Tips and Tricks for Fixing a Washing Machine That Fails to Spin or Agitate

Seeking assistance when a washing machine fails to perform its essential functions of spinning and agitating can save you from the inconvenience of manually washing clothes or the expense of replacing the entire machine. In this article, we will explore troubleshooting techniques and repair advice to resolve these common issues. Understanding the underlying causes and implementing appropriate solutions will help you restore your machine’s optimal performance.

When a washing machine fails to spin, it typically indicates a problem with the motor, belt, or transmission. By identifying the source of the issue, you can take targeted measures to rectify the problem. Additionally, if your machine does not agitate properly, it is likely due to a malfunctioning drive belt, worn-out agitator dogs, or a faulty agitator assembly. Recognizing these potential causes will enable you to take necessary steps to fix the problem and get your machine back to its full functionality.

While troubleshooting and repairing your washing machine, it is crucial to exercise caution and prioritize safety. Remember to unplug the machine before commencing any maintenance procedures and consult the manufacturer’s manual for specific instructions pertaining to your model. By following these guidelines, you can avoid accidents and ensure a successful repair process. Now, let’s delve into various troubleshooting methods and repair tips to address your washing machine’s spin and agitation issues effectively!

Common Causes

When your washing machine is experiencing issues with spinning or agitating, there are several common causes that could be at play. Understanding these underlying causes can help you troubleshoot and address the problem effectively.

Inadequate Power Supply: One of the reasons your washing machine may not be spinning or agitating properly is due to an inadequate power supply. This could be caused by a problem with the electrical outlet, a tripped circuit breaker, or a faulty power cord. Ensuring that your washing machine is receiving sufficient power is essential in resolving this issue.

Malfunctioning Motor: A malfunctioning motor can also prevent your washing machine from spinning or agitating. This could be due to various reasons such as a worn-out motor belt, a faulty motor capacitor, or a defective motor itself. Checking the motor components and replacing any faulty parts can help resolve this issue.

Blocked or Damaged Drain Pump: A clogged or damaged drain pump can affect the spinning and agitating functionality of your washing machine. Accumulated debris, such as lint or foreign objects, can obstruct the pump’s operation. Regularly inspecting and cleaning the drain pump, as well as removing any blockages, is crucial to ensure proper functioning.

Malfunctioning Door or Lid Switch: If the door or lid switch of your washing machine is malfunctioning, it can prevent the machine from spinning or agitating. This safety feature is designed to stop the machine’s operation when the door or lid is open. Checking the switch for any damage or faulty connections and replacing it if necessary can resolve this issue.

Worn-out Drive Belt: A worn-out drive belt can result in the washing machine not spinning or agitating properly. Over time, the belt can become stretched or frayed, causing a loss of tension. Inspecting the drive belt regularly and replacing it when worn out can help restore the proper functioning of your washing machine.

Defective Timer or Control Board: A defective timer or control board can also be a possible cause of your washing machine’s spinning or agitating problems. These components control the various cycles and operations of the machine. If they are not functioning correctly, it can disrupt the spinning and agitating functions. Professional repair or replacement of the timer or control board may be necessary to resolve this issue.

By identifying these common causes and addressing them promptly, you can save time and money on repairs and ensure your washing machine operates smoothly.

Lid Switch

The lid switch is an essential component of a washing machine that plays a crucial role in its operation. It is responsible for detecting whether the lid is closed or open during the different cycles of the machine. Without a functioning lid switch, the washing machine may not spin or agitate properly, resulting in ineffective cleaning and rinsing of clothes.

When the lid switch malfunctions, it can prevent the washing machine from starting or completing its cycles. This can be frustrating for users as it disrupts the normal functioning of the appliance and affects its overall performance. Therefore, understanding the lid switch and troubleshooting any issues related to it is important for maintaining a properly functioning washing machine.

If your washing machine fails to spin or agitate, it is crucial to investigate the lid switch as a potential cause. Start by checking if the switch is properly connected and secured. Ensure that there are no loose or damaged wires that could be interfering with its operation. Additionally, inspect the lid itself to ensure it is closing properly and activating the switch when necessary.

Testing the lid switch can be done using a multimeter to check for continuity. This simple test can help determine if the lid switch is faulty and needs to be replaced. If the switch fails the continuity test, it is advisable to consult the appliance’s manual or contact a professional technician for further assistance in replacing the lid switch.

