Guide to Fixing a Leaking Refrigerator - Easy Steps to Follow

A leaking refrigerator can be a frustrating problem to deal with. Not only can it cause water damage to your floors and cabinets, but it can also lead to spoiled food and a malfunctioning appliance. It’s important to address the issue as soon as possible to prevent further damage and inconvenience.

Step 1: Identify the Source of the Leak

The first step in dealing with a leaking refrigerator is to identify the source of the leak. Check the water supply line, located at the back of the refrigerator, to ensure it is not damaged or disconnected. Inspect the defrost drain, located at the bottom of the freezer, to see if it is clogged with debris. Also, check the refrigerator’s drip pan to see if it is overflowing. By pinpointing the source of the leak, you can determine the best course of action.

Step 2: Repair or Replace Damaged Parts

If you discover that the water supply line is damaged or disconnected, you will need to repair or replace it. This may require the assistance of a professional plumber or appliance repair technician. If the defrost drain is clogged, you can try clearing it with a pipe cleaner or pouring a mixture of hot water and vinegar down the drain. If the refrigerator’s drip pan is overflowing, you can empty it and clean it to prevent future leaks.

Step 3: Prevent Future Leaks

Once you have repaired or replaced any damaged parts and cleared any clogs, it’s important to take preventative measures to avoid future leaks. Regularly inspect the water supply line and defrost drain for any signs of damage or blockage. Clean the refrigerator’s coils and condenser fan regularly to ensure proper functioning. Also, be mindful of the amount of food and containers you have in your refrigerator, as overcrowding can put strain on the appliance and lead to leaks.

In conclusion, dealing with a leaking refrigerator requires identifying the source of the leak, repairing or replacing damaged parts, and taking preventative measures to avoid future leaks. By following this step-by-step guide, you can resolve the issue and ensure your refrigerator functions properly for years to come.

Section 1: Identifying the Source of the Leak

When dealing with a leaking refrigerator, the first step is to identify the source of the leak. This will help you determine the best course of action to take in order to repair the problem. Here are a few steps you can follow to identify where the leak is coming from:

1. Check the water supply line: Start by inspecting the water supply line that connects to the back of the refrigerator. Look for any signs of damage, such as cracks or leaks. If you find any issues with the water supply line, it may need to be replaced.

2. Examine the drip pan: The drip pan is located underneath the refrigerator and collects excess water that drips down from the freezer or refrigerator compartment. Check the drip pan for any cracks or damage that could be causing the leak. If the drip pan is damaged, it will need to be replaced.

3. Inspect the defrost drain: The defrost drain is responsible for draining excess water from the freezer during the defrosting process. If the defrost drain becomes clogged or blocked, it can cause water to leak out of the refrigerator. Use a pipe cleaner or a small brush to clear any debris from the defrost drain and ensure that it is clear.

4. Look for leaks around the door seals: Over time, the door seals on a refrigerator can wear out or become damaged, allowing cold air and moisture to escape. Check the door seals for any signs of leaks or damage. If you notice any issues with the door seals, they may need to be replaced.

5. Check the ice maker: If your refrigerator has an ice maker, it could be the source of the leak. Inspect the water line that connects to the ice maker for any cracks or damage. You should also check the ice maker itself for any issues, such as a malfunctioning valve or a clog in the water line.

Remember, if you’re not comfortable performing these inspections yourself or if you are unable to identify the source of the leak, it’s always best to call a professional refrigerator repair service for assistance.

Checking the Water Supply Line

If you notice that your refrigerator is leaking, one of the first things you should check is the water supply line. The water supply line is responsible for delivering water to your refrigerator’s ice maker and water dispenser. If there is a leak in the water supply line, it can cause water to pool underneath or around your refrigerator.

To check the water supply line, start by pulling the refrigerator away from the wall to access the back. Once you have access to the back of the refrigerator, visually inspect the water supply line for any signs of damage, such as cracks or leaks. It’s important to be thorough in your inspection, as even small cracks or leaks can lead to significant water leakage.

If you notice any damage to the water supply line, it will need to be replaced. You can purchase a new water supply line from an appliance store or online retailer. Make sure to choose a water supply line that is compatible with your refrigerator’s make and model.

Before replacing the water supply line, be sure to turn off the water supply to your refrigerator. This can usually be done by turning off the water valve that is connected to the line. Once the water supply is turned off, carefully disconnect the damaged water supply line from the refrigerator and the water source.

