Fixing a Hair Dryer That Keeps Shutting Off While Being Used

Are you frustrated by the unexpected shutdowns of your trusty hair styling buddy? We’ve all been there – midway through blow-drying our luscious locks, only for the hair dryer to abruptly cease its powerful gust of air, leaving us in a state of perplexed disappointment. Fear not, for we are here to assist you in overcoming this ordeal. In the quest for effortlessly flowing tresses, we explore the potential causes behind this exasperating issue.

Picture this: you’re engrossed in the routine of grooming while the hair dryer spontaneously shuts down, like the curtain closing on a poorly timed act. It may seem like an insurmountable hurdle, but in reality, the solution might be within your grasp. There could be various factors at play, lurking behind the scenes like mischievous gremlins, eager to disrupt your beauty routine. Our journey to uncover these culprits and rescue your hair dryer from the abyss begins now.

As you embark on this quest to reclaim the uninterrupted airflow that your hair deserves, keep in mind the pivotal role of preventive measures. Just as we armor ourselves against the chills of winter with cozy layers, your hair dryer too requires a protective shield. It’s time to don your metaphorical cape and delve into the realm of troubleshooting techniques. Discover the key steps to identify the underlying issues plaguing your hair dryer, allowing you to bid farewell to unexpected shutdowns once and for all. Brace yourself as we embark on this hair-raising adventure.

Identifying the Issue

When your hair styling apparatus unexpectedly ceases working in the midst of operation, it is imperative to ascertain the root cause of the problem in order to rectify the malfunction effectively. By detecting and comprehending the underlying issue preventing the proper functioning of your hair dryer, you will be able to embark on the appropriate course of action to restore its optimal functionality.

1. Electrical malfunction: One potential reason for the sudden shutdown of your hair dryer may be an electrical malfunction. This might occur as a result of damaged wiring, a faulty power cord, or an issue with the motor. To identify if an electrical malfunction is responsible for the cessation of operations, it is recommended to inspect the power cord, examine the plug for any signs of wear or damage, and test the power outlet using a different electrical device to ensure its proper functionality.

2. Overheating: Another plausible cause that can lead to the shutting off of your hair dryer during usage is overheating. Excessive heat can cause the safety feature within the appliance to activate, shutting down the device as a precautionary measure. This typically occurs when the hair dryer is being operated for an extended period of time or with insufficient ventilation. Verify if the air vents are clean and free from any blockages that could impede proper airflow, leading to overheating.

3. Faulty thermal fuse: A faulty thermal fuse could also be the cause of the consistent interruptions in your hair dryer’s operation. The thermal fuse is a protective component that automatically shuts off the appliance if it detects overheating. Inspect and test the thermal fuse to determine if it is functioning properly and replace it if necessary.

4. Motor issues: The motor is an essential component of the hair dryer, and if it encounters any issues, it can result in continual shutdowns during use. Monitor the motor’s performance for any irregular sounds or signs of malfunction. Additionally, check for any accumulation of debris around the motor that could hinder its proper functioning.

By diligently examining these potential causes and implementing the appropriate solutions, you can successfully identify the issue that is causing your hair dryer to shut off unexpectedly and resolve the problem effectively.

Check the Power Supply

Ensure that the electrical connection to your hair dryer is functioning properly by examining the power supply. It is important to verify that the electrical current is being supplied consistently and without interruptions. A disruption in the power supply can cause the hair dryer to shut off unexpectedly during use.

Outlet: Begin by checking the outlet where you plug in your hair dryer. Verify that the outlet is providing a stable and reliable source of power. Sometimes, the outlet may be loose or damaged, causing intermittent power loss. Consider trying a different outlet to eliminate this possibility.

Power cord: Examine the power cord of your hair dryer for any signs of damage or fraying. A worn-out or damaged power cord can cause intermittent disconnection of the power supply, resulting in the hair dryer shutting off. If you notice any damage, it is crucial to replace the power cord to ensure safe and uninterrupted operation.

Plug connection: Check the plug connection between the power cord and the hair dryer. Make sure the plug is securely inserted into the hair dryer’s socket and that there are no loose connections. If the plug is loose or damaged, it can lead to power disruptions and automatic shut-off. Consider replacing the plug if necessary.