Regular maintenance and cleaning of the lid switch are also recommended to prevent any unwanted issues. Keeping the switch clean and free from debris can help ensure its proper functioning and extend its lifespan.

Overall, the lid switch is an important component that affects the spinning and agitation functions of a washing machine. Troubleshooting any issues related to the lid switch is essential for maintaining the optimal performance of your appliance and ensuring effective cleaning of your clothes.

Motor Coupling

In the realm of appliance repairs, there exists a vital component that plays a crucial role in the functioning of a washing machine. This component, known as the motor coupling, serves as a crucial link between the motor and the transmission. Without the proper functioning of the motor coupling, the washing machine may fail to spin or agitate effectively. Understanding the importance of the motor coupling and its potential issues is essential for troubleshooting and resolving washing machine problems.

When faced with a washing machine that refuses to spin or agitate, one potential culprit worth investigating is the motor coupling. The motor coupling acts as a connection point for the motor and the transmission, allowing for the transfer of power and rotational force. However, over time, the motor coupling can wear down or become damaged, resulting in a loss of efficient power transfer. This can lead to the washing machine’s inability to perform its primary functions.

An easy way to determine if the motor coupling is the cause of a non-spinning or non-agitating washing machine is to conduct a visual inspection. In some cases, a worn or broken motor coupling may exhibit visible signs such as cracks or fraying. Additionally, if the motor coupling appears to be loose or disconnected, it is a clear indication that it requires replacement. However, it is worth noting that some motor coupling issues may not be visually apparent, requiring further testing and examination.

To perform a more in-depth assessment of the motor coupling, certain diagnostic procedures can be undertaken. First and foremost, it is crucial to disconnect the washing machine from its power source to ensure safety. Once disconnected, the motor coupling can be accessed by removing the outer cabinet or back panel of the washing machine, depending on the model. Careful examination for any signs of damage or wear can be conducted at this point.

• If the motor coupling appears intact visually but is suspected to be faulty, an additional test can be performed using a multimeter. By checking for continuity between the motor coupling’s terminals, it is possible to determine if it is functioning correctly.
• Additionally, a physical test can be carried out by manually attempting to rotate the motor coupling. If the coupling is easily rotated or exhibits excessive play, it is an indication that it needs replacement.

In conclusion, the motor coupling serves as a critical component in the functioning of a washing machine, facilitating the transfer of power between the motor and transmission. Identifying and addressing any motor coupling issues can help troubleshoot and resolve washing machine problems related to spinning and agitating. Whether through visual inspection or diagnostic tests, understanding the role and potential issues associated with the motor coupling is essential for an effective repair process.

Diagnosis

In order to effectively troubleshoot and solve issues with your washing machine’s spinning or agitating functions, it is essential to first understand the root cause of the problem. This section provides a comprehensive guide to diagnosing the underlying issues that may be preventing your machine from spinning or agitating correctly.

By following the step-by-step diagnosis process outlined below, you will be able to identify the specific components or mechanisms responsible for the malfunction, allowing you to take appropriate action to rectify the problem.

Step 1: Visual Inspection

Begin the diagnosis process by conducting a thorough visual inspection of your washing machine. Look for any obvious signs of damage or wear, such as frayed belts, loose connections, or broken parts. Pay attention to the motor, drive belt, agitator, and other relevant components.

Step 2: Testing Power Supply

Next, verify that your washing machine is receiving adequate power supply. Check the power cord and ensure it is firmly connected to a functioning electrical outlet. Use a multimeter to test the voltage and continuity of the power supply to the machine. A faulty power supply can prevent the machine from spinning or agitating.

Step 3: Inspecting the Drive Belt

The drive belt is responsible for transferring power from the motor to the drum or agitator. Inspect the drive belt for signs of damage or wear. If the belt appears loose, frayed, or broken, it may need to be replaced. A faulty or worn drive belt can result in a washing machine that fails to spin or agitate properly.

Step 4: Checking the Motor

The motor is a critical component in the spinning and agitating operations of a washing machine. Test the motor to ensure it is functioning correctly. Use a multimeter to measure the continuity and resistance of the motor’s windings. If the motor fails these tests, it may need to be repaired or replaced.