To install the new water supply line, simply connect one end to the refrigerator and the other end to the water source, making sure to secure the connections tightly. Once the connections are secure, turn the water supply back on and check for any leaks. If there are no leaks, push the refrigerator back into place and monitor it for any further signs of leakage.

If you are unsure about checking or replacing the water supply line yourself, it’s always recommended to seek assistance from a professional appliance repair technician. They will have the expertise and tools necessary to safely and effectively address any issues with your refrigerator’s water supply line.

Examining the Drain Pan

The drain pan is an important component of your refrigerator’s drainage system. It is located beneath the evaporator coils and is responsible for collecting and evaporating the water that accumulates during the defrosting process. If the drain pan is damaged or clogged, it can lead to water leakage in your refrigerator.

To examine the drain pan, you will need to remove the lower panel at the front or back of your refrigerator. Refer to your refrigerator’s manual for specific instructions on how to remove the panel.

Once you have removed the panel, visually inspect the drain pan for any signs of damage or cracks. If you notice any damage, the drain pan will need to be replaced. You can find a replacement drain pan at a local appliance store or by contacting the refrigerator manufacturer.

If the drain pan appears to be intact, check for any clogs or debris that may be causing the water to overflow. Gently remove any obstructions using a soft cloth or sponge. Avoid using sharp objects that may damage the drain pan or the evaporator coils.

After examining the drain pan, carefully place the lower panel back onto the refrigerator and secure it in place. It is important to make sure the panel is properly secured to prevent any future water leakage.

Note: If you are unsure or uncomfortable performing the inspection yourself, it is recommended to consult a professional technician to ensure proper diagnosis and repair of your leaking refrigerator.

Inspecting the Water Filter

One of the possible causes of a leaking refrigerator is a clogged or damaged water filter. To inspect the water filter, you will need to locate it. The water filter is usually found either behind the refrigerator or in the grille at the bottom front of the appliance.

Once you have located the water filter, carefully remove it from its housing. Check the filter for any signs of damage or clogs. Look for cracks, leaks, or excessive sediment build-up. If you notice any of these issues, it is likely that the water filter needs to be replaced.

If the water filter appears to be in good condition, you can also try flushing it out with clean water. This can help remove any debris or sediment that may be causing a clog. To do this, simply rinse the filter under running water and gently scrub it with a soft brush if necessary.

After inspecting and cleaning the water filter, reinstall it back into its housing. Make sure it fits properly and is secured in place. If the filter is damaged or too old, it is recommended to replace it with a new one. Refer to the refrigerator’s manual or consult a professional technician for guidance on finding and replacing the water filter.

Section 2: Fixing a Leaky Water Supply Line

If you have determined that the leaking in your refrigerator is coming from the water supply line, follow these steps to fix the issue:

Step 1: Turn off the water supply

The first thing you need to do is locate the water shut-off valve and turn off the water supply to the refrigerator. This valve is usually located behind the refrigerator or under the sink.

Step 2: Unplug the refrigerator

Before you start working on the water supply line, make sure to unplug the refrigerator from the power source to avoid any electrical risks.

Step 3: Remove the old water supply line

Next, you need to disconnect the old water supply line from the refrigerator’s water inlet valve. Use a wrench to loosen the compression nut and carefully remove the line.

Step 4: Inspect the water supply line

Inspect the old water supply line for any cracks, leaks, or damages. If you notice any issues, it is recommended to replace the entire line to ensure a proper fix.

Step 5: Install a new water supply line

Get a new water supply line that matches the specifications of your refrigerator. Attach one end of the line to the refrigerator’s water inlet valve and tighten the compression nut with a wrench.

Step 6: Connect the other end of the line

Depending on your setup, you may need to connect the other end of the water supply line to a water source, such as a wall valve or a water filter. Ensure a secure connection to prevent any future leaks.

Step 7: Turn on the water supply

After the new water supply line is securely in place, turn on the water supply by opening the shut-off valve. Keep an eye on the connections and check for any leaks.

Step 8: Plug in the refrigerator

Finally, plug the refrigerator back into the power source and wait for it to cool down. Check for any signs of leaking and monitor the area for a few hours to ensure the issue is completely resolved.