Circuit breaker: If the power supply to your hair dryer keeps shutting off, it is worth checking the circuit breaker in your electrical panel. A tripped circuit breaker can interrupt the power supply and cause the hair dryer to turn off. Locate the breaker that corresponds to the outlet you are using and reset it if necessary.

Power surge: Power surges can also cause hair dryers to shut off suddenly. Consider using a surge protector or power conditioner to regulate the electrical current and protect your hair dryer during voltage fluctuations. This can help prevent unexpected shut-offs and increase the lifespan of your hair dryer.

By thoroughly examining the power supply of your hair dryer, you can identify any issues that may be causing it to shut off during use. Addressing these power-related problems can help ensure uninterrupted hair drying sessions and prolong the lifespan of your hair dryer.

Ensure the Plug is Secure

One of the common reasons why a hair dryer may unexpectedly shut off during use is due to a loose or unstable plug connection. To ensure uninterrupted operation, it is important to ensure the plug is securely inserted into the power outlet.

Start by checking if the plug is tightly inserted into the socket. Gently wiggle it to verify that it is securely fastened. If the plug feels loose or moves easily, try plugging it into a different outlet to see if the issue persists. It is also advised to check the condition of the plug. Look for any signs of wear or damage, such as frayed wires or bent prongs. If the plug appears damaged, it should be replaced to avoid potential electrical hazards.

In addition to the plug connection, it is important to consider the power capacity of the outlet being used. Hair dryers typically require a considerable amount of power, so using the appliance on a shared circuit with other high-power devices may cause it to shut off. If this is the case, try plugging the hair dryer into a different outlet that is on a separate circuit.

Regularly inspecting and ensuring the plug connection is secure can help prevent unexpected shutdowns during use. Taking these simple steps can help maintain the proper functioning of your hair dryer for efficient and uninterrupted drying sessions.

Test the Power Outlet

Before proceeding with any other troubleshooting steps, it is important to first determine if the issue lies with the power outlet. Testing the power outlet will help you identify whether the problem is with the hair dryer or the electrical supply.

Begin by unplugging the hair dryer from the current power outlet and visually inspecting the plug and cord for any signs of damage or wear. Ensure that the plug is securely inserted into the outlet and that there are no loose connections.

Next, find another electrical device that you know is functioning properly and plug it into the same outlet. If the second device fails to power on or experiences any issues, it indicates that there may be a problem with the power outlet itself.

In such cases, it is recommended to try plugging the hair dryer into a different power outlet. If the hair dryer works properly in a different outlet, it confirms that the previous power outlet is indeed the source of the problem. However, if the hair dryer still shuts off or experiences issues, it suggests that the problem lies within the hair dryer itself.

Remember to always exercise caution when dealing with electrical devices and power outlets. If you are unsure about the safety or functionality of a power outlet, it is advisable to seek professional assistance to avoid any potential hazards or accidents.

In conclusion, testing the power outlet is a crucial first step in troubleshooting a hair dryer that shuts off during use. By ensuring that the power outlet is in proper working condition, you can narrow down the possible causes of the issue and proceed with further troubleshooting steps effectively.

Examine the Cord

Inspecting the cord of a hair dryer can be an essential step in troubleshooting and fixing common issues that may cause it to shut off unexpectedly during use. The cord is a vital component that connects the hair dryer to the power source, allowing it to function effectively. Without a well-functioning cord, the hair dryer may experience intermittent power disruptions or completely shut off. In this section, we will explore the importance of examining the cord and how to identify potential problems.

Check for visible damages: Begin by carefully examining the cord for any visible damages or signs of wear and tear. Look out for frayed or exposed wires, nicks, cuts, or melting. These issues can occur due to regular use, accidental mishandling, or poor storage practices. The presence of such damages can disrupt the flow of electricity and result in the hair dryer shutting off abruptly during use.

Inspect the plug: The plug, which connects the cord to the power outlet, is another crucial area to inspect. Ensure that the plug is securely attached to the cord and there are no loose connections. Additionally, check for any bending or kinks in the plug, as these can affect the proper transmission of electricity. If you notice any issues with the plug, it may need to be replaced or repaired to ensure a reliable power supply.

Examine the cable strain relief: The cable strain relief is the component that secures the cord to the hair dryer. It helps to protect the cord from excessive pulling or twisting, which can damage the internal wires. Inspect the strain relief for any signs of damage, such as cracks or detachment. If the strain relief is compromised, it can lead to electrical problems and cause the hair dryer to shut off unexpectedly.