Step 5: Examining the Lid Switch

Many washing machines are equipped with a lid switch that prevents the machine from spinning or agitating when the lid is open. Inspect the lid switch for any visible signs of damage or misalignment. Use a multimeter to test the continuity of the switch. A faulty or malfunctioning lid switch can cause issues with the spinning or agitating functions.

Step 6: Investigating Other Components

If all the previous steps have been completed and the issue remains unresolved, it may be necessary to further investigate other components such as the control board, motor coupler, or transmission. Consult the manufacturer’s manual or seek professional assistance at this stage to diagnose and repair these more complex components.

By methodically diagnosing the underlying problems through these steps, you will gain a clearer understanding of the issues preventing your washing machine from spinning or agitating. This knowledge will enable you to take the appropriate measures to fix the problem, whether through repairs or part replacements.

Check for Power

Ensuring that your washing machine is receiving proper power is essential in troubleshooting and solving issues related to spinning or agitating. Before proceeding with any repairs or further troubleshooting steps, it is important to first check if the machine is getting adequate power supply.

Start by checking if the washing machine is plugged into a functioning power outlet. Inspect the power cord for any visible damages or frayed wires, as this could be a potential cause for power failure. If the power cord appears damaged, it may need to be replaced to restore proper power supply.

If the power cord is intact, you should also check if the circuit breaker or fuse connected to the washing machine’s power source is tripped or blown out. A tripped breaker or blown fuse can disrupt the power supply, preventing the machine from functioning properly. If this is the case, reset the breaker or replace the fuse accordingly to restore power.

Another important aspect to consider is the presence of a power outage in your area. Verify if other electrical appliances or devices in your home are functioning properly. If there is a power outage, you will need to wait until power is restored before troubleshooting the washing machine further.

It is also worth checking the voltage supply to your washing machine. Ensure that the power outlet is providing the correct voltage (usually 120 volts in most residential areas) as specified by the manufacturer. Using an electrical tester or multimeter, you can measure the voltage to confirm if it is within the recommended range. If the voltage is significantly lower or higher than the specified range, it may indicate an electrical issue that needs to be addressed.

In conclusion, checking for power is the first step in troubleshooting a washing machine that is not spinning or agitating. By ensuring proper power supply, you can eliminate power-related issues and proceed with further troubleshooting or repairs if necessary.

Inspect the Motor

Examine the motor of your washing machine to identify potential issues that may be causing it to not spin or agitate properly. By inspecting the motor, you can determine if it is functioning correctly or if it requires further attention.

Start by checking for any visible signs of damage or wear on the motor. Look for frayed or disconnected wires, burnt-out components, or any other indicators of electrical issues. Additionally, ensure that the motor is securely mounted in place and that all connections are tight and secure.

If there are no visible signs of damage, you can proceed to test the motor using a multimeter. Set the multimeter to the resistance or continuity setting and place the probes on the motor’s terminals. A reading within the expected range indicates that the motor is functioning properly, while a reading outside the range may indicate a faulty motor that needs to be replaced.

Another aspect to consider is the motor’s capacitor. Capacitors store electrical energy and provide power to the motor during startup. If the capacitor is defective or worn out, it can prevent the motor from spinning or agitating. Inspect the capacitor for any signs of damage, such as bulging or leaking. If you suspect a faulty capacitor, it is advisable to consult a professional for replacement or further troubleshooting.

Remember to always disconnect the power supply to the washing machine before inspecting or working on the motor. Safety should be a top priority to avoid any accidents or injuries. If you are unsure about inspecting the motor yourself, it is recommended to seek professional assistance.

Repair Steps

Once you have identified that your washing machine is not spinning or agitating, it is important to take a systematic approach to troubleshoot and repair the issue. The following steps outline the recommended repair process:

1. Check the power supply: Ensure that the washing machine is properly plugged in and that there is no issue with the power outlet. Make sure the circuit breaker or fuse is not tripped.
2. Inspect the lid switch: Examine the lid switch to determine if it is functioning correctly. If the switch is faulty, the machine may not spin or agitate. Consider replacing the lid switch if necessary.
3. Examine the drive belt: Inspect the drive belt to assess if it is worn, damaged, or loose. A faulty drive belt can prevent the machine from spinning or agitating. Replace the belt if needed.
4. Check the motor coupling: The motor coupling connects the motor to the transmission. If it is broken or worn out, the machine will not spin or agitate. Inspect the motor coupling and replace it if necessary.
5. Inspect the motor: Examine the motor to determine if it is functioning correctly. A malfunctioning motor can be the cause of the problem. Consider testing the motor and replacing it if required.
6. Check the clutch assembly: The clutch assembly allows the machine to transition between different cycles. If it is damaged or worn out, the machine may not spin or agitate. Inspect the clutch assembly and replace it if needed.
7. Examine the transmission: The transmission is responsible for the spinning and agitating functions of the washing machine. If it is faulty, the machine will not perform these actions. Consider inspecting and replacing the transmission if necessary.
8. Verify the control board: The control board controls the various functions of the washing machine. If it is defective, the machine may not spin or agitate. Check the control board and replace it if required.
9. Seek professional assistance: If you have followed these steps and are still unable to resolve the issue, it may be necessary to contact a professional appliance repair technician. They will have the expertise to diagnose and repair the problem.

By following these repair steps, you can effectively troubleshoot and address a washing machine that is not spinning or agitating. Remember to prioritize safety and consult the appliance’s manual or manufacturer for specific instructions related to your model.

Replace the Lid Switch

In this section, we will discuss the importance of replacing the lid switch in a washing machine that is not spinning or agitating. The lid switch plays a crucial role in the proper functioning of the machine, as it ensures that the lid is securely closed before the cycle can begin. If the lid switch is faulty, it can prevent the machine from starting or completing the spin or agitation cycles.

One of the commonly observed symptoms of a defective lid switch is that the machine will not spin or agitate at all. This can be frustrating as it leads to clothes remaining wet or the cycle not progressing properly. By replacing the lid switch, you can address this issue and restore the normal operation of your washing machine.

Before replacing the lid switch, it is important to make sure that it is indeed the cause of the problem. You can do this by conducting a simple test. Open the lid of the machine and locate the lid switch, which is usually in the front or top of the machine. Use a multimeter to test the continuity of the switch by checking for a reading when the lid is closed and no reading when it is open. If there is no continuity, it indicates a faulty lid switch that needs to be replaced.

Once you have determined that the lid switch needs to be replaced, you can proceed with the replacement process. Start by disconnecting the power supply to the machine to ensure safety. Access the lid switch by removing the control panel or opening the top or back of the machine, depending on the model. Disconnect the wires and remove the old lid switch from its position.

Install the new lid switch by positioning it in the same location as the old one and reconnecting the wires. Make sure to secure the switch properly to prevent any loose connections. Once the new switch is in place, reassemble the machine and restore the power supply. Test the machine to ensure that the lid switch replacement has resolved the issue, and the machine is now spinning and agitating as expected.

Replacing the lid switch can be a relatively simple and cost-effective solution to fix a washing machine that is not spinning or agitating. By following the steps outlined in this section, you can successfully replace the lid switch and restore the full functionality of your washing machine.

Install a New Motor Coupling

In this section, we will explore the process of installing a new motor coupling in your washing machine. The motor coupling plays a crucial role in the spinning and agitating functions of the machine. If your washing machine is not spinning or agitating properly, replacing the motor coupling may solve the issue.

Step 1: Begin by unplugging the washing machine and turning off the water supply. It is important to work on a machine that has no power to avoid any potential accidents.

Step 2: Locate the motor coupling, which is typically found between the motor and the transmission assembly. It connects the motor to the transmission, allowing them to work together to rotate the agitator and drum.

Step 3: To access the motor coupling, you may need to remove the cabinet or back panel of your washing machine. Refer to the manufacturer’s instructions or consult a service manual for specific guidance.

Step 4: Once the motor coupling is visible, examine it for any signs of damage or wear. Common indicators include cracks, stripped/broken teeth, or a loose connection. If any of these issues are present, it is time to replace the motor coupling.

Step 5: To install the new motor coupling, carefully align it with the motor shaft and the transmission shaft. Make sure it is securely fitted and properly positioned before proceeding.

Step 6: Reassemble the washing machine by following the reverse steps of the disassembly process. Make sure all components are properly secured and tightened.

Step 7: Once the washing machine is reassembled, plug it back in and turn on the water supply. Test the machine to ensure that the new motor coupling has resolved the spinning or agitating issue.

By following these steps and installing a new motor coupling, you can potentially fix a washing machine that is not spinning or agitating properly. If the problem persists, it is recommended to consult a professional technician or contact the manufacturer for further assistance.