Note: If you are unsure about any of these steps or if the leaking persists after attempting this solution, it is recommended to consult a professional appliance repair technician.

Shutting Off the Water Supply

When dealing with a leaking refrigerator, one of the first steps you should take is to stop the water supply to prevent further damage. Here is a step-by-step guide on how to shut off the water supply:

1. Locate the water shut-off valve: The water shut-off valve is usually located behind or near the refrigerator. It is a small valve connected to a water line.
2. Turn off the valve: To shut off the water supply, turn the valve clockwise (right) until it is completely closed. This will stop the flow of water to the refrigerator.
3. Check for leaks: After shutting off the water supply, take a moment to inspect the valve and surrounding area for any signs of leaks. If you notice any leaks, you may need to replace the valve or call a professional for assistance.

By shutting off the water supply, you can prevent further water damage and ensure that your leaking refrigerator issue does not worsen. Remember to take caution and always seek professional help if needed.

Replacing the Water Supply Line

If your refrigerator is leaking water, it could be due to a faulty water supply line. Replacing the water supply line is a relatively simple process that can be done in a few steps. Here’s how to do it:

1. Turn off the power to the refrigerator. This is an important safety precaution to avoid any electrical shocks.

2. Locate the water supply line. It is usually located at the back of the refrigerator, near the bottom. You may need to move the refrigerator away from the wall to access it.

3. Shut off the water supply. There should be a valve near the water supply line that you can turn off to stop the flow of water.

4. Disconnect the old water supply line. Most supply lines are connected with compression fittings or quick connect fittings. Use a wrench or pliers to loosen the fittings and disconnect the line from the refrigerator.

5. Install the new water supply line. Slide the compression nut onto the new line and connect it to the refrigerator by tightening the fitting. If you have a quick connect fitting, simply push the line firmly into the fitting until it clicks into place.

6. Turn on the water supply. Open the valve to restore the flow of water to the refrigerator.

7. Check for leaks. Run the refrigerator for a few minutes and inspect the new water supply line for any leaks. If you notice any leaks, tighten the fittings further or replace the line if necessary.

8. Move the refrigerator back into place. Once you are sure that there are no leaks, you can move the refrigerator back against the wall.

By following these steps, you can easily replace the water supply line and solve the issue of a leaking refrigerator. However, if you are unsure about any part of the process, it is always best to consult a professional technician for assistance.

Testing for Leaks

Before you can begin fixing a leaking refrigerator, you need to determine where the leak is coming from. Follow these steps to test for leaks:

1. Remove any food or items from the refrigerator and freezer compartments. Place them in a cooler to keep them fresh.
2. Unplug the refrigerator from the power source to prevent any potential electrical hazards.
3. Locate the water supply valve that feeds water to the refrigerator. This valve is typically located behind the unit or under the sink.
4. Turn off the water supply by rotating the valve clockwise. This will shut off the water flow to the refrigerator.
5. Inspect the water supply line for any visible leaks or damages. Feel the line with your hand to check for any moisture.
6. Check the fittings and connections between the water supply line and the refrigerator. Make sure they are tight and secure.
7. Turn the water supply back on by rotating the valve counterclockwise. Keep an eye out for any leaks or drips.
8. Observe the interior of the refrigerator for signs of leakage. Look for any pooling water, wet spots, or ice buildup.
9. Run your fingers along the door seals to check for any gaps or tears. Damaged seals can cause condensation and leakage.
10. Inspect the drain pan located at the bottom of the refrigerator. Remove any debris or blockages that may be preventing proper water drainage.

If you find any leaks during the testing process, take note of their location and severity. This information will help you with the troubleshooting and repair steps that will follow.

Remember to always exercise caution when working with electrical appliances and water sources. If you are unsure about any of the testing procedures or encounter a more serious issue, it is best to seek professional assistance.

Section 3: Cleaning and Clearing the Drain Pan

One of the common causes of a leaking refrigerator is a clogged or dirty drain pan. The drain pan is located at the bottom of the refrigerator and collects condensation and water from the defrost cycle. Over time, debris and gunk can accumulate in the pan, leading to blockage and water overflow.

To clean and clear the drain pan, follow these steps:

Step 1: Unplug the refrigerator from the power source to ensure your safety.

Step 2: Locate the drain pan. It is usually located at the bottom of the refrigerator, behind the grille or kickplate. Some models may have a removable panel for easy access.

