The Ultimate Repair Guide for a Kettle with a Damaged Lid

Discovering a malfunction in our everyday appliances is an all-too-common occurrence. Whether it’s a stove, a refrigerator, or a toaster, these inconveniences can disrupt our daily routines and leave us feeling frustrated. One such issue that many of us may encounter is a faulty electric kettle lid. While it may seem like a minor inconvenience, a broken lid can hinder the functionality and safety of the kettle. However, fear not! With a bit of ingenuity and the right tools, you can easily fix your kettle’s broken lid and restore it to perfect working condition.

Before we delve into the repair process, it’s important to understand why fixing a broken kettle lid is crucial. Apart from the obvious inconvenience of not being able to effectively use the kettle, a broken lid can pose potential safety hazards. An ill-fitting or damaged lid can result in steam leakage, which may lead to burns or scalds. Additionally, a broken lid could prevent the kettle from automatically switching off when the water has reached boiling point, putting you at risk of fire or electrical hazards.

When it comes to repairing a faulty kettle lid, one of the key steps is identifying the cause of the issue. In some cases, it could be a simple matter of a loose hinge or latch, while in others, a more complex mechanism may require attention. By carefully examining the lid and its components, you can gain a better understanding of what needs to be fixed. This initial inspection will help you determine if a quick DIY solution is possible or if seeking professional assistance is necessary.

Section 1: Diagnosing the Issue

Before proceeding with any repairs, it is crucial to properly diagnose the problem at hand. By accurately identifying the issue, you can plan the necessary steps to restore your kettle to its full functionality without a broken lid.

• Begin by carefully inspecting the lid area of your kettle to identify any visible signs of damage or misalignment.
• Check if the lid is not closing properly, or if it is loose and wobbly when attempting to close it.
• Observe any unusual sounds or vibrations that occur while using the kettle, as they may indicate an underlying problem.
• If the lid does not fit snugly, examine the hinge mechanism to determine if it is faulty or if there are any obstructions preventing proper operation.
• Take note if there is any leakage around or beneath the lid, as this could be a sign of a broken seal or damaged lid components.
• Ensure that any electrical components related to the lid, such as switches or sensors, are functioning correctly.

By systematically evaluating these aspects, you will gain a clearer understanding of the issue at hand, enabling you to proceed with the appropriate repairs and restore the functionality of your kettle’s lid.

Step 1: Identifying the Damaged Lid

In the first step of the repair process, we need to accurately observe and determine which part of the kettle lid is broken or damaged. By closely examining the lid, you will be able to identify any visible cracks, chips, or missing pieces that are affecting its functionality.

Take your time to thoroughly inspect the lid, paying attention to its different components such as the handle, hinge, and locking mechanism. Check for any signs of wear and tear or irregularities that may have led to the lid becoming faulty.

It is important to note that a broken lid can be caused by various factors, including accidental drops, excessive force, or prolonged usage. Keep in mind that the severity and type of damage will affect the repair method you choose.

During this step, it is helpful to document the specific areas of damage by taking clear photographs or making notes. This will assist you in finding appropriate replacement parts or seeking professional assistance if necessary.

Step 2: Examining the Lid Hinge

Now that we have a general understanding of the issue at hand, it is time to take a closer look at the hinge of the kettle lid. This section will focus on examining the hinge mechanism and identifying any potential problems that may be causing the lid to be dysfunctional.

Begin by carefully inspecting the hinge for any visible signs of damage or wear. Look for cracks, breakages, or misalignment. A damaged or worn hinge can prevent the lid from properly closing or opening, leading to functionality issues.

Next, try opening and closing the lid to observe its movement. Pay close attention to any resistance or inability to operate smoothly. A hinge that is rusted, bent, or stuck can greatly inhibit the lid’s functionality. Take note of any unusual sounds or grinding sensations, as these can indicate underlying issues with the hinge.

If you notice any issues with the hinge, it may be necessary to disassemble it for a more thorough examination. This will involve removing any screws or fasteners that hold the hinge in place. Take care not to lose any small parts during this process.

Once the hinge is disassembled, inspect each component individually. Look for signs of damage, excessive wear, or misalignment. If any part appears to be faulty, it may need to be replaced. Refer to the kettle’s user manual or consult a professional for guidance on obtaining replacement parts.