Additional Considerations

In addition to the troubleshooting and repair tips discussed previously, there are some additional considerations to keep in mind when dealing with a washing machine that is not spinning or agitating. These considerations can help you further analyze the issue and potentially resolve it without extensive repairs or professional assistance.

Firstly, it is important to check the power supply to the washing machine. Ensure that the power cord is properly connected to a functioning electrical outlet and that there are no issues with the circuit breaker or fuse. A faulty power supply can prevent the machine from spinning or agitating.

Next, inspect the control panel and settings of the washing machine. Make sure that the machine is set to the appropriate cycle and that any relevant options or settings, such as the spin speed or agitator action, are correctly selected. Incorrect settings can cause the machine to not perform these functions properly.

Another consideration is the load size and balance within the machine. Overloading the washing machine can put excessive strain on the motor and prevent it from spinning or agitating. It is important to follow the manufacturer’s guidelines for load capacity and distribute the load evenly within the machine to ensure proper functioning.

Furthermore, excessive suds or detergent residue can also interfere with the spinning and agitating functions of the machine. If you notice excessive suds during the wash cycle or if there is visible residue on the clothes after the cycle, consider reducing the amount of detergent used or using a detergent specifically designed for high-efficiency machines.

Finally, regular maintenance and cleaning of the washing machine can also contribute to its proper functioning. Over time, lint, debris, and mineral deposits can accumulate within the machine, resulting in decreased performance. Periodically cleaning the drum, filters, and other components can help prevent issues with spinning and agitating.

By considering these additional factors, you can increase your chances of identifying and resolving the issue with a washing machine that is not spinning or agitating. Remember to always prioritize safety and consult the manufacturer’s instructions or seek professional assistance if needed.

Check the Belt

One important component to inspect when troubleshooting a washing machine that is not spinning or agitating is the belt. This crucial part is responsible for transferring power from the motor to the drum, enabling the spinning and agitating functions.

Begin by unplugging the washing machine and locating the belt. It is typically located at the bottom of the machine, underneath the drum. Check the belt for signs of wear, such as fraying, cracking, or stretching. A damaged or loose belt can prevent the drum from spinning or agitating properly.

If the belt appears to be in good condition, ensure that it is properly aligned on the pulleys. Over time, the belt may become misaligned and slip off, causing the spin and agitation problems. Adjust the belt if necessary by loosening the motor mounting bolts and shifting the motor until the belt is properly aligned.

In addition to checking the condition and alignment of the belt, inspect the tension of the belt. A loose or worn-out belt might not provide enough tension to effectively transfer power to the drum. If the belt is loose, tighten it by adjusting the tensioning bolt or pulley. If the belt is excessively worn or damaged, it should be replaced with a new one.

Remember, the belt is just one potential cause for a washing machine that won’t spin or agitate. If the belt is in good condition and properly aligned with adequate tension, it may be necessary to investigate other components such as the motor, motor control board, or lid switch.

Test the Capacitor

Assessing the functionality of the capacitor is a vital step in troubleshooting and resolving issues with a washing machine that fails to spin or agitate. The capacitor plays a crucial role in the operation of the motor, providing the necessary jolt of electricity to start the motor’s rotation. By testing the capacitor, you can determine whether it needs replacement or if there are other underlying problems causing the malfunction.

Begin by disconnecting the washing machine from the power source to ensure your safety. Locate the capacitor, which is typically situated near the motor. Pay attention to any visible signs of damage, such as bulging, leaking, or burnt marks. If any such signs are present, it is likely that the capacitor needs to be replaced.

If the multimeter reading does not match the rated capacitance, it indicates a faulty capacitor that needs replacement. However, if the reading is within the acceptable range, it suggests that the capacitor is functioning properly, and you should explore other potential causes for the washing machine’s failure to spin or agitate.

Testing the capacitor is an essential step in the troubleshooting process for a washing machine that lacks spinning or agitating capabilities. By following the steps outlined above, you can determine whether the capacitor is the culprit behind the malfunction and take appropriate action to rectify the issue.

Preventive Maintenance

Regular upkeep and care are essential for maintaining the optimal performance of your washing machine. By following a few simple preventive maintenance practices, you can extend the lifespan of your appliance and minimize the likelihood of issues such as a malfunctioning spin or agitator.