Step 3: Once you have found the drain pan, carefully remove it from its position. Be cautious not to spill any water that may be inside.

Step 4: Empty and dispose of any water or liquid present in the drain pan. You can pour it down the sink or toilet, or use a bucket to collect and discard it.

Step 5: Rinse the drain pan with warm water and mild detergent to remove any accumulated dirt and grime. Use a brush or sponge to scrub the pan gently.

Step 6: After cleaning, thoroughly rinse the drain pan and remove any soap residue. Make sure it is completely dry before placing it back in the refrigerator.

Step 7: Inspect the drain opening in the refrigerator for any debris or blockages. Use a pipe cleaner or a soft brush to clear out any obstructions.

Step 8: Once the drain pan and drain opening are clean, carefully place the drain pan back into its position in the refrigerator.

Step 9: Plug the refrigerator back into the power source and turn it on. Check for any signs of leakage and monitor the drain pan in the following days to ensure it remains clear.

Note: If you are unsure about any of the steps or have difficulty accessing the drain pan, it is recommended to consult the refrigerator’s user manual or contact a professional for assistance.

By regularly cleaning and clearing the drain pan, you can prevent leaks and keep your refrigerator running efficiently.

Removing the Drain Pan

To remove the drain pan from your leaking refrigerator, follow these steps:

1. Unplug the refrigerator from the power source to ensure your safety.
2. Locate the drain pan, which is typically located at the bottom of the unit.
3. Slide the drain pan out from its position, being careful not to spill any liquid that may be inside.
4. If the drain pan is full, carefully empty its contents into a sink or drain.
5. Clean the drain pan using warm soapy water or a mixture of water and vinegar.
6. Rinse the drain pan thoroughly to remove any residue.
7. Allow the drain pan to dry completely before placing it back into the refrigerator.
8. Once the drain pan is dry, carefully slide it back into its original position.
9. Plug the refrigerator back into the power source.

Removing the drain pan and cleaning it regularly can help prevent leaks and unpleasant odors from occurring in your refrigerator.

Cleaning the Drain Pan

The drain pan in a refrigerator is responsible for collecting and draining excess water that accumulates during the defrosting process. Over time, the drain pan can become dirty and filled with debris, leading to unpleasant odors and potential blockages. Cleaning the drain pan is an important step in maintaining the efficiency and functionality of your refrigerator.

Here are the steps to properly clean the drain pan:

1. Unplug the refrigerator from the power source to ensure your safety.
2. Locate the drain pan. In most refrigerators, it can be found at the bottom, behind the front grille, or under the unit. Refer to your refrigerator’s user manual for specific instructions.
3. Remove the drain pan carefully. It may be full of water or dirty, so be sure to place a towel or container underneath to catch any spills.
4. Dispose of any accumulated water and debris from the drain pan.
5. Wash the drain pan with warm soapy water. Use a sponge or cloth to scrub away any dirt or residue.
6. Rinse the drain pan thoroughly with clean water to remove any soap residue.
7. Dry the drain pan completely before placing it back into the refrigerator.
8. Check for any cracks or damage on the drain pan. If you notice any, it may need to be replaced.
9. Once the drain pan is clean and dry, carefully place it back into its original position.
10. Plug the refrigerator back into the power source and ensure it is functioning properly.

By regularly cleaning the drain pan of your refrigerator, you can prevent mold and bacteria growth, eliminate unpleasant odors, and maintain the efficiency of your appliance. It is recommended to clean the drain pan at least once every six months or more frequently if necessary.

Reinstalling the Drain Pan

Once you have cleaned and examined the drain pan, it’s time to reinstall it. Follow these steps to properly reinstall the drain pan in your leaking refrigerator:

1. Make sure the drain pan is clean and free of any debris or residue.
2. Position the drain pan so that it aligns with the drainage hole in the refrigerator.
3. Carefully slide the drain pan into place, ensuring that it fits snugly and securely.
4. If there are any hooks or clips on the drain pan, make sure they are properly attached to the refrigerator’s frame.
5. Double-check that the drain pan is in the correct position and does not obstruct any other components of the refrigerator.
6. Once you are confident that the drain pan is properly installed, close the refrigerator door.
7. Test your refrigerator by running it for a while and monitoring if any leaks occur.