Consider the length and flexibility: While examining the cord, take note of its length and flexibility. Depending on the model and manufacturer, hair dryers can have cords of varying lengths. Ensure that the cord is long enough to provide comfortable usage without strain or tension. Additionally, a flexible cord allows for easy maneuverability and prevents tangling or twisting, reducing the risk of damage to the internal wiring.

Consult a professional: If you are unable to identify any visible problems with the cord or if the hair dryer continues to shut off despite thorough inspection, it may be necessary to seek assistance from a professional technician. They can further diagnose the issue and provide appropriate solutions to repair or replace the cord, ensuring the safe and uninterrupted operation of your hair dryer.

Look for Frayed Wires

One potential cause of a hair dryer consistently shutting off during use is the presence of frayed wires. Frayed wires refer to damaged or worn-out electrical wires that can disrupt the proper functioning of the hair dryer. It is important to regularly inspect the wires of your hair dryer to ensure their integrity and prevent any potential electrical hazards.

To check for frayed wires, first, unplug the hair dryer from the power source. Examine the entire length of the power cord for any visible signs of damage, such as exposed wires, cuts, or kinks. Pay attention to areas near the plug and the base of the hair dryer, as these are common areas where fraying may occur.

If you notice any frayed wires, it is crucial to address the issue promptly. Continuing to use a hair dryer with frayed wires can increase the risk of electrical shocks or fires. Depending on the severity of the damage, there are a few possible solutions for fixing frayed wires.

By regularly checking for frayed wires and promptly addressing any issues, you can extend the lifespan of your hair dryer and ensure safer usage. Remember, if you are uncomfortable with performing any repairs yourself, it is always best to consult a professional.

Check for Loose Connections

In this section, we will discuss the importance of checking for loose connections in your hair dryer. Ensuring that all connections are secure is crucial for the proper functioning of the device. Loose connections can lead to interruptions in the power supply, resulting in the hair dryer shutting off unexpectedly during use. By identifying and fixing any loose connections, you can prevent these issues and ensure a smooth and uninterrupted drying experience.

To begin, carefully examine the power cord of your hair dryer. Check for any visible signs of wear or fraying, as these can indicate a loose connection. It is important to remember that a damaged power cord should always be replaced to avoid any safety hazards. Additionally, inspect the area where the power cord connects to the hair dryer itself. Ensure that the plug is firmly inserted into the socket and that there are no signs of looseness or instability.

Next, move on to inspecting the control switches of the hair dryer. Loose connections can occur at the switch points, leading to intermittent power supply issues. Gently toggle the switches back and forth to check for any looseness or abnormal movements. If you observe any irregularities, it may be necessary to disassemble the hair dryer and tighten the connections at the switch points. Be sure to refer to the manufacturer’s instructions or seek professional assistance if needed.

By routinely checking for loose connections in your hair dryer, you can maintain its functionality and prolong its lifespan. Remember to always prioritize safety and follow proper instructions when handling electrical devices.

Checking the Thermal Cutoff

When your hair dryer unexpectedly shuts off while in use, it can be quite frustrating. One possible cause for this issue is a faulty thermal cutoff. The thermal cutoff is a safety mechanism designed to prevent the hair dryer from overheating and causing potential hazards. In this section, we will guide you through the process of checking the thermal cutoff to determine if it is the cause of the problem.

Locate the Thermal Cutoff

In order to identify the thermal cutoff component in your malfunctioning hair dryer, it is essential to understand its purpose and location. The thermal cutoff is a safety feature designed to protect the dryer from overheating and potential damage. It acts as a switch that automatically shuts off the hair dryer if it reaches a certain temperature. By locating the thermal cutoff, you can effectively diagnose and resolve the issue causing the hair dryer to shut off during use.

Once you have successfully located the thermal cutoff, you can proceed with further troubleshooting or replacement if necessary. It is essential to handle the thermal cutoff with care and follow any safety precautions mentioned in the user manual or provided by the manufacturer. Remember to only attempt repairs if you have the necessary knowledge and skills, or consult a professional for assistance.