One crucial aspect of preventive maintenance is keeping the machine clean. Regularly wiping down the exterior with a damp cloth can help prevent dust and debris from entering the internal components. Additionally, periodically cleaning the inside of the washing machine, including the drum, filters, and dispensers, will ensure the efficient flow of water and detergent and prevent clogs or buildup.

Another important preventive maintenance step is to avoid overloading the machine. Overloading can strain the motor and other components, leading to poor spinning or agitating performance. Always follow the manufacturer’s guidelines regarding load sizes, and distribute the laundry evenly in the drum to promote balanced rotation.

Checking and maintaining the machine’s hoses and connections is also crucial. Regularly inspecting the hoses for signs of wear, such as cracks or leaks, and replacing them as needed can prevent water leakage and potential damage to the machine. Additionally, ensuring that the inlet and outlet hoses are securely connected and not kinked or blocked will guarantee proper water flow and drainage.

Lastly, scheduling regular professional maintenance services can significantly contribute to the prevention of spin and agitator issues. Expert technicians can inspect and service the internal components, check for potential problems, and perform necessary repairs or adjustments to optimize the machine’s performance.

Clean the Tub

Keeping the tub of your washing machine clean is essential for its optimal performance. Over time, dirt, detergent residue, and other impurities can accumulate inside the tub, resulting in unpleasant odors and potentially affecting the efficiency of the machine. Regularly cleaning the tub not only helps eliminate these problems but also ensures a hygienic environment for your laundry.

Here are some steps you can follow to effectively clean the tub of your washing machine:

1. Start by removing any items from the machine and wiping down the interior with a damp cloth to remove any loose debris.
2. Mix a solution of warm water and mild detergent or a laundry tub cleaner.
3. Using a sponge or cloth, thoroughly clean the interior of the tub, paying particular attention to the areas around the agitator or impeller.
4. Rinse the tub with clean water to remove any remaining cleaning solution.
5. To eliminate any lingering odors, you can also add a cup of white vinegar to a hot water cycle and run the machine without any laundry.
6. If there are stubborn stains or built-up residue in the tub, you can use a paste of baking soda and water to scrub the affected areas.
7. Once you have finished cleaning the tub, it is important to dry it thoroughly to prevent the growth of mold or mildew. Leave the lid or door of the machine open for some time to allow air circulation.
8. For best results, schedule regular cleanings of the tub, depending on the frequency of use and the type of laundry being washed.

By incorporating regular tub cleaning into your washing machine maintenance routine, you can extend the life of your appliance and ensure that your clothes are always clean and fresh. Remember to refer to the manufacturer’s instructions for specific cleaning recommendations for your particular machine model.

Regularly Inspect the Motor

In order to ensure proper functioning of your washing machine, it is important to regularly inspect the motor. The motor is a crucial component that powers the spinning and agitating functions of the machine. By conducting regular inspections, you can identify any potential issues or signs of wear and tear that may be affecting the motor’s performance. This proactive approach can help you avoid more serious problems down the line and extend the lifespan of your washing machine.

One important aspect to inspect is the motor’s electrical connections. Over time, these connections may become loose or corroded, hindering the flow of electricity and affecting the motor’s performance. Check for any loose wires or signs of corrosion, and ensure that all connections are securely fastened. If you do notice any issues, it is recommended to consult the manufacturer’s instructions or seek professional assistance to correctly address and fix the problem.

Another area to focus on during your motor inspection is the condition of the motor’s brushes. These brushes are responsible for conducting electricity to the motor’s armature, allowing it to rotate. Over time, the brushes can become worn down or damaged, leading to decreased performance or complete motor failure. Carefully examine the brushes for any signs of wear or damage, such as fraying or excessive carbon buildup. If necessary, replace the brushes to maintain optimal motor functioning.

Additionally, it is important to inspect the motor’s belt, if your washing machine is belt-driven. A worn or broken belt can cause the motor to malfunction, resulting in a machine that won’t spin or agitate. Inspect the belt for any signs of wear, such as cracks or fraying. If you notice any issues, consider replacing the belt to ensure proper motor operation.

Regularly inspecting the motor of your washing machine is an essential maintenance task that can help prevent issues and prolong the lifespan of your appliance. By paying attention to the motor’s electrical connections, brushes, and belt, you can address any potential problems in a timely manner and keep your machine running smoothly for years to come.

• Tags:
• machine
• motor
• washing
• agitate
• spin
• lid
• switch
• power
• belt
• issue