After thoroughly examining the lid hinge and identifying any potential problems, you will be ready to proceed with the necessary repairs. The next step will guide you through the repair process, addressing the specific issues discovered during the examination of the hinge.

Step 3: Checking for Other Issues

After addressing the primary issue of the broken lid, it is important to thoroughly inspect the kettle for any other potential problems. Identifying and resolving these additional issues can help ensure the optimal functioning of the kettle and prevent future breakdowns.

Start by examining the kettle’s exterior for any signs of damage or wear. Look for dents, scratches, or corrosion that may affect the kettle’s overall durability and performance. If any issues are detected, consider repairing or replacing the affected parts to maintain the kettle’s integrity.

Next, it is essential to inspect the kettle’s handle and spout. Check for any loose or wobbly parts that could pose a safety risk or cause inconvenience during use. Tighten any loose screws or connections, and lubricate hinges or moving parts as needed.

Additionally, take a close look at the kettle’s electrical components. Check the power cord for any fraying or damage and ensure that it is securely plugged into an outlet. Examine the heating element and thermostat for any signs of malfunction, such as discoloration or burning. If any electrical issues are detected, it is recommended to seek professional assistance or replace the faulty components.

Furthermore, pay attention to the kettle’s interior. Some common problems to look out for include limescale buildup, rust, or leaks. Clean the interior of the kettle regularly to prevent buildup and maintain water quality. If rust or leaks are present, consider descaling the kettle or replacing any damaged parts to prevent further damage or potential health hazards.

Lastly, do a final check of the kettle’s overall functionality. Test the lid to ensure it opens and closes smoothly without any resistance. Fill the kettle with water and turn it on to check for abnormal noises, vibrations, or irregular heating patterns. If any issues persist, consult the manufacturer’s instructions or contact customer support for further guidance.

By thoroughly examining the kettle for any other potential issues and resolving them promptly, you can ensure the longevity and reliable performance of your kettle, allowing for uninterrupted use and enjoyment of your favorite hot beverages.

Section 2: Gathering the Necessary Tools

In this section, we will discuss the essential tools required for repairing a kettle with a damaged lid. Having the right tools on hand is crucial to ensure a successful repair process and save both time and money. By gathering these necessary tools, you can feel confident in tackling the repair project with ease.

Firstly, it is important to have a set of screwdrivers in various sizes. These tools will allow you to remove any screws or bolts holding the kettle lid in place, enabling you to access the broken components inside. Make sure to have both flathead and Phillips head screwdrivers to accommodate different types of screws.

In addition to screwdrivers, a pair of pliers is essential for any kettle lid repair. Pliers can be used to grip and manipulate small parts, making it easier to fix or replace broken components. Choose pliers with a comfortable grip and a narrow nose for precise handling.

An adjustable wrench is another essential tool to have. This tool will come in handy when dealing with any stubborn or tightly secured nuts or bolts holding the kettle lid together. An adjustable wrench allows you to adjust the size to fit different nut sizes, providing a secure and sturdy grip during the repair process.

Next, it is important to have a soldering iron and soldering wire. A soldering iron is needed to connect wires, repair any electrical components, or solder broken parts of the kettle lid. Make sure to have a clean and well-maintained soldering iron to ensure effective and efficient repairs.

Lastly, a multimeter is a crucial tool for diagnosing any electrical issues with the kettle lid. This tool measures electrical currents, resistance, and voltage, helping you identify any faulty components that may be causing the lid to malfunction. With a multimeter, you can accurately troubleshoot and pinpoint the root cause of the problem.

Gathering these necessary tools will set you up for success in repairing a kettle with a broken lid. By having the right tools at your disposal, you can confidently approach the repair process, ensuring a thorough and effective repair solution.

Step 1: Tools for Removing the Lid

When it comes to repairing a kettle with a damaged lid, having the right tools is essential. In this step, we will discuss the necessary equipment you will need to safely remove the lid and proceed with the repair process.

1. Screwdriver: A screwdriver is an indispensable tool when it comes to dismantling appliances. Ensure you have a suitable screwdriver that matches the screws commonly used in kettle lids.

2. Pliers: Pliers come in handy for gripping and holding various parts of the kettle while you work on removing the lid. Make sure you have a pair of pliers with a comfortable grip for easier handling.