Access the Hair Dryer Housing

In order to address the issue of a hair dryer shutting off unexpectedly during use, it is essential to gain access to the housing of the device. By accessing the housing, you will be able to inspect its components and identify potential causes of the problem. Here are the steps to access the hair dryer housing:

1. Unplug the hair dryer: Before beginning any maintenance or repair work, ensure that the hair dryer is disconnected from its power source to prevent any accidents or injuries.

2. Locate the screws: Examine the hair dryer housing carefully to find the screws that hold it together. These screws are usually located on the back or sides of the device and may be recessed or hidden beneath rubber pads.

3. Remove the screws: Use a suitable screwdriver to carefully remove the screws that secure the housing. Keep track of the screws and place them in a safe location to prevent loss.

4. Separate the housing: Once all the screws have been removed, gently separate the housing by pulling it apart. Take care not to force it open, as it may be connected by additional clips or hooks.

5. Inspect the components: With the housing removed, visually inspect the components inside the hair dryer. Check for any loose connections, damaged wires, or signs of overheating. Pay close attention to the motor, switches, and wiring connections.

6. Clean the interior: While the housing is open, take the opportunity to clean the interior of the hair dryer. Use a soft brush or cloth to remove any dust, debris, or hair that may have accumulated over time. This will help improve the device’s performance and prevent future issues.

7. Reassemble the housing: After completing the inspection and cleaning, carefully reassemble the housing by aligning the parts and securing them with the previously removed screws. Ensure that all components are properly positioned and any clips or hooks are properly engaged.

8. Test the hair dryer: Once the housing is reassembled, plug in the hair dryer and test it to see if the issue of shutting off unexpectedly during use has been resolved. If the problem persists, further troubleshooting or professional assistance may be necessary.

By accessing the hair dryer housing and following these steps, you will be able to investigate and potentially resolve the issue of the hair dryer shutting off during use. Remember to always prioritize safety and consult the manufacturer’s instructions or seek professional help if needed.

Locate the Thermal Cutoff Component

Identifying the thermal cutoff component is an essential step in resolving the issue of a hair dryer that unexpectedly shuts down while being used. This component serves as a safety feature that helps protect the device from overheating, preventing any potential damage or accidents.

To locate the thermal cutoff, begin by unplugging the hair dryer and inspecting its exterior. Look for any visible openings or vents that allow air circulation. The thermal cutoff is typically located near these areas, as its main function is to monitor and regulate the device’s temperature.

While it may vary depending on the hair dryer model, the thermal cutoff is often a small rectangular-shaped component that can be identified by its distinct appearance. It is usually made of metal and may have wires connected to it. Take note of its position and carefully examine it for any signs of damage or disconnection.

Caution: Before proceeding with any further steps, it is important to emphasize the significance of safety precautions. Never attempt to handle any internal components of a hair dryer while it is plugged in or connected to a power source. Always disconnect the device from the power supply before inspecting or repairing any parts.

Repairing the Thermal Cutoff

In order to restore functionality to your hair dryer when it unexpectedly turns off, it is important to address the issue with the thermal cutoff component. The thermal cutoff serves as a safety feature that automatically shuts off the appliance when it detects overheating, protecting it from potential damage or fire hazards.

To repair the thermal cutoff, you will need to follow a few steps. Before beginning any repairs, be sure to disconnect the hair dryer from the power source to ensure your safety.

Remember to prioritize your safety throughout the repair process. If you are uncertain or uncomfortable with any step, it is always recommended to seek assistance from a qualified technician.

Test for Continuity

In order to diagnose and fix a hair dryer that unexpectedly turns off while in use, one valuable test to perform is the continuity test. This test allows you to check the flow of electrical current through the different components of the hair dryer, ensuring that there are no interruptions or faults that may be causing the issue.

Continuity refers to the ability of an electrical circuit to conduct current without any breaks or interruptions. By conducting a continuity test, you can determine if there is a complete and unobstructed path for electricity to flow in your hair dryer. This is crucial in identifying any potential problems that could lead to the device shutting off, such as a broken wire, loose connection, or a faulty switch.

To perform the continuity test, you will need a multimeter, a versatile instrument used for measuring various electrical properties. Set the multimeter to the continuity or resistance mode, indicated by the symbol of a speaker or ohm. Make sure the hair dryer is unplugged and disassembled before proceeding.