By following these steps, you should be able to reinstall the drain pan effectively. Remember, it is essential to keep the drain pan clean and functioning correctly to prevent any leakage issues in the future.

Section 4: Changing the Water Filter

If you have a refrigerator with a water dispenser or an ice maker, it likely has a water filter that needs to be changed periodically. The water filter plays an important role in ensuring that the water dispensed from your refrigerator is clean and safe to consume. Here are the steps to follow to change the water filter:

1. Locate the water filter. In most refrigerators, the water filter is located at the bottom of the refrigerator compartment, near the back wall. Refer to your refrigerator’s user manual if you are having trouble finding it.
2. Turn off the water supply. Before you begin the filter replacement process, it is important to shut off the water supply to your refrigerator. This can usually be done by turning off the valve at the water line connected to the refrigerator.
3. Remove the old water filter. Depending on the model of your refrigerator, you may need to twist, unscrew, or pull out the old filter. Follow the instructions provided in your user manual or on the filter itself.
4. Prepare the new water filter. Take the new water filter out of its packaging and remove any protective coverings. Some filters may require soaking in water before installation, so consult the instructions provided with the filter.
5. Install the new water filter. Insert the new filter into the filter housing, making sure it is properly aligned. Again, refer to the instructions for your specific refrigerator model to ensure correct installation.
6. Prime the new water filter. After installing the new filter, it is important to prime or flush it to remove any air or impurities. This can usually be done by running several cups of water through the dispenser until the water flows smoothly.
7. Reset the filter indicator. Many refrigerators have a filter indicator light that reminds you when it’s time to change the filter. After replacing the filter, press and hold the reset button (if provided) to reset the indicator.
8. Turn on the water supply. Once you have completed the filter replacement process, turn the water supply back on and check for any leaks. Allow the refrigerator to dispense a few cups of water to ensure that the system is functioning properly.

Changing the water filter in your refrigerator is an important maintenance task that ensures the quality of the water you consume. By following these steps, you can easily replace the filter and continue enjoying clean and fresh water from your refrigerator.

Locating the Water Filter

One of the first steps in dealing with a leaking refrigerator is to locate the water filter. The water filter is an essential component of the refrigerator’s water dispensing system, and it may be the source of the leak. Here’s what you need to do:

Step 1: Check your refrigerator’s owner’s manual for information on where the water filter is located. The location can vary depending on the model and brand of your refrigerator. If you don’t have the manual, you can usually find it online on the manufacturer’s website.

Step 2: Once you know where the water filter is located, open the refrigerator door and locate the filter housing. The housing is usually located in the upper right or left corner of the refrigerator compartment. It may be covered by a plastic or metal cover that needs to be removed. Use a screwdriver or your hands to remove the cover.

Step 3: Once the cover is removed, you should see the water filter. The filter may be a cartridge-type filter or a push-in filter. Cartridge-type filters usually have a knob or handle that can be turned or pulled out to remove the filter. Push-in filters can be removed by pressing a button or pulling a tab. Refer to your owner’s manual for specific instructions on how to remove the filter.

Step 4: After removing the filter, inspect it for any signs of damage or leaks. Check the filter housing for any cracks or leaks as well. If you find any issues with the filter or housing, they may need to be replaced. Make sure to purchase the correct filter for your refrigerator model.

Step 5: If the filter and housing appear to be in good condition, carefully reinsert the filter back into the housing. Make sure it is properly seated and secured. If it is a cartridge-type filter, turn or push it in until it clicks into place. If it is a push-in filter, simply insert it until it stops.

Step 6: Replace the cover on the filter housing and make sure it is securely fastened. Close the refrigerator door and check for any signs of leaks. If the leak persists, there may be another issue causing it, and it may be necessary to call a professional technician to assess and repair the problem.

By locating the water filter and inspecting it for any issues, you can take the necessary steps to resolve a leaking refrigerator. Remember to consult your owner’s manual for specific instructions and to always exercise caution when working with appliances.

Removing the Old Water Filter

To begin with, make sure you locate the water filter in your refrigerator. It is usually located either in the upper right corner or in the lower grille. Refer to your refrigerator’s manual for specific instructions on finding the water filter.

Once you have located the water filter, gently pull it towards you to release it from the housing. Be careful not to apply excessive force, as this could damage the filter or the housing.

