on” position, it is likely faulty and needs replacing.

6. If the switch needs to be replaced, carefully remove it from the hair dryer by desoldering or releasing any connectors. Take note of how the switch is connected so that you can properly install the new switch.

7. Obtain a replacement switch that matches the specifications of the original switch. This can be done by searching for the hair dryer’s model number and switch specifications online or contacting the manufacturer.

8. Install the new switch by connecting it in the same way as the old switch. Solder or securely connect any wires or connectors as necessary.

9. Reassemble the housing of the hair dryer, making sure to tighten any screws or secure any clips.

10. Plug the hair dryer back into a power source and test the switch. The hair dryer should now turn on properly if the switch was the issue.

If the hair dryer still does not turn on after repairing or replacing the switch, further troubleshooting may be needed to identify and fix the problem.

Replacing Irreparable Switches

If you have determined that the issue with your hair dryer is a faulty switch and it cannot be repaired, you will need to replace it. Here are the steps to replace an irreparable switch:

1. Unplug the hair dryer: Before starting any repairs, ensure that the hair dryer is unplugged from the power source to avoid any accidents or electric shocks.
2. Remove the back cover: Most hair dryers have screws or clips on the back cover that hold it in place. Use a screwdriver or gently release the clips to remove the cover and expose the internal components.
3. Locate the faulty switch: Identify the switch that needs to be replaced. Switches are typically located near the handle or control panel of the hair dryer.
4. Disconnect the switch: Carefully detach the wires connected to the faulty switch. Take note of their positions or take a picture for reference when installing the new switch.
5. Replace the switch: Obtain a compatible switch for your hair dryer. You can find replacements at hardware stores or online. Follow the manufacturer’s instructions to install the new switch, connecting the wires in the correct positions.
6. Reassemble the hair dryer: Put the back cover back onto the hair dryer and secure it with screws or clips. Make sure it is properly aligned and fits snugly.
7. Test the hair dryer: Plug in the hair dryer, set it to the desired settings, and turn it on to check if the new switch is working properly. If the hair dryer turns on and functions as expected, the replacement was successful.

If you are unsure about any step or do not feel confident in replacing the switch yourself, it is advisable to seek professional assistance or take the hair dryer to a qualified technician for repair.

Note: Always prioritize safety when working with electrical appliances. If you are not comfortable or experienced with handling electrical repairs, it is best to leave it to professionals.

Examining the Motor

If your hair dryer still doesn’t turn on after checking the power cord and switch, the problem may lie with the motor. The motor is the key component responsible for generating airflow and heat. Follow these steps to examine the motor:

1. Unplug the hair dryer from the power source.
2. Remove the back cover of the hair dryer using a screwdriver.
3. Locate the motor, which is usually positioned near the rear of the dryer.
4. Check for any visible damage or debris that might be blocking the motor or its vents.
5. Clean the motor and its surrounding area using a soft brush or compressed air. Be careful not to damage any delicate components.
6. Inspect the wiring connected to the motor. Look for loose or disconnected wires.
7. If you notice any visible damage to the motor or wiring, it may need to be replaced.
8. Reassemble the hair dryer by replacing the back cover and securing it with screws.

If the motor appears to be in good condition and there are no visible issues, the problem may be more complex and require professional repair. In such cases, it is recommended to take the hair dryer to a certified technician or contact the manufacturer for assistance.

By examining the motor and addressing any issues, you can troubleshoot and fix a hair dryer that won’t turn on. Remember to always prioritize safety and consult a professional if you are unsure about any repairs.

Cleaning the Motor

If your hair dryer still won’t turn on after checking the power source and the controls, the issue might be a dirty or clogged motor. Over time, dust, lint, and hair can accumulate in the motor, causing it to overheat and fail. Cleaning the motor is a simple process that can often fix the problem.

Before attempting to clean the motor, make sure to unplug the hair dryer from the power outlet. This is important to avoid any electrical mishaps during the cleaning process.

Start by removing the back cover or grille of the hair dryer. The location of the motor may vary depending on the model. Once you have access to the motor, use a small brush with soft bristles to gently remove any debris or build-up. Avoid using water or any liquid cleaning agents directly on the motor, as this can cause damage.

Pay extra attention to the fan blades and the vents around the motor. These areas often accumulate large amounts of dust and lint, which can impact the performance of the hair dryer. Use the brush to carefully clean these areas, ensuring that all debris is removed.

Once you have finished cleaning the motor and the surrounding areas, reattach the back cover or grille securely. Make sure all the screws are tightened properly to ensure safety and prevent the hair dryer from overheating.

After cleaning the motor, plug the hair dryer back into the power outlet and test whether it turns on. If it still doesn’t work, there might be a more significant issue with the motor, and it may need to be repaired or replaced by a professional.

Note: Cleaning the motor should be done periodically to prevent excessive build-up and extend the lifespan of the hair dryer. It’s also important to follow the manufacturer’s instructions for cleaning to avoid voiding any warranties.

If you’re unsure about cleaning the motor yourself or if the hair dryer is still not working properly after cleaning, it’s recommended to consult a professional technician or contact the manufacturer for further assistance.

• Tags:
• hair
• dryer
• power
• switch
• cord
• turn
• replace
• damage
• motor
• check