First, identify the specific components that you want to test for continuity. This may include the power cord, the heating element, the motor, and any switches or controls. Then, carefully touch the black (negative) probe of the multimeter to one end of the component being tested, and the red (positive) probe to the other end. If the multimeter produces a reading close to zero or beeps, it indicates that there is continuity and the electrical circuit is functioning properly. However, if the multimeter does not show any reading or remains silent, it suggests an interruption in the flow of electricity and further investigation is needed.

If you discover any faulty components during the continuity test, you can try repairing or replacing them to fix the issue. Broken wires can be soldered or replaced, loose connections can be tightened, and faulty switches may need to be replaced entirely. By identifying and addressing these potential causes of the hair dryer shutting off, you can hopefully resolve the problem and avoid any further interruptions during use.

Use a Multimeter

When faced with a hair dryer that unexpectedly shuts down while you are using it, employing a multimeter can prove to be a vital step towards identifying and resolving the underlying issue. This versatile electronic testing device allows you to measure various electrical parameters, such as voltage, current, and resistance. By using a multimeter, you can systematically troubleshoot the faulty components of your hair dryer and determine the root cause of its shutdown during use.

Before utilizing a multimeter to diagnose the problem with your hair dryer, ensure that it is disconnected from its power source and is completely turned off. This precautionary step ensures your safety and prevents any further damage to the appliance.

One of the common causes of a hair dryer shutting off during use is a defective power cord. Using the multimeter’s resistance function, you can assess if the power cord has any breaks or inconsistencies in its wiring. By carefully measuring the resistance values of different segments of the power cord, you can pinpoint any areas of concern that may be causing the shutdown issue.

In addition to the power cord, the heating element is another vital component that is prone to failure in a hair dryer. By setting the multimeter to measure resistance, you can check if the heating element has continuity or if it is damaged. If the multimeter shows an infinite resistance reading, it indicates a broken heating element that requires replacement.

Furthermore, the motor of the hair dryer can also be a culprit behind the shutdown problem. Using the multimeter’s current measurement function, you can evaluate the current drawn by the motor during operation. Any unusually high or low current readings may indicate motor issues that require further examination or professional assistance.

In conclusion, utilizing a multimeter can significantly aid in the troubleshooting process of a hair dryer that shuts off during use. By accurately measuring electrical parameters and assessing the condition of crucial components such as the power cord, heating element, and motor, you can effectively diagnose and resolve the problem, restoring your hair dryer’s functionality.

Check for an Open Circuit

Inspecting the electrical circuit of your hair dryer is essential when troubleshooting the issue of it shutting off during use. An open circuit refers to a break or interruption in the flow of electricity, which can cause the dryer to unexpectedly turn off. By checking for an open circuit, you can identify and resolve any electrical connectivity issues that may be causing the problem.

To begin, ensure that the hair dryer is unplugged from the power source to avoid any risk of electric shock. Examine the power cord for any visible signs of damage, such as fraying or exposed wires. Any such damage can result in an open circuit and should be addressed immediately. If the power cord appears to be in good condition, proceed to check the connections between the power cord and the dryer’s components.

Using a multimeter, set it to the continuity or resistance mode, depending on the specific model of your multimeter. Start by testing the continuity of the power cord by placing one probe on the plug’s prongs and the other probe on the corresponding terminals of the dryer. A reading of infinite resistance or no continuity indicates an open circuit, necessitating a replacement of the power cord.

Next, examine the connections between the power cord and the dryer’s components, such as the switches and motor. Detach the dryer’s housing to gain access to the internal components. Carefully inspect the terminals and wiring for any loose or disconnected connections. Reconnect any loose wires and tighten any loose terminals to ensure proper electrical conductivity.

If you have checked the power cord and the connections but still experience the issue of the hair dryer shutting off during use, it may be necessary to consult a professional technician or consider replacing the appliance. Remember to always prioritize your safety and avoid working on live electrical components unless you have the necessary skills and knowledge.

Replacing the Thermal Cutoff

In this section, we will discuss the necessary steps to replace the thermal cutoff component of your hair dryer. The thermal cutoff is responsible for monitoring and controlling the temperature of the device to ensure safe operation. Over time, this component may become faulty or worn out, causing the hair dryer to shut off unexpectedly during use. By replacing the thermal cutoff, you can restore proper functionality to your hair dryer and prevent further interruptions.