3. Pry Tool: A pry tool or a flathead screwdriver can be useful for gently prying open the lid if it’s stuck or jammed. Use it with caution to avoid causing any further damage.

4. Safety Gloves: It’s important to protect your hands during the repair process. Wear a pair of sturdy safety gloves to prevent any potential injuries or burns from hot surfaces.

5. Cleaning Cloth: Before removing the lid, it’s a good idea to have a cleaning cloth handy to wipe away any dirt or debris that may have accumulated around the lid area, ensuring a cleaner workspace.

6. Container for Screws: To avoid misplacing any screws or small parts, have a small container ready to hold them safely. This will help you stay organized and prevent any issues during reassembly.

By having these tools prepared ahead of time, you’ll be better equipped to tackle the lid removal process, increasing your chances of completing a successful repair.

Step 2: Tools for Repairing the Hinge

In order to fix the hinge of your kettle lid, you will need a set of essential tools that will assist you in completing the repair effectively. These tools are specifically chosen to match the requirements of this repair task, ensuring that you have everything necessary to successfully fix the broken hinge of your kettle lid. By having these tools at hand, you can confidently move on to the next steps of the repair process.

Here is a list of tools you will need:

1. Screwdriver set: You’ll need a set of screwdrivers with different sizes and types to remove the screws that hold the hinge in place.
2. Needle-nose pliers: These pliers have long, thin jaws that are useful for gripping small parts and bending or straightening metal.
3. Small hammer or mallet: A small hammer or mallet is necessary for gentle tapping or striking, when needed, to loosen stuck parts or secure them together.
4. Replacement hinge: Depending on the specific issue with your kettle’s lid hinge, you may need to purchase a replacement hinge. Make sure to find a hinge that is compatible with your kettle model.
5. Clean cloth: It’s important to have a clean cloth handy to wipe away dirt, dust, or any other substances that may interfere with the repair process.

Having these tools readily available will save you time and ensure that you have everything necessary to successfully repair the hinge of your kettle’s lid. With these tools in hand, you’re ready to proceed to the next step of the repair process.

Section 3: Removing the Damaged Lid

In this section, we will explore the steps necessary to detach the lid that is no longer functional, enabling you to replace it with a new one and restore the functionality of your kettle.

Firstly, it is essential to ensure the kettle is disconnected from any power source to avoid any potential accidents or injuries. Once the kettle is unplugged, carefully place it on a stable and flat surface to work on comfortably.

Step 1: Inspect and Assess the Lid

Take a closer look at the lid to determine the extent of the damage and the type of fasteners that are holding it in place. Some kettles may have screws, clips, or other mechanisms securing the lid, while others may require a specific tool to remove it.

Step 2: Gather the Necessary Tools

Once you have identified the fasteners or mechanisms, gather the appropriate tools required to detach the lid. This might include a screwdriver, pliers, or any other specialized tool mentioned in the manufacturer’s instructions or your research. Having the right tools on hand will make the process more efficient.

Step 3: Begin the Removal Process

Now that you have the necessary tools, start carefully removing the fasteners or mechanisms that are keeping the broken lid in place. Follow the manufacturer’s instructions, if available, or use your judgment based on the lid’s design and inspection. Use the chosen tools methodically to avoid damaging any other components of the kettle.

Step 4: Detach the Broken Lid

Once all the fasteners or mechanisms have been removed, gently lift and separate the broken lid from the kettle. Take caution when doing this, as there might be loose parts or sharp edges that could cause harm. Dispose of the damaged lid appropriately.

Step 5: Clean and Prepare for Replacement

After removing the broken lid, it is important to clean any debris or residue that might have accumulated. Use a damp cloth or mild cleaning solution to wipe down the kettle’s interior and exterior surfaces. Ensure that the kettle is completely dry before proceeding with the replacement of the lid to avoid any potential damage.

With the broken lid successfully removed, you are now ready to move on to the next section, where we will guide you through the process of selecting and installing a new lid for your kettle.

Step 1: Disconnecting the Kettle from Power

Before starting any repairs on your kettle’s broken lid, it is important to ensure that the kettle is completely disconnected from its power source. This step is critical to guarantee your safety during the repair process.

To disconnect the kettle from power, follow the steps below:

By properly disconnecting the kettle from power, you eliminate the risk of electrical hazards and protect yourself from potential injuries. Once you have ensured that the kettle is safely disconnected, you can proceed with the necessary repairs for the broken lid.