If you are having trouble removing the filter, check to see if there is a cap or cover that needs to be unscrewed or lifted. Some filters have a twist and lock mechanism that requires a counterclockwise twist to remove.

After successfully removing the filter from the housing, place it in a plastic bag or wrap it in a towel to prevent any water from leaking out. Dispose of the old filter properly according to your local regulations or manufacturer’s instructions.

Remember to check the condition of the old filter before disposing of it. If it is dirty or clogged, it is a good indication that it needed to be replaced. This step is crucial to maintain the optimal performance of your refrigerator and ensure the quality of the filtered water.

Finally, close the filter housing by pushing it back into place until you hear a click or feel it lock. Make sure it is securely in place to prevent any water leaks.

Now that you have successfully removed the old water filter, you are ready to install a new one. Refer to the next section of this guide for step-by-step instructions on how to install a new water filter.

Installing a New Water Filter

If your refrigerator has a water dispenser and ice maker, it is equipped with a water filter to remove impurities from the water. Over time, the water filter can become clogged or worn out, resulting in reduced water flow or poor water quality. In such cases, it is important to install a new water filter to ensure clean and fresh-tasting water.

Here is a step-by-step guide on how to install a new water filter in your refrigerator:

1. Locate the water filter compartment. The location can vary depending on the make and model of your refrigerator. It is typically found inside the refrigerator, either at the back wall or in the bottom grille.
2. Once you have located the water filter compartment, open it by pulling or pushing the release tab or cover. This will expose the old water filter.
3. Remove the old water filter by twisting it counterclockwise. Some models may have a button or a lever that needs to be pressed to release the filter.
4. Before installing the new water filter, remove any protective caps or seals present on the filter.
5. Align the new water filter with the filter housing and insert it into the compartment. Rotate it clockwise until it locks into place. Some models may require a quarter or half turn to secure the filter.
6. Close the water filter compartment by pushing or snapping the cover back into place.
7. Run water through the dispenser for a few minutes to flush out any air or impurities in the new filter.
8. Check for any leaks or drips around the filter and make sure everything is properly sealed.
9. Reset the water filter indicator light on your refrigerator, if applicable. Consult the owner’s manual for instructions on how to reset the indicator.

Once you have successfully installed the new water filter, you can enjoy clean and refreshing water from your refrigerator’s dispenser and ice maker. It is recommended to replace the water filter every six months or according to the manufacturer’s instructions to maintain optimal performance.

Remember to keep track of when you installed the new water filter so that you can replace it in a timely manner when the time comes.

Section 5: Unclogging the Drain Pipe

If your refrigerator is leaking water, a common cause could be a clogged drain pipe. The drain pipe is responsible for carrying away condensation that forms inside the fridge. When this pipe gets clogged, water will begin to pool in the bottom of the refrigerator and eventually leak out.

To unclog the drain pipe, you will need the following materials:

• A small funnel
• A pan or bucket
• A pipe cleaner or a straightened coat hanger

Here are the steps to unclog the drain pipe:

Step 1: Begin by unplugging your refrigerator from the power source to ensure your safety.

Step 2: Locate the drain pipe, which is usually found at the back of the refrigerator or inside the freezer compartment. It is a small hole or tube that leads towards the bottom of the fridge.

Step 3: Place the pan or bucket underneath the drain pipe to catch any water that may leak out during the unclogging process.

Step 4: Using the small funnel, pour warm water into the drain pipe. This will help soften any clogs and potentially flush them out.

Step 5: If the warm water does not clear the clog, use a pipe cleaner or a straightened coat hanger to gently push out any debris. Be careful not to apply too much force, as this can damage the pipe.

Step 6: Once the clog is cleared, pour some more warm water down the drain pipe to ensure that it is fully unclogged. You should see water flowing freely into the pan or bucket.

Step 7: Finally, plug your refrigerator back into the power source and check for any leaks. If the leaking issue persists, you may need to consult a professional for further assistance.

Note: It’s important to regularly clean the drain pipe and remove any debris to prevent future clogs. This can be done by pouring a mixture of warm water and vinegar down the pipe every few months.

By following these steps, you should be able to unclog the drain pipe in your refrigerator and stop any leaking issues. Remember to always prioritize safety and consult a professional if needed.

• Tags:
• water
• refrigerator
• drain
• filter
• leak
• pan
• supply
• line
• remove
• locate