Step 1: Before beginning the replacement process, make sure to unplug the hair dryer from the power source and allow it to cool down completely. This will ensure your safety and prevent any potential damage to the device.

Step 2: Locate the thermal cutoff component on your hair dryer. It is typically a small round device that is often located near the heating element or motor. Carefully inspect the area to identify the exact location of the thermal cutoff.

Step 3: Once you have identified the thermal cutoff, use a screwdriver or other appropriate tools to remove any screws or fasteners that are holding it in place. Keep track of these screws to make reassembly easier later on.

Step 4: Gently disconnect any wires or connectors attached to the thermal cutoff. Take note of their positions and make sure to reconnect them correctly when installing the new thermal cutoff.

Step 5: Take your new thermal cutoff component and align it with the original position. Secure it in place by fastening the screws or clips that were removed earlier.

Step 6: Carefully reconnect the wires or connectors to the new thermal cutoff, ensuring that they are securely attached and properly aligned.

Step 7: Double-check all the connections and make sure everything is in place. Once you are confident that the thermal cutoff has been installed correctly, you can proceed with reassembling the remaining parts of the hair dryer.

Note: If you are unsure about any step or encounter any difficulties during the replacement process, it is recommended to consult the manufacturer’s manual or seek assistance from a professional technician.

By following these steps, you can replace the thermal cutoff in your hair dryer and resolve the issue of it shutting off during use. It is important to take caution and ensure proper installation to guarantee the safe and efficient operation of your hair dryer.

Purchase a Replacement Thermal Cutoff

When faced with the issue of a hair dryer that suddenly stops working during use, one possible solution is to consider purchasing a replacement thermal cutoff. This component, also known as a thermal fuse, plays a crucial role in preventing the hair dryer from overheating and potentially causing a fire hazard.

By purchasing a replacement thermal cutoff, you can ensure that your hair dryer functions safely and efficiently. When the hair dryer exceeds a certain temperature, the thermal cutoff activates and interrupts the flow of electricity, effectively shutting off the device. This protective mechanism is essential for avoiding potential safety hazards and prolonging the lifespan of your hair dryer.

When looking for a replacement thermal cutoff, it is important to find a compatible one that matches the specifications of your specific hair dryer model. This can be achieved by checking the user manual or contacting the manufacturer for guidance. Additionally, it is recommended to purchase the thermal cutoff from a reputable supplier to ensure its quality and reliability.

Installing the replacement thermal cutoff requires some technical knowledge and expertise. When undertaking this task, it is crucial to unplug the hair dryer and follow the instructions provided by the manufacturer to ensure proper installation. If you are uncertain about performing the replacement yourself, it is advisable to seek professional assistance.

Remember, a functioning thermal cutoff is essential for the safe operation of your hair dryer. By purchasing a replacement thermal cutoff and following the necessary installation steps, you can ensure that your hair dryer continues to provide efficient and safe drying experiences for years to come.

Identify the Correct Model

When it comes to troubleshooting your hair dryer, one of the first important steps is to identify the correct model. Different hair dryers may have varying designs, components, and mechanisms that can cause them to shut off unexpectedly during use. By correctly identifying the model, you can gather the necessary information and resources to effectively diagnose and address the issue.

Start by locating the model number of your hair dryer. This information is usually imprinted on the handle or the back of the device. If you cannot find the model number, refer to the user manual or the original packaging. Once you have identified the model, consult the corresponding table above to understand the distinctive features of your hair dryer.

By familiarizing yourself with the unique attributes of your hair dryer, you can narrow down the potential causes of the unexpected shutdown. It is worth noting that certain models may have specific troubleshooting steps or known issues related to their design. Searching for the model online or checking the manufacturer’s website for any updates or common problems can provide valuable insights.

In addition, identifying the correct model is crucial if you need to purchase replacement parts or seek professional assistance. Different models may require specific components that are not compatible with others. Knowing your hair dryer model allows you to find the appropriate replacement parts or consult with experts who specialize in repairing that particular model.

In conclusion, identifying the correct model of your hair dryer is an essential first step in troubleshooting and addressing unexpected shutdown issues. It enables you to gather relevant information, understand the distinctive features, and locate appropriate resources for resolving the problem effectively.

• Tags:
• hair
• dryer
• power
• thermal
• cord
• cutoff
• shut
• issue
• ensure
• component