Step 2: Unscrewing the Lid

In this step, we will focus on the process of removing the lid from the kettle, allowing us to gain access to the inner components. By carefully unscrewing the lid, we can begin the repair process for a broken kettle lid. Follow these instructions to successfully unscrew the lid and proceed with the repair.

Step 3: Safely Removing the Lid

After identifying the issue with your kettle lid, it is important to follow proper safety measures when removing it. This step will guide you on how to safely detach the lid from the kettle without causing any damage.

• Start by ensuring that the kettle is unplugged from the power source to avoid any electrical risks during the repair process.
• Gently hold the kettle with one hand, ensuring a firm grip, while using the other hand to locate the lid handle.
• Depending on the design of your kettle lid, there may be a release button, latch, or screws holding it in place. Carefully inspect and identify the mechanism holding the lid before proceeding further.
• If your kettle lid has a release button, press it firmly to disengage the locking mechanism. If there is a latch, gently lift or pull it to unlock the lid. For lids secured with screws, use a suitable screwdriver to loosen and remove them.
• Once the locking mechanism is disengaged or the screws are removed, proceed to lift the lid upwards. Exercise caution to avoid any sudden movements that may cause the lid to break or detach forcefully.
• If the lid seems stuck or resistant to removal, do not force it. Instead, try wiggling it gently from side to side or applying a small amount of lubricant to ease the movement. This will prevent further damage to the lid or kettle.
• Once the lid is successfully detached, inspect it for any additional damages or wear and tear that may require repair or replacement.

By following these steps, you can safely remove the broken lid of your kettle without causing any further harm to the appliance. Proceed to the next step to learn how to repair or replace the lid effectively.

Section 4: Repairing or Replacing the Hinge

In this section, we will explore various methods for addressing the issue with the hinge on your kettle’s lid. The hinge is responsible for connecting the lid to the kettle and allowing it to open and close smoothly. If the hinge is damaged or broken, it can hinder the functionality of the kettle and make it difficult to use.

One potential solution for repairing the hinge is to examine it closely to identify the cause of the issue. It could be that the hinge is simply loose and needs to be tightened. In this case, you can use a screwdriver or another appropriate tool to tighten the screws or bolts that hold the hinge in place.

If the hinge is beyond repair or the damage is severe, you may need to consider replacing it altogether. This can be done by purchasing a new hinge that is compatible with your kettle. Online retailers, appliance stores, or the kettle’s manufacturer may have the replacement hinges available. Take note of the specific model and brand of your kettle to ensure you find the correct replacement hinge.

When replacing the hinge, it is important to follow the manufacturer’s instructions carefully. This may involve removing the old hinge using a screwdriver or other tools, then attaching the new hinge using the provided hardware. Additionally, make sure to thoroughly clean the area around the hinge before installing the new one to ensure optimal functionality and durability.

Please note that repairing or replacing the hinge can be a delicate process, so it is necessary to exercise caution and patience. If you are unsure about how to proceed or encounter any difficulties, it may be best to seek professional assistance from a qualified technician or contact the manufacturer for guidance.

By repairing or replacing the hinge on your kettle’s lid, you can restore its functionality and ensure that it continues to serve you well in boiling water for years to come. Remember to always handle the kettle with care, avoiding any excessive force or impact that could cause damage to the hinge or other components.

Step 1: Inspecting the Hinge Damage

Before beginning any repairs, it is essential to carefully assess the condition of the hinge on your kettle’s lid. This step will help you determine the extent of the damage and understand the necessary steps to fix it. By inspecting the hinge closely, you can identify any cracks, breaks, or misalignments that may be causing the lid to malfunction.

Why is inspecting the hinge damage important?

In order to successfully repair your kettle’s broken lid, it is crucial to understand the specific issues with the hinge. By inspecting the hinge damage, you can determine if it is a minor problem that can be fixed with simple adjustments or if it requires more extensive repairs. This step allows you to gather the necessary tools and materials before proceeding with the repair process.

What to look for during the inspection?

During the inspection, carefully examine the hinge for any signs of damage. Look for cracks, chips, or any form of physical harm that may affect the functionality of the hinge. Additionally, check for misalignments or looseness that could be causing the lid to detach or not close properly. Pay close attention to the moving parts, ensuring they are intact and free from any obstructions or debris.

How to inspect the hinge?

To inspect the hinge, open and close the kettle’s lid multiple times, observing its movement and any unusual sounds or resistance. Use your fingers to gently apply pressure on the hinge’s different parts to check for stability and strength. If necessary, you can remove the lid from the kettle to get a better view of the hinge and its condition.

Take proper notes of the hinge damage:

While inspecting the hinge, it is advisable to take notes or pictures of the specific damage. This will help you adequately address the issues during the repair process and ensure that you don’t miss any crucial steps. These notes will serve as a reference guide throughout the repair, helping you stay organized and focused on fixing the hinge.

Once you have completed the inspection and have a clear understanding of the hinge damage, you can proceed to the next step of repairing your kettle’s broken lid.

Step 2: Fixing a Damaged Hinge

In this step, we will focus on repairing a hinge that has been damaged on your kettle’s lid. The hinge is an essential component that allows the lid to open and close smoothly. If your kettle’s lid is not functioning properly, it may be due to a broken or damaged hinge. Fortunately, fixing a damaged hinge can be relatively straightforward with the right tools and materials.

To begin the repair process, you will need to gather the following materials:

First, carefully examine the extent of the damage to the hinge. If the hinge is broken or detached from the lid, it may need to be replaced. Using a screwdriver, remove any screws or fasteners holding the damaged hinge in place. If there are any adhesive residues, use a sanding block to smooth them out.

If a replacement hinge is required, carefully remove the old hinge and replace it with a new one. Ensure that the new hinge aligns with the existing holes on both the lid and kettle body. Secure the new hinge in place using screws or fasteners, taking care not to overtighten them.

If the existing hinge can be repaired, apply a small amount of epoxy adhesive to the damaged area. Make sure to follow the instructions on the adhesive packaging for the best results. Press the damaged parts of the hinge together and hold them in place until the adhesive sets.

Once the adhesive has fully cured, test the hinge’s functionality by opening and closing the lid several times. If the lid moves smoothly and securely, the repair has been successful. If desired, you can also paint the repaired hinge to match the color of your kettle, ensuring a seamless appearance.

Remember to exercise caution when working with tools and materials, and always follow safety guidelines. By following these steps, you will be able to fix a damaged hinge on your kettle’s lid and restore its functionality.

Step 3: Replacing the Hinge

In this step, we will address the issue of a broken hinge on your kettle lid. The hinge plays a crucial role in keeping the lid securely attached to the kettle, allowing for easy opening and closing. Without a functional hinge, the lid may not close properly, leading to heat and steam escaping from the kettle during use. To resolve this problem, we will guide you through the process of replacing the broken hinge with a new one.

To begin, gather the necessary tools and materials for this repair. You will need a screwdriver, a replacement hinge suitable for your kettle model, and any additional hardware that may be required. Refer to your kettle’s user manual or consult the manufacturer’s website to ensure you obtain the correct hinge for your specific model.

Start by removing the screws that secure the broken hinge to the kettle. Carefully unscrew each one in a clockwise direction, ensuring not to strip or damage the screws. Once all the screws are removed, detach the old hinge from the kettle and set it aside.

After removing the old hinge, align the new hinge with the existing holes on the kettle. Ensure that it fits securely and snugly in place. Once properly aligned, use the screwdriver to insert and tighten the screws into the holes. Double-check that they are securely fastened to prevent any potential issues in the future.

Finally, test the functionality of the new hinge by opening and closing the kettle lid. Ensure that it moves smoothly and securely without any resistance or wobbling. If everything seems to be in order, congratulations! You have successfully replaced the broken hinge on your kettle lid.

In conclusion, replacing the hinge on your kettle lid is an essential step in restoring its functionality. By following these instructions carefully, you can ensure that your kettle will once again be a reliable and efficient tool for boiling water. Remember to exercise caution and consult a professional if you encounter any difficulties during the repair process.

Section 5: Reattaching the Lid

In this section, we will discuss the process of reattaching the lid of your kettle, providing you with a step-by-step guide on how to successfully restore the functionality of your appliance. Reconnecting the lid to your kettle is a crucial step in ensuring that it can effectively retain heat and prevent any potential accidents or spills.

Before beginning the reattachment process, it is important to ensure that you have all the necessary tools and materials at hand. This may include a screwdriver, adhesive, replacement parts (if required), and any other items recommended by the manufacturer or appropriate repair guide.

The first step is to carefully examine the lid and the corresponding attachment points on the kettle. Identify any broken or damaged parts that may require repair or replacement. If necessary, consult a suitable repair guide or contact the manufacturer to obtain the correct replacement parts.

Next, clean the attachment points on both the lid and the kettle to ensure a secure bond. Remove any residue or debris that may hinder the reattachment process. A clean surface will promote stronger adhesion between the lid and the kettle.

If the lid simply needs to be reattached, use a screwdriver or appropriate tool to secure it in place. Follow the manufacturer’s instructions or repair guide for correct positioning and fastening techniques. Ensure that the lid fits snugly and securely to prevent any future issues.

If the attachment points are damaged or cannot be repaired, you should consider using adhesive to secure the lid. Apply the adhesive according to the manufacturer’s instructions, ensuring thorough coverage and even distribution. After applying the adhesive, hold the lid in place firmly for the recommended curing time to ensure a strong bond.

Once the lid is successfully reattached, allow sufficient curing time, if applicable, before using the kettle again. This will ensure that the lid is securely fixed and will not come loose during operation.

Remember to always follow the manufacturer’s recommendations and safety guidelines when repairing appliances. If in doubt, consult a professional to ensure proper repair and safe usage of your kettle.

Step 1: Aligning the Lid with the Kettle

In the initial phase of repairing your kettle, the first step involves ensuring proper alignment between the lid and the kettle body. This is a crucial step as it sets the foundation for fixing the broken lid effectively. By aligning the lid correctly with the kettle, you can guarantee a secure and functional fix.

Inspect the Lid: Before attempting to align the lid, carefully examine it for any visible damage or misalignment. Look for signs of wear and tear, cracks, or any other issues that could affect its fit on the kettle body.

Adjusting the Hinges: If the hinges are loose or misaligned, it may cause the lid to sit improperly on the kettle. To address this, you can try tightening the screws or bolts that hold the hinges in place. Use a suitable screwdriver or wrench to ensure a secure fit, making sure not to overtighten and risk damaging the parts.

Aligning the Lid: Place the lid on the kettle body, ensuring that the edges and hinges align correctly with the corresponding parts on the kettle. Gently press down on the lid to ensure a snug fit. If the lid feels loose or wobbly, it may require further adjustments.

Testing the Alignment: Once the lid and kettle are aligned, give the lid a gentle shake or tap to test its stability. A properly aligned lid should stay securely in place without wobbling or falling off. If there is still some movement or instability, repeat the previous steps to fine-tune the alignment.

Note: It is essential to proceed with caution during this repair process to avoid any accidental damage to the kettle or lid. If you encounter any difficulties or feel unsure about handling the repair yourself, it is recommended to seek professional assistance.

Step 2: Attaching the Lid to the Hinge

In this step, we will focus on the process of securely fastening the lid to the hinge of the kettle. By following these instructions, you will be able to ensure that the lid is properly attached, allowing for smooth and effortless opening and closing.

Firstly, examine the hinge on the kettle and ensure that it is clean and free from any debris or obstructions. This will provide a solid foundation for attaching the lid. Use a soft cloth or a gentle cleaning solution to wipe away any dirt or grime.

Next, locate the corresponding hinge on the lid itself. Position the lid in a way that aligns the hinge with the one on the kettle. It is crucial to ensure the proper alignment for a secure attachment. Take your time to carefully line up the pieces.

Once aligned, insert the hinge pin into the hinge holes on both the kettle and the lid. Apply gentle pressure to secure the pin in place, ensuring that it fits snugly. Use caution while inserting the pin to avoid any damage to the hinge or the lid.

After the pin is successfully inserted, test the lid to verify that it opens and closes smoothly without any resistance. If you notice any issues, double-check the alignment and make any necessary adjustments. The lid should move freely without any wobbling or sticking.

In summary, attaching the lid to the hinge involves cleaning, aligning, and securely inserting the hinge pin. By following these steps, you will be able to fix a kettle with a broken lid and ensure that it functions properly. Now that the lid is attached, we can proceed to the next step in the repair process.

• Tags:
• lid
• kettle
• hinge
• repair
• ensure
• damage
• step
• tool
• remove